>Brian Walenz wrote:
How the heck do you copy an RX02 disk for use in simh?
I've been trying to transfer RX02 images between simh and a real PDP11
(that has only two RX02's, console, and ethernet). So far, I've only
attempted sending an RX02 image from the PDP to simh, but simh fails to
read
On Sun, Mar 6, 2016 at 2:17 PM, Brian Walenz wrote:
>
>
> http://www.dbit.com/putr/putr.asm has the following:
>
> ;
> ; RX01 interleave routine.
> ;
> ; bplogical device rec
> ; chcylinder (0-75.)
> ; cllogical sector (0-25.)
> ;
> ; On return:
> ; chcylinder
On Sun, Mar 6, 2016 at 5:06 PM, Don North wrote:
> From the SIMH pdp11 RX driver (pdp11_rx.c) the disk size is computed as
> follows,
> and the byte offset into the file is computed by CALC_DA(trk,sec) given
> the PHYSICAL
> track (0..76) and sector (1..26) addresses used in
On 3/6/2016 8:56 AM, Brian Walenz wrote:
How the heck do you copy an RX02 disk for use in simh?
I've been trying to transfer RX02 images between simh and a real PDP11
(that has only two RX02's, console, and ethernet). So far, I've only
attempted sending an RX02 image from the PDP to simh, but
On Sun, Mar 6, 2016 at 3:33 PM, Mattis Lind wrote:
>
> Did you have problems with my RAW files as well? Which? I tested a few of
> them right now and they seemed to work fine.
>
Nope, no problems. That was what triggered this...that someone else could
do it.
I jury
>Brian Walenz wrote:
How the heck do you copy an RX02 disk for use in simh?
I've been trying to transfer RX02 images between simh and a real PDP11
(that has only two RX02's, console, and ethernet). So far, I've only
attempted sending an RX02 image from the PDP to simh, but simh fails to
read
2016-03-06 17:56 GMT+01:00 Brian Walenz :
> How the heck do you copy an RX02 disk for use in simh?
>
> I've been trying to transfer RX02 images between simh and a real PDP11
> (that has only two RX02's, console, and ethernet). So far, I've only
> attempted sending an RX02 image
On Sun, Mar 6, 2016 at 10:33 AM, Mark J. Blair wrote:
> I have managed to munge RX02 disk images into a format that SIMH understands
> a year or so ago. Unfortunately, I didn't keep notes about how I did it, and
> now I've forgotten what I did, possibly using some throw-away code
I have managed to munge RX02 disk images into a format that SIMH understands a
year or so ago. Unfortunately, I didn't keep notes about how I did it, and now
I've forgotten what I did, possibly using some throw-away code that I've since
thrown away. Or maybe I dumped the disks to image files on
How the heck do you copy an RX02 disk for use in simh?
I've been trying to transfer RX02 images between simh and a real PDP11
(that has only two RX02's, console, and ethernet). So far, I've only
attempted sending an RX02 image from the PDP to simh, but simh fails to
read it: "?DIR-F-Invalid
10 matches
Mail list logo