Hello
I would like to see a copy
Thanks
-pete
On Tue, Jul 26, 2016 at 4:18 PM, Electronics Plus wrote:
> Another fellow is slimming his warehouse. There are 4 pallets, and I have a
> spreadsheet. Every item has been tested, and there are comments, from "Works
> OK" to "loud noise and smells bu
Related to the RT-11 discussion, there is currently work going on to have a
simulated VT240 in MAME
working with RT-11 running in SIMH.
http://forums.bannister.org/ubbthreads.php?ubb=showflat&Number=106655#Post106655
On 7/26/2016 7:17 PM, Jerome H. Fine wrote:
On Sunday, July 24th, 2016 at 14::29:59 -0700, Don North wrote:
>On 7/24/2016 8:06 AM, william degnan wrote:
>On Jul 24, 2016 8:58 AM, "Jerome H. Fine" wrote:
>On Wednesday, July 20th, 2016 at 18:02:44 - 0400, william degnan wrote:
Is there a mi
I forgot to remove the "Spam Key" notice that my ISP puts into most of
my e-mail when I replied the first time - I apologize!!!
>On Sunday, July 24th, 2016 at 14::29:59 -0700, Don North wrote:
>On 7/24/2016 8:06 AM, william degnan wrote:
>On Jul 24, 2016 8:58 AM, "Jerome H. Fine"
wrote:
On
On Sunday, July 24th, 2016 at 14::29:59 -0700, Don North wrote:
>On 7/24/2016 8:06 AM, william degnan wrote:
>On Jul 24, 2016 8:58 AM, "Jerome H. Fine"
wrote:
>On Wednesday, July 20th, 2016 at 18:02:44 - 0400, william degnan
wrote:
Is there a minimum memory requirement for RT-11 v5? I wa
On Tue, Jul 26, 2016 at 8:53 AM, Dennis Boone wrote:
> A collection of intel floppies containing software related to the 432
> processor was identified and purchased by Nigel Williams. I made flux
> images of the diskettes some time ago, but have failed to assemble the
> attention span to decode
Hi folks,
This a long shot but worth an ask. Has anyone got a pair of Epson SD521
5.25" drives going spare? I have two in a Memotech FDX disk subsystem that
appear to have gone south on me, and while I can swap out for any other
DS/DD drive it'd be nice restore it using original spares.
The SD521
Another fellow is slimming his warehouse. There are 4 pallets, and I have a
spreadsheet. Every item has been tested, and there are comments, from "Works
OK" to "loud noise and smells burnt".
Primarily old Apple gear, but there are also 2 NIB Tandon TM848-E 8" floppy
drives. If you want to see the
> From: "william degnan"
> Subject: Re: memory map for RT-11 v 5
>
> Is there a place where one can get RT11 disks for RL02? I only have rt-11
> 5.3 and even with 64K I can't get my system to boot. Everything so far
> checks out, I am at a loss to determine the cause of the problem. In simh
That is a SCSI enclosure built on a 95 frame.
https://www.youtube.com/watch?v=az7Sg0EHr5E
This made sense with small capacity drives, but when you could stuff 1GB
or bigger drives into a 95, it wasn't so appealing. IBM came out with
OBI SCSI enclosures that cost less to make. 3517?
If you lo
This manual shows two ways that the 11/84 console SLU panel can be mounted:
http://www.bitsavers.org/pdf/dec/pdp11/1184/EK-1184A-TM-PR2_May85.pdf
Page 5-40 (page 245 of the PDF) shows the 11/84 cabinet style console
SLU panel where it is mounted on a separate rack width panel across
the rear of t
A collection of intel floppies containing software related to the 432
processor was identified and purchased by Nigel Williams. I made flux
images of the diskettes some time ago, but have failed to assemble the
attention span to decode most of them.
Technical details:
These are 8" diskettes, wri
>On Tuesday, July 26th, 2016 at 0:05:48 -0500, Glen Slick wrote:
I just acquired a PDP-11/84 that didn't come with a console panel.
That should have a 25-pin D-shell connector for the console serial
port, a baud rate selection switch, and a forced dialog switch, with a
single 20-pin connector fo
On Jul 26, 2016 6:11 AM, "Noel Chiappa" wrote:
>
> >> a baud rate selection switch
>
> > That turns out to be purely off-board (using a clock on the card,
and
> > the 'external clock' option on the CPU (same as the 11/23+).
>
> Ooops, my mistake - I _thought_ it was the same as the -11
>> a baud rate selection switch
> That turns out to be purely off-board (using a clock on the card, and
> the 'external clock' option on the CPU (same as the 11/23+).
Ooops, my mistake - I _thought_ it was the same as the -11/23+, but now that I
look, it brings the baud rate selection
> From: Glen Slick glen.slick at gmail.com
> a PDP-11/84 that didn't come with a console panel.
You should be able to get it running without the DEC panel (I have certainly
run M8190 cards in an 11/23 chassis, without the front panel); the serial
connection is the same as the DLV11-J, e
On Mon, Jul 25, 2016 at 6:31 PM, Jay West wrote:
> WillD wrote...
> --
> Is there a place where one can get RT11 disks for RL02?
> --
>
> Aren't one of these RL02 under RT11/dists?
> http://www.classiccmp.org/PDP-11/
>
> J
>
>
>
Thanks Jay. I can use PDPGUI...assuming my system can build
> On Jul 25, 2016, at 8:03 PM, Michael Thompson
> wrote:
>
> During our PDP-12 debugging today we found that the left tape head has an
> open coil for data track 0. The left head was OK a little more than a year
> ago when we found the open coil in the right head. One TU56 head on my
> personal
WillD wrote...
--
Is there a place where one can get RT11 disks for RL02?
--
Aren't one of these RL02 under RT11/dists? http://www.classiccmp.org/PDP-11/
J
Den 2016-07-25 kl. 14:37, skrev Camiel Vanderhoeven:
Op 25 jul. 2016 2:25 p.m. schreef "Göran Axelsson" :
My guess so far is that there is a problem with reading and writing to
the memory. The problem is that I have no documentation over the memory
module except a drawing of the circuitry used
During our PDP-12 debugging today we found that the left tape head has an
open coil for data track 0. The left head was OK a little more than a year
ago when we found the open coil in the right head. One TU56 head on my
personal PDP-8/e also had an open coil when I got it.
Our guess is the chemica
Is there a place where one can get RT11 disks for RL02? I only have rt-11
5.3 and even with 64K I can't get my system to boot. Everything so far
checks out, I am at a loss to determine the cause of the problem. In simh
I can boot 5.3 on a PDP 11/20 emulated with 32K. It must be my system but
I
22 matches
Mail list logo