On Tue, May 15, 2012 at 1:27 PM, Florian La Roche
florian.laro...@gmx.net wrote:
On Tue, May 15, 2012 at 07:52:05AM -0700, Akemi Yagi wrote:
On Tue, May 15, 2012 at 7:41 AM, Florian La Roche
florian.laro...@gmx.net wrote:
I also tend to favour shutdown/reboots for kvm guests instead
On Tue, May 15, 2012 at 8:14 AM, Stephen Harris li...@spuddy.org wrote:
On Tue, May 15, 2012 at 07:52:05AM -0700, Akemi Yagi wrote:
http://bugs.centos.org/view.php?id=5726
I think it has to do with shutdown/reboots versus suspend/resume.
FWIW, I hit this last week; had shut down the host
On Sat, May 12, 2012 at 8:39 AM, Gregory P. Ennis po...@pomec.net wrote:
It is interesting in that the nic interface on the mother board is
listed as :
Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit
The nic interface on the mother board works fine. Based on this I would
On Tue, May 8, 2012 at 8:09 AM, Rogelio scubac...@gmail.com wrote:
What is the best way to upgrade to Python 2.6 from the default Python 2.4.
I'm running CentOS 5 -- Linux mybox.domain.com 2.6.18-238.9.1.el5 #1
SMP Tue Apr 12 18:10:13 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
I've read these
On Sat, May 5, 2012 at 11:22 AM, Steve Clark scl...@netwolves.com wrote:
Alan Akemi,
Would it be possible to get CONFIG_ARPD turned on in the
centosplus 6.x kernel? It is required to use opennhrp.
See the link below where is was decided to turn it on in Fedora.
On Sat, May 5, 2012 at 12:40 PM, Steve Clark scl...@netwolves.com wrote:
http://bugs.centos.org/view.php?id=5709
I actually took the latest centosplus kernel srpm and got it going in my
environment (would like to have
semi official support though ;-) ). It has been running stable for a
On Mon, Apr 30, 2012 at 10:15 AM, Daniel J Walsh dwa...@redhat.com wrote:
These are caused because you disabled IPV6.
http://danwalsh.livejournal.com/47118.html
That note about HowTo disable IPV6 is in the CentOS FAQ:
On Mon, Apr 23, 2012 at 11:14 AM, Lamar Owen lo...@pari.edu wrote:
Additional information, from the F14 FSL i686 command line:
+
09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast
Ethernet PCI Express (rev 02)
Kernel driver in use: tg3
Kernel
On Mon, Apr 23, 2012 at 12:40 PM, aurfalien aurfal...@gmail.com wrote:
So after I do yum install kmod-nvidia and rebooting, I get no screen.
My errors;
/var/log/messages;
kernel: NVRM: The NVIDIA GeForce4 MX 4000 GPU installed in this system is
kernel: NVRM: supported through the NVIDIA
On Sat, Apr 14, 2012 at 4:33 AM, Christoph Galuschka
christoph.galusc...@chello.at wrote:
hello,
do you think this is worth adding to
http://wiki.centos.org/HowTos/FreeNX?action=show ?
An issue with freenx and vsphere5:
On Sat, Apr 14, 2012 at 3:47 PM, Christopher Meng cicku...@gmail.com wrote:
Well, I would but alas no write access :(
haha,you can request.
He did and has already edited the page. :-)
Akemi
___
CentOS-docs mailing list
CentOS-docs@centos.org
On Fri, Apr 13, 2012 at 12:53 PM, Rob Kampen rkam...@kampensonline.com wrote:
On 04/14/2012 04:26 AM, Brian McGrew wrote:
Dell has once again obsoleted out hardware and we're moving forward to the
Optiplex 790 as a shipping platform with the integrated Intel graphics chip.
We're using
On Wed, Apr 4, 2012 at 9:51 AM, Stephen Harris li...@spuddy.org wrote:
I know, I know... don't use the non-standard kernels unless you have to...
