From [EMAIL PROTECTED] Sun Apr 11 18:08:09 2004
Can one criticize dvd+rw-tools for so to say sweeping the bug under the
carpet, which might have indirectly complicated life for other
applications and their developers? Well, one could *if* it was done
silently. But it wasn't. Thorough problem
From: Julien Gabel [EMAIL PROTECTED]
Ok. The media I bought are as follow:
- TDK DVD-RW single-sided Data/Video 4.7GB 1-2x;
- TDK DVD-R single-sided Data/Video 4.7GB 1-4x.
Is there anything wrong whith these types of media? Advices?
The medium quality should be OK. So it should become
From: Geoffrey [EMAIL PROTECTED]
Your message is not helpful at all! Why did you send it?
Because you are harsh to everyone, whether they are new to the list, old
to the list, have any expertise or none. The purpose of my posting was
to urge the poster to continue to pursue his problems,
Joerg Schilling wrote:
From: Geoffrey [EMAIL PROTECTED]
Your message is not helpful at all! Why did you send it?
Because you are harsh to everyone, whether they are new to the list, old
to the list, have any expertise or none. The purpose of my posting was
to urge the poster to continue to
On Tue, Apr 13, 2004 at 01:24:51PM -0400, Geoffrey wrote:
That being said, I'll not take up any more of your precious time with
further responses to this thread.
Would people _please_ stop picking on Joerg.
It should be quite obvious that if
a) people don't read documentation, or
b)
most likely means that your media is poorly supported by your firmware.
Then 3/11/05 L-EC UNCORRECTABLE ERROR doesn't make much sense
either... What media is it anyway (see dvd+rw-mediainfo output for Media
ID)? Poor media support manifests itself in most bizarre ways. There
were reports that
Can one criticize dvd+rw-tools for so to say sweeping the bug under the
carpet, which might have indirectly complicated life for other
applications and their developers? Well, one could *if* it was done
silently. But it wasn't. Thorough problem analysis was presented to the
public on a FreeBSD
From: Andy Polyakov [EMAIL PROTECTED]
If you did know about the bug before I did, I may well critisize you:
Why didn't you send a bug report
I'm ready to accept criticism as soon as somebody can point out what was
it in the referred post, which discredits it as as a bug report? Note
that
Ok. The media I bought are as follow:
- TDK DVD-RW single-sided Data/Video 4.7GB 1-2x;
- TDK DVD-R single-sided Data/Video 4.7GB 1-4x.
Is there anything wrong whith these types of media? Advices?
The medium quality should be OK. So it should become usable by cdrecord
after you did run
From [EMAIL PROTECTED] Sun Apr 11 18:08:09 2004
Can one criticize dvd+rw-tools for so to say sweeping the bug under the
carpet, which might have indirectly complicated life for other
applications and their developers? Well, one could *if* it was done
silently. But it wasn't. Thorough problem
From: Julien Gabel [EMAIL PROTECTED]
Ok. The media I bought are as follow:
- TDK DVD-RW single-sided Data/Video 4.7GB 1-2x;
- TDK DVD-R single-sided Data/Video 4.7GB 1-4x.
Is there anything wrong whith these types of media? Advices?
The medium quality should be OK. So it should become
From: Geoffrey [EMAIL PROTECTED]
Your message is not helpful at all! Why did you send it?
Because you are harsh to everyone, whether they are new to the list, old
to the list, have any expertise or none. The purpose of my posting was
to urge the poster to continue to pursue his problems,
Joerg Schilling wrote:
From: Geoffrey [EMAIL PROTECTED]
Your message is not helpful at all! Why did you send it?
Because you are harsh to everyone, whether they are new to the list, old
to the list, have any expertise or none. The purpose of my posting was
to urge the poster to continue to
On Tue, Apr 13, 2004 at 01:24:51PM -0400, Geoffrey wrote:
That being said, I'll not take up any more of your precious time with
further responses to this thread.
Would people _please_ stop picking on Joerg.
It should be quite obvious that if
a) people don't read documentation, or
b)
most likely means that your media is poorly supported by your firmware.
Then 3/11/05 L-EC UNCORRECTABLE ERROR doesn't make much sense
either... What media is it anyway (see dvd+rw-mediainfo output for Media
ID)? Poor media support manifests itself in most bizarre ways. There
were reports that
Can one criticize dvd+rw-tools for so to say sweeping the bug under the
carpet, which might have indirectly complicated life for other
applications and their developers? Well, one could *if* it was done
silently. But it wasn't. Thorough problem analysis was presented to the
public on a FreeBSD
Ok. The media I bought are as follow:
- TDK DVD-RW single-sided Data/Video 4.7GB 1-2x;
- TDK DVD-R single-sided Data/Video 4.7GB 1-4x.
