They do not make bipolar proms any more.
you can find them on ebay sometimes
some functions can be emulated by fast pals.
but not code storage.
Old arcade games use them for all sorts of things.
some old arcade game repair sites also sell the ICs
Jay, Mike, John,
Thanks for the helpful information. It just dawned onto me that these were
"write once" PROMs, not modern EEPROMs. Duh. So you get one shot at doing it
right...
The Data I/Os on ebay seem to be quite a bit more than $100 right now, I'll
keep looking. I guess none of the modern
List of blank for 21MX and microcode :
That would be very usefull. Thanks in advance
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www.avast.com/antivirus
On Thu, 3 Sep 2015, Jay West wrote:
Marc wrote
HP 1000. Not only the standard 24 pin ROMs but the small 14 or 16 pin
bootloader ROMs that Jay showed me at VCF. What would be a good ROM
programmer that could read and write these of older HP equipment ROMs?
---
The Data I/O 29B
On 09/03/2015 4:56 AM, Vlad Stamate wrote:
While I was trying to read the ROM in my 9121 for Eric Smith I found
out that my Wellon VP-280 could not do it (it could not recognize it
and only read FF FF FF FF). I could use it however to dump the ROM of
an IBM PS2 that I cannot boot anymore (so it
While I was trying to read the ROM in my 9121 for Eric Smith I found
out that my Wellon VP-280 could not do it (it could not recognize it
and only read FF FF FF FF). I could use it however to dump the ROM of
an IBM PS2 that I cannot boot anymore (so it is not entirely useless).
So I am asking
Marc wrote
HP 1000. Not only the standard 24 pin ROMs but the small 14 or 16 pin
bootloader ROMs that Jay showed me at VCF. What would be a good ROM
programmer that could read and write these of older HP equipment ROMs?
---
The Data I/O 29B works perfectly for those old fusable link
On Thu, Sep 3, 2015 at 6:57 PM, Vlad Stamate wrote:
> I am not sure about the part number it was under the sticker with the
> ROM version (which btw was 09121 15510 REV A) and I put it back into
> the unit.
The PCA silkscreen diagram in the service manual shows F2364,
You may know all of this but just in case ...Assuming you have reader that
can detect ROM type and compatible with ROM you are trying to read. May be
jumper change required? For example my Logical Systems Shooter has a
different jumper thay must be installed for each EPROM type.
Bill Degnan
but the
small 14 or 16 pin bootloader ROMs that Jay showed me at VCF. What would be
a good ROM programmer that could read and write these of older HP equipment
ROMs?
Marc
---
From: Vlad Stamate <vlad.stam...@gmail.com>
Subject: Reading ROMs
While I was trying to read the ROM
10 matches
Mail list logo