BUT: I have a D-Link N150 USB card.
(snip)
Has anyone else tried to get 3.2.9 to work with C5.8?
Alan Bartlett of ELRepo built a 3.0.x kernel for
On Wed, Apr 4, 2012 at 10:11 AM, Stephen Harris li...@spuddy.org wrote:
On Wed, Apr 04, 2012 at 10:07:38AM -0700, Carlos Daniel Ruvalcaba Valenzuela
wrote:
Also the problem with compiling a new kernel is that the vanilla
configuration may not work for you and configuring kernel options can
On Wed, Apr 4, 2012 at 9:51 AM, Stephen Harris li...@spuddy.org wrote:
I know, I know... don't use the non-standard kernels unless you have to...
BUT: I have a D-Link N150 USB card.
Bus 001 Device 004: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150
[Atheros AR9271]
OK, we are back here.
On Wed, Apr 4, 2012 at 11:11 AM, Stephen Harris li...@spuddy.org wrote:
On Wed, Apr 04, 2012 at 11:06:04AM -0700, Akemi Yagi wrote:
kmod-compat-wireless. Details are here:
http://elrepoproject.blogspot.com/2012/03/one-size-fits-all-compat-wireless-fits.html
So, give it a try. :)
Yeah, I'd
On Tue, Mar 27, 2012 at 2:48 AM, admin lewis adminle...@gmail.com wrote:
2012/3/27 Johnny Hughes joh...@centos.org:
On 03/26/2012 04:45 PM, admin lewis wrote:
Anyone know if there is a kernel autoconfigure tool to compile from source ?
thanks
luigi
What are you trying to accomplish.
On Fri, Mar 23, 2012 at 2:16 PM, Marko Vojinovic vvma...@gmail.com wrote:
Hi everyone! :-)
I have a problem with making a wireless USB dongle work under CentOS 6. The
dongle is known to not work natively under Linux and last time I used it (cca
3 years ago) I managed to get it working using
On Fri, Mar 23, 2012 at 2:33 PM, Akemi Yagi amy...@gmail.com wrote:
On Fri, Mar 23, 2012 at 2:16 PM, Marko Vojinovic vvma...@gmail.com wrote:
This time I was hoping to make it work again in the same way. But the yum
install kmod-ndiswrapper reports the following (among other regular stuff
On Fri, Mar 23, 2012 at 3:28 PM, Marko Vojinovic vvma...@gmail.com wrote:
On Friday, 23. March 2012. 21.36.54 Ned Slider wrote:
I see. Well, I just tried to install it, and it fails again, this time with a
similar but different error:
# yum --enablerepo=elrepo-testing install
On Fri, Mar 2, 2012 at 8:52 AM, R P Herrold herr...@owlriver.com wrote:
I've updated:
http://wiki.centos.org/HowTos/EOLC3
which, of course no longer applies to just one major release
I am unfamiliar with the process of pushing through a rename
of a page, but I see copies of change
On Mon, Feb 27, 2012 at 7:34 PM, Tom Bishop bisho...@gmail.com wrote:
Finally got a chance to install Centos 6.x x86_64 version and having an
issue with the latest version of freenx. This is a desktop install on a
esxi 5 with all updates and only thing I have installed is the latest
vmware
On Thu, Feb 16, 2012 at 12:34 PM, fred smith
fre...@fcshome.stoneham.ma.us wrote:
On Thu, Feb 16, 2012 at 09:15:18AM -0600, Johnny Hughes wrote:
I used to use the NVIDIA drivers directly from the nvidia.com, but since
I upgraded my workstation to CentOS-6.x I have been using elrepo's rpms
for
On Tue, Feb 7, 2012 at 12:17 PM, cent...@iotti.biz wrote:
Hi all,
I'm looking for latest centosplus kernel source rpm , which should be
kernel-2.6.32-220.4.1.el6.centos.plus.src.rpm to date.
Maybe someone could provide a link to it?