Is there anything wrong whith these types of media? Advices?
The medium quality should be OK. So it should become usable by cdrecord
after you did run
Hello,
I am using a TEAC DV-W22E R.0A on my notebook, which is a all in one
CD-R/RW and DVD-R/RW player and writer. My main OS is FreeBSD 5.2.1
(RELEASE-p4) and I already succeed in:
- write CD-R (cdrecord);
- write/rewrite CD-RW (cdrecord);
- write a DVD-R (growisofs).
But it seems
From: Julien Gabel [EMAIL PROTECTED]
I am using a TEAC DV-W22E R.0A on my notebook, which is a all in one
CD-R/RW and DVD-R/RW player and writer. My main OS is FreeBSD 5.2.1
(RELEASE-p4) and I already succeed in:
- write CD-R (cdrecord);
- write/rewrite CD-RW (cdrecord);
- write a DVD-R
I am using a TEAC DV-W22E R.0A on my notebook, which is a all in one
CD-R/RW and DVD-R/RW player and writer. My main OS is FreeBSD 5.2.1
(RELEASE-p4) and I already succeed in:
- write CD-R (cdrecord);
- write/rewrite CD-RW (cdrecord);
- write a DVD-R (growisofs).
But it seems _not_possible_
From: Julien Gabel [EMAIL PROTECTED]
It does not seem that you really used cdrecord-ProDVD!
If you don't use it and give error messages, it is hard to help
Ok, sorry for the _bad_ information. Here is what I get if I try to use
cdrecord-ProDVD (obtained from
If you ever did format it, you _need_ to run cdrecord blank=full
to make it usable again.
I get the following error trying to blank the DVD-RW media:
You areusing a defektive kernel!
Your kernel does not implement ATAPI CAP auto sense which is required.
Upgrade to a fixed kernel
Ouch! If
V ne, 11. 04. 2004 v 13:47, Joerg Schilling pe:
If you need information about FreeBSD kernel bugs, ask the
FreeBSD kernel team!
You definitely need to replace your kernel with a working one!
There was a deficiency in kernel that it does not provided sense codes
automatically, as required by
If you need information about FreeBSD kernel bugs, ask the
FreeBSD kernel team!
You definitely need to replace your kernel with a working one!
Ok, I understand that you are *not* responsible for the FreeBSD part,
but since you said it is a FreeBSD kernel bug and since you provide a
binary
Julien Gabel wrote:
If you need information about FreeBSD kernel bugs, ask the
FreeBSD kernel team!
You definitely need to replace your kernel with a working one!
Ok, I understand that you are *not* responsible for the FreeBSD part,
but since you said it is a FreeBSD kernel bug and since you
From: Geoffrey [EMAIL PROTECTED]
If you're new to the list, you'll find that Joerg is quite vocal
regarding OS's that are not his favorite... Unfortunately, inspite of
I don't have favorite OS, but I don't like kernel teams that piss at you
which is only the case for Linux!
FreeBSD
If you're new to the list, you'll find that Joerg is quite vocal
regarding OS's that are not his favorite... Unfortunately, inspite of
I don't have favorite OS, but I don't like kernel teams that piss at you
which is only the case for Linux!
FreeBSD developers usually take care about
TEAC DV-W22E R.0A
But it seems _not_possible_ to write (or rewrite or blank etc.) a DVD-RW.
dvd+rw-tools-5.19.4.9.7
1/ For example, when I try to blank a DVD-RW in sequential mode, I get:
# dvd+rw-format -blank=full /dev/cd0
* DVD±RW format utility by [EMAIL PROTECTED], version 4.9.
:-(
dvd+rw-tools were teached to obtain sense information from kernel
manually, so they fully work on 5.2.1. cdrecord relies on working
autosense and thus don't work on 5.2.1.
I would call this behavior of dvd+rw-tools a bug as the CAM standard
requires auto-sense to work. If FreeBSD is fixed, the
Joerg Schilling wrote:
Your message is not helpful at all! Why did you send it?
Because you are harsh to everyone, whether they are new to the list, old
to the list, have any expertise or none. The purpose of my posting was
to urge the poster to continue to pursue his problems, inspite of the
Hello,
I am using a TEAC DV-W22E R.0A on my notebook, which is a all in one
CD-R/RW and DVD-R/RW player and writer. My main OS is FreeBSD 5.2.1
(RELEASE-p4) and I already succeed in:
- write CD-R (cdrecord);
- write/rewrite CD-RW (cdrecord);
- write a DVD-R (growisofs).
