On 8/23/21 5:38 PM, Tom Stepleton via cctalk wrote:
Have a look at the instruction set for the STAR-100:
http://bitsavers.org/pdf/cdc/cyber/cyber_200/60256000_STAR-100hw_Dec75.pdf
I'm not quite sure if I've ever used a system with more
instructions+variations.
--Chuck
On 8/23/21 7:38 PM, Tom Stepleton via cctalk wrote:
Hello,
For the sake of illustration to folks who are not necessarily used to
thinking about what computers do at the machine code level, I'm interested
in collecting examples of single instructions for any CPU architecture that
are unusually
> I'm interested in collecting examples of single instructions for any CPU
> architecture that are unusually prolific in one way or another.
The Prime 50 Series has a few candidates:
1. The procedure call instruction allocates a stack frame, saves the
calling procedure's state, then
>Hello,
>
>For the sake of illustration to folks who are not necessarily used to
>thinking about what computers do at the machine code level, I'm interested
>in collecting examples of single instructions for any CPU architecture that
>are unusually prolific in one way or another. This request is
On Tue, 2021-08-24 at 01:38 +0100, Tom Stepleton via cctalk wrote:
> For the sake of illustration to folks who are not necessarily used to
> thinking about what computers do at the machine code level, I'm
> interested
> in collecting examples of single instructions for any CPU
> architecture that
On 2021-08-23 7:09 p.m., Paul Koning via cctalk wrote:
On Aug 23, 2021, at 8:38 PM, Tom Stepleton via cctalk
wrote:
Hello,
For the sake of illustration to folks who are not necessarily used to
thinking about what computers do at the machine code level, I'm interested
in collecting
> On Aug 23, 2021, at 8:38 PM, Tom Stepleton via cctalk
> wrote:
>
> Hello,
>
> For the sake of illustration to folks who are not necessarily used to
> thinking about what computers do at the machine code level, I'm interested
> in collecting examples of single instructions for any CPU
Hello,
For the sake of illustration to folks who are not necessarily used to
thinking about what computers do at the machine code level, I'm interested
in collecting examples of single instructions for any CPU architecture that
are unusually prolific in one way or another. This request is highly
Cool. It wasn’t working that well when I tried.
> On Aug 23, 2021, at 12:35, Paul Koning wrote:
>
> Mac OS, 64 bit Intel until recently, Arm64 right now. It's still the Intel
> build, that works impressively well through Rosetta 2. The current version
> is 0.19. I haven't run into
On 8/23/21 1:19 PM, Alan Perry via cctalk wrote:
What OS were you running it on? When I first started trying to use it a couple
years ago on a Mac, it didn’t work so well. I started trying to make it work
better and then realized that I was spending most of my time trying to make the
tool
Rob,
I asked on the Radio Club net. The other program mentioned RS Design Spark
https://www.rs-online.com/designspark
Dave
G4UGM
> -Original Message-
> From: cctalk On Behalf Of Rob Jarratt via
> cctalk
> Sent: 23 August 2021 17:29
> To: General Discussion: On-Topic and Off-Topic Posts
Mac OS, 64 bit Intel until recently, Arm64 right now. It's still the Intel
build, that works impressively well through Rosetta 2. The current version is
0.19. I haven't run into significant issues with it for quite a while. It's
been pretty solid since 0.14 in my usage. That's a bit off
The quick-'n-easy solution I found when I needed to model some parts
for a keyboard was https://www.tinkercad.com/ - needs a modern-ish web
browser and a modestly beefy system tho.
On 23/08/2021 17:29, Rob Jarratt via cctalk wrote:
I think I may need to get a small part 3d printed (some plastic board
mounting guide rails from a PDP 11/24 H7140 PSU). What software is best for
a novice? Preferably free!
The hobbyist version of Fusion 360 is free. It's what I use. I've
What OS were you running it on? When I first started trying to use it a couple
years ago on a Mac, it didn’t work so well. I started trying to make it work
better and then realized that I was spending most of my time trying to make the
tool work and not so much time modeling the part that I was
I think I may need to get a small part 3d printed (some plastic board
mounting guide rails from a PDP 11/24 H7140 PSU). What software is best for
a novice? Preferably free!
Thanks
Rob
I use the web version of Sketchup 3D. It's now owned by Trimble. It gets
me by for making project boxes and
If you prefer programming, OpenSCAD https://openscad.org/ might be the
3D modeling software for you.
HTH
--
Regards,
Torfinn Ingolfsen
On Mon, 23 Aug 2021, Alan Perry via cctalk wrote:
I use Fusion360. It is free for hobbyists and students.
...for now. Pray Autodesk doesn't alter the deal further. Again.
For a true, completely offline, free parametric design package, take a
look at Solid Edge 2020 Community Edition. The
I haven't used it for 3d printing work, but from other use I can recommend
FreeCAD3d. That is open source software, so free for everyone, not just for
"students".
It has a GUI, and it can also be scripted using Python, which is a great way to
construct very complex models. I've used it to
I use Fusion360. It is free for hobbyists and students.
alan
> On Aug 23, 2021, at 09:34, Rob Jarratt via cctalk
> wrote:
>
> I think I may need to get a small part 3d printed (some plastic board
> mounting guide rails from a PDP 11/24 H7140 PSU). What software is best for
> a novice?
I think I may need to get a small part 3d printed (some plastic board
mounting guide rails from a PDP 11/24 H7140 PSU). What software is best for
a novice? Preferably free!
Thanks
Rob
I've got a very nice SV-328 that's had the sad misfortune of having the
"K" key rather violently removed. (https://i.imgur.com/IxBIQTj.jpg)
Can someone point me to where I could obtain a replacement key top and
post?
Thanks!
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com -
On Sun, 22 Aug 2021 at 23:42, Fred Cisin via cctalk
wrote:
>
> >> The answer to the question is Hydra I believe.
>
> On Sun, 22 Aug 2021, Liam Proven via cctalk wrote:
> > But since you are not replying to anything, we don't know what the
> > question _was_ ...
>
> If "drugs, sex, and
Thanks Warner and Ethan. That is very helpful.
I had not realised that the partition sizes were REALLY hard wired - as in
set in the code. That explains why there is no option to set the size at
installation time.
I will redo the installation with that in mind.
Cheers
Peter
On Fri, 20 Aug
24 matches
Mail list logo