I'm afraid it's been forgotten. :( I was told it would be
On Tue, Jan 24, 2012 at 7:23 AM, kasi viswanath kash...@yahoo.com wrote:
Hi,
I'm using the procedure described in building customer kenrels centOS5.0.
Except for one step where spec file to comment 25 lines from 638, I did every
thing.
I assume you are referring to:
On Sun, Jan 22, 2012 at 5:08 AM, Riccardo Veraldi
riccardo.vera...@cnaf.infn.it wrote:
Hello,
is anyone experiencing this ?
I have a sympa process (bulk.pl) which triggers this bug:
[ cut here ]
WARNING: at kernel/sched.c:5914 thread_return+0x232/0x79d() (Not tainted)
On Tue, Jan 17, 2012 at 8:09 AM, Jerry Amundson jamun...@gmail.com wrote:
On Tue, Jan 17, 2012 at 9:57 AM, Akemi Yagi amy...@gmail.com wrote:
On Tue, Jan 17, 2012 at 7:33 AM, Jerry Amundson jamun...@gmail.com
wrote:
Can someone add CentOS
6: http://dev.centos.org/centos/6/testing/CentOS
On Mon, Jan 16, 2012 at 7:58 AM, Mark LaPierre marklap...@aol.com wrote:
I did this:
[root@mushroom yum.repos.d]# /etc/yum.repos.d
[root@mushroom yum.repos.d]# rm -f elrepo.repo
[root@mushroom yum.repos.d]# yum clean all
[root@mushroom yum.repos.d]# rpm -Uvh
On Sun, Jan 15, 2012 at 9:06 PM, Mark LaPierre marklap...@aol.com wrote:
I did this:
[root@mushroom yum.repos.d]# rpm --import
http://elrepo.org/RPM-GPG-KEY-elrepo.org
[root@mushroom yum.repos.d]# rpm -Uvh
http://elrepo.org/elrepo-release-5-3.el5.elrepo.noarch.rpm
Retrieving
On Sun, Jan 1, 2012 at 10:49 PM, Mark LaPierre marklap...@aol.com wrote:
I just installed CentOS 6.2 32 bit today. When I try to start the
Virtual Machine Manager I get a error:
Packages required for KVM usage
The following packages are not installed:
qemu-kvm
KVM is not available for
2011/12/22 YoungHoon Park bulmoji-cen...@yahoo.com:
Hello Ralph.
I clicked Release Notes link on www.centos.org.
It took me to the Release Notes 6.2 page below.
http://wiki.centos.org/Manuals/ReleaseNotes/CentOS6.2
Still, I cannot see any edit menu differently other previous release notes
On Thu, Dec 22, 2011 at 8:26 AM, Paul Heinlein heinl...@madboa.com wrote:
What worked for me was running virsh edit against each (now
shutdown) domain, removing all the address tags in the devices
section, e.g.,
devices
disk
address type='pci' .../
/disk
interface
On Tue, Dec 20, 2011 at 11:38 PM, lee_yiu_ch...@yahoo.com
lee_yiu_ch...@yahoo.com wrote:
In CentOS/6.2/os/x86_64/Packages (x86_64 main), there are those packages
available:
jasper-libs-1.900.1-15.el6.i686.rpm
jasper-libs-1.900.1-15.el6.x86_64.rpm
krb5-libs-1.9-22.el6.i686.rpm
On Wed, Dec 21, 2011 at 10:53 AM, John R Pierce pie...@hogranch.com wrote:
On 12/21/11 9:00 AM, centos-announce-requ...@centos.org wrote:
Today's Topics:
1. Release for CentOS-6.2 i386 and x86_64 (Karanbir Singh)
odd. I subscribe to CentOS-Announce, yet I never got this message. I
On Wed, Dec 21, 2011 at 2:07 PM, Dennis Jacobfeuerborn
denni...@conversis.de wrote:
On Centos 5.6 this works as expected. On Centos 5.7 this also works but
also outputs RTNETLINK answers: No such device.