But it seems
From: Julien Gabel [EMAIL PROTECTED]
I am using a TEAC DV-W22E R.0A on my notebook, which is a all in one
CD-R/RW and DVD-R/RW player and writer. My main OS is FreeBSD 5.2.1
(RELEASE-p4) and I already succeed in:
- write CD-R (cdrecord);
- write/rewrite CD-RW (cdrecord);
- write a DVD-R
I am using a TEAC DV-W22E R.0A on my notebook, which is a all in one
CD-R/RW and DVD-R/RW player and writer. My main OS is FreeBSD 5.2.1
(RELEASE-p4) and I already succeed in:
- write CD-R (cdrecord);
- write/rewrite CD-RW (cdrecord);
- write a DVD-R (growisofs).
But it seems _not_possible_
From: Julien Gabel [EMAIL PROTECTED]
It does not seem that you really used cdrecord-ProDVD!
If you don't use it and give error messages, it is hard to help
Ok, sorry for the _bad_ information. Here is what I get if I try to use
cdrecord-ProDVD (obtained from
If you ever did format it, you _need_ to run cdrecord blank=full
to make it usable again.
I get the following error trying to blank the DVD-RW media:
You areusing a defektive kernel!
Your kernel does not implement ATAPI CAP auto sense which is required.
Upgrade to a fixed kernel
Ouch! If
If you need information about FreeBSD kernel bugs, ask the
FreeBSD kernel team!
You definitely need to replace your kernel with a working one!
Jörg
--
EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin
[EMAIL PROTECTED](uni) If you don't have iso-8859-1
V ne, 11. 04. 2004 v 13:47, Joerg Schilling pe:
If you need information about FreeBSD kernel bugs, ask the
FreeBSD kernel team!
You definitely need to replace your kernel with a working one!
There was a deficiency in kernel that it does not provided sense codes
automatically, as required by
If you need information about FreeBSD kernel bugs, ask the
FreeBSD kernel team!
You definitely need to replace your kernel with a working one!
Ok, I understand that you are *not* responsible for the FreeBSD part,
but since you said it is a FreeBSD kernel bug and since you provide a
binary
From: Pav Lucistnik [EMAIL PROTECTED]
If you need information about FreeBSD kernel bugs, ask the
FreeBSD kernel team!
=20
You definitely need to replace your kernel with a working one!
There was a deficiency in kernel that it does not provided sense codes
automatically, as required by
Julien Gabel wrote:
If you need information about FreeBSD kernel bugs, ask the
FreeBSD kernel team!
You definitely need to replace your kernel with a working one!
Ok, I understand that you are *not* responsible for the FreeBSD part,
but since you said it is a FreeBSD kernel bug and since you
From: Geoffrey [EMAIL PROTECTED]
If you're new to the list, you'll find that Joerg is quite vocal
regarding OS's that are not his favorite... Unfortunately, inspite of
I don't have favorite OS, but I don't like kernel teams that piss at you
which is only the case for Linux!
FreeBSD
If you're new to the list, you'll find that Joerg is quite vocal
regarding OS's that are not his favorite... Unfortunately, inspite of
I don't have favorite OS, but I don't like kernel teams that piss at you
which is only the case for Linux!
FreeBSD developers usually take care about
TEAC DV-W22E R.0A
But it seems _not_possible_ to write (or rewrite or blank etc.) a DVD-RW.
dvd+rw-tools-5.19.4.9.7
1/ For example, when I try to blank a DVD-RW in sequential mode, I get:
# dvd+rw-format -blank=full /dev/cd0
* DVD±RW format utility by [EMAIL PROTECTED], version 4.9.
:-( failed
dvd+rw-tools were teached to obtain sense information from kernel
manually, so they fully work on 5.2.1. cdrecord relies on working
autosense and thus don't work on 5.2.1.
I would call this behavior of dvd+rw-tools a bug as the CAM standard
requires auto-sense to work. If FreeBSD is fixed, the
Because the three software I try seems not working, I tend to think that
this particular writer is not (yet?) supported.
Is there something I can do in order to make it working?
The fact that you see failed to locate Quick format descriptor alone
most likely means that your media is poorly
Joerg Schilling wrote:
Your message is not helpful at all! Why did you send it?
Because you are harsh to everyone, whether they are new to the list, old
to the list, have any expertise or none. The purpose of my posting was
to urge the poster to continue to pursue his problems, inspite of the
46 matches
Mail list logo