It seems the script is not broken but the code path executed is now very
different (due
On Fri, Dec 9, 2011 at 10:52 AM, Georgi Meyer georgi_me...@nols.edu wrote:
HI All,
I am new to Linux so please bare with me.
I am running Centos 5.7 with FreeNX-0.7.3-8.el5 and I have successfully
installed everything and configured my first user. However when I log in
using the NX Client I
On Wed, Dec 7, 2011 at 1:08 AM, John Hodrien j.h.hodr...@leeds.ac.uk wrote:
On Mon, 5 Dec 2011, Lamar Owen wrote:
On Monday, December 05, 2011 11:11:45 AM Akemi Yagi wrote:
FYI, the ELRepo project now provides kernel-ml for EL6 [1] that
includes a non-PAE kernel [2] (thanks to Alan Bartlett
On Wed, Dec 7, 2011 at 1:03 AM, John Hodrien j.h.hodr...@leeds.ac.uk wrote:
On Tue, 6 Dec 2011, Karanbir Singh wrote:
On 12/05/2011 07:00 PM, m.r...@5-cent.us wrote:
I thought CentOS6 didn't come with a non-PAE kernel, more specifically,
the standard 32bit kernel requires PAE even if it
On Mon, Dec 5, 2011 at 8:03 AM, Dennis Jacobfeuerborn
denni...@conversis.de wrote:
On 12/05/2011 04:52 PM, Beartooth wrote:
I don't even know how to tell what kernel a prospective download
has. I do know that some of my other PCs list kernels with and without
PAE in the grub display.
On Mon, Nov 28, 2011 at 11:19 AM, James B. Byrne byrn...@harte-lyne.ca wrote:
Is this available for CentOS and if so then where is this
package located? Yum cannot find it in the configured
repositories and I can seemingly only locate the
Scientific Linux version through Google.
I suggest
On Mon, Nov 28, 2011 at 1:45 PM, Steve Thompson s...@vgersoft.com wrote:
CentOS 5.7 x86_64. Lots of hosts NFS mounting a file system. All are
configured identically (same LDAP servers, same DNS, same autofs config,
same patches, etc). On some of them I see an NFS mount displaying a host
name:
On Mon, Nov 28, 2011 at 10:38 AM, Emmett Culley emm...@webengineer.com wrote:
I finally decided to install the CR repo on one of my CentOS 6 machines that
I use as a host for some VMs (also running CentOS 6).
Before updating the host I updated a VM that was not critical to test the
process
On Mon, Nov 28, 2011 at 3:25 PM, Frank Cox thea...@sasktel.net wrote:
On Mon, 28 Nov 2011 14:33:42 -0800
Akemi Yagi wrote:
Yes. The version of autofs must be different. It's a known issue and
has been resolved in later versions of autofs. Please see:
https://bugzilla.redhat.com/show_bug.cgi
On Fri, Nov 25, 2011 at 11:49 AM, Karanbir Singh mail-li...@karan.org wrote:
On 11/25/2011 07:35 PM, Antonio da Silva Martins Junior wrote:
I'm looking into the RPMs changelog for the 6.0CR kernel, and didn't
find mention of receive packet steering (RPS) and receive flow steering
(RFS).
On Tue, Nov 15, 2011 at 12:56 PM, Denniston, Todd A CIV
NAVSURFWARCENDIV Crane todd.dennis...@navy.mil wrote:
I have been seeing something for quite some time which has confused me
considerably for over a year, perhaps one of you can help me understand.
Assumed: rpm queries are against _a_
On Wed, Nov 16, 2011 at 6:56 AM, John Hodrien j.h.hodr...@leeds.ac.uk wrote:
On Wed, 16 Nov 2011, Akemi Yagi wrote:
What you are seeing is indeed odd. I see 'version 3.1' but not '3.2'
anywhere on the Summary line of bash. What is your kernel by the way?
uname -mr ?
Have you cleared yum
On Mon, Nov 14, 2011 at 4:39 AM, Phil Savoie psavoie1...@rogers.com wrote:
Hi All,
Using the following to ssh into my home to get mail, I suddenly get this:
ssh -o TCPKeepAlive=yes -o ServerAliveInterval=240 -L
110:192.168.100.108:110 phil@FQDN
phil@FQDN's password:
bind: Cannot assign
On Mon, Nov 14, 2011 at 5:57 PM, Alan McKay alan.mc...@gmail.com wrote:
Basically from what I gather, while Red Hat cannot restrict access to
sources, they can restrict access to binaries. And since CentOS has a
goal of binary compatibility with upstream, they are essentially left
trying to
On Tue, Nov 1, 2011 at 3:02 AM, Peter Peltonen peter.pelto...@gmail.com wrote:
Hi,
On Tue, Nov 1, 2011 at 10:13 AM, Mathieu Baudier mbaud...@argeo.org wrote:
If absolute 100% binary compatibility is not required, but admin-level
compatibility and source-level compatibility with upstream EL
On Tue, Nov 1, 2011 at 8:58 AM, Ljubomir Ljubojevic off...@plnet.rs wrote:
Vreme: 11/01/2011 04:50 PM, Digimer piše:
On 11/01/2011 01:46 AM, Bob Hoffman wrote:
I have been reading the threads on here with great ernest about redhat
making a move to throw off centos compilations.
Having spoken
On Mon, Oct 10, 2011 at 10:12 PM, James A. Peltier jpelt...@sfu.ca wrote:
- Original Message -
| On 10/10/11 9:39 PM, James A. Peltier wrote:
| It looks like I am also having trouble with rsh on C6 ...
| rsh was deprecated 10+ years ago, along with all the other r things...
| they
On Tue, Oct 11, 2011 at 9:12 AM, James A. Peltier jpelt...@sfu.ca wrote:
Did you install just @core? I have done @core as described earlier with rsh
and rsh-server and it just hangs so I'm missing something. On the
workstation install it works using the exact same setup so I think I'm
On Thu, Sep 29, 2011 at 11:54 AM, James B. Byrne byrn...@harte-lyne.ca wrote:
Is there anything special in the way of configuration that
is required to enable a CentOS box to act as the point of
origin for an http request routed to it via a SOCKS ssh
link?
I have researched this matter and
On Tue, Sep 20, 2011 at 8:18 AM, Mogens Kjaer m...@lemo.dk wrote:
On 09/20/2011 04:40 PM, John Doe wrote:
So apparently no libXm.so.4 in base, repoforge or elrepo...
There's a 32 bit version of openmotif in CentOS 5.7 x86_64.
Right, as Nicolas pointed out in his post, openmotif 32-bit is
On Thu, Sep 1, 2011 at 2:05 PM, Jerry Geis ge...@pagestation.com wrote:
I'm not all that excited about using another repo.
(snip)
I extracted the source for 2.6.32.46 and found the fs/hfsplus directory.
The above files are present. I changed the makefile to the above.
All the files compile -
On Thu, Sep 1, 2011 at 1:05 PM, Lee Perez leeca...@windstream.net wrote:
Afternoon All,
Just ran yum update and it burped on the following:
Package xulrunner.i386 0:1.9.2.20-3.el5_7 set to be updated
-- Processing Conflict: firefox conflicts xulrunner = 1.9.2.19
On Sun, Aug 28, 2011 at 6:01 AM, Karanbir Singh mail-li...@karan.org wrote:
On 08/26/2011 09:01 AM, Rudi Ahlers wrote:
The CentOS forum is pretty useless IMO
The CentOS Forums are a very very good resource for many people and the
people spending time managing and posting there are doing a
On Tue, Aug 2, 2011 at 12:54 PM, Akemi Yagi amy...@gmail.com wrote:
On Tue, Aug 2, 2011 at 8:34 AM, Akemi Yagi amy...@gmail.com wrote:
On Tue, Aug 2, 2011 at 6:34 AM, Daniel J Walsh dwa...@redhat.com wrote:
I have updated that web site. What is the path of the .ssh directory
that is giving
On Tue, Aug 23, 2011 at 1:31 PM, Akemi Yagi amy...@gmail.com wrote:
On Thu, Aug 11, 2011 at 2:17 PM, Matti Aarnio matti.aar...@methics.fi
wrote:
Hi,
Could CentOS kernel keepers apply following patch on current kernel?
http://patchwork.ozlabs.org/patch/95785/
(snip)
Could
On Sun, Aug 14, 2011 at 8:39 AM, Akemi Yagi amy...@gmail.com wrote:
On Thu, Aug 11, 2011 at 2:30 PM, Akemi Yagi amy...@gmail.com wrote:
On Thu, Aug 11, 2011 at 2:17 PM, Matti Aarnio matti.aar...@methics.fi
wrote:
Hi,
Could CentOS kernel keepers apply following patch on current kernel
On Thu, Aug 11, 2011 at 2:30 PM, Akemi Yagi amy...@gmail.com wrote:
On Thu, Aug 11, 2011 at 2:17 PM, Matti Aarnio matti.aar...@methics.fi wrote:
Hi,
Could CentOS kernel keepers apply following patch on current kernel?
http://patchwork.ozlabs.org/patch/95785/
(snip)
Could
On Thu, Aug 11, 2011 at 2:17 PM, Matti Aarnio matti.aar...@methics.fi wrote:
Hi,
Could CentOS kernel keepers apply following patch on current kernel?
http://patchwork.ozlabs.org/patch/95785/
(snip)
Could this be applied on stock CentOS kernel so that I could return on
un-customized
On Thu, Aug 11, 2011 at 2:38 PM, Morten Stevens
mstev...@imt-systems.com wrote:
On Fri, 12 Aug 2011 00:17:02 +0300, Matti Aarnio wrote:
The issue is a bug in vmxnet3 driver, which is not able to disable
LRO mode when the kernel is telling the driver to do so.
The patch for it applies on
2011/8/5 Peter Kjellström c...@nsc.liu.se:
Our X520 are still stable except for one recent problem, 2.6.18-238.9.1 -
2.6.18-238.12.1 broke it quite bad. With 238.12.1 our servers start dropping
all incomming packets after a while. Sanity can be (temporarily restored with
a ethtool --negotiate
On Tue, Aug 2, 2011 at 4:26 AM, Helmut Drodofsky
drodof...@internet-xs.de wrote:
Hi,
http://wiki.centos.org/HowTos/FreeNX
says: NX and FreeNX are only available for Centos 4 and 5
Alternative?
nx/freenx for CentOS-6 is under development. You can follow the status here:
On Tue, Aug 2, 2011 at 6:34 AM, Daniel J Walsh dwa...@redhat.com wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 08/02/2011 08:18 AM, Scott Robbins wrote:
On Tue, Aug 02, 2011 at 04:53:37AM -0700, Akemi Yagi wrote:
The current testing version can be found here:
http
On Tue, Aug 2, 2011 at 8:47 AM, Helmut Drodofsky
drodof...@internet-xs.de wrote:
The rpms from ATrpms.net have not installed correct. E.g. I'm missing the
entries for /etc/init.d/freenx-server or something like that.
The stuff at atrpms is not being maintained, and if I remember, the nx
On Tue, Aug 2, 2011 at 8:34 AM, Akemi Yagi amy...@gmail.com wrote:
On Tue, Aug 2, 2011 at 6:34 AM, Daniel J Walsh dwa...@redhat.com wrote:
I have updated that web site. What is the path of the .ssh directory
that is giving you a problem? Does running restorecon on the directory
solve
On Tue, Jul 26, 2011 at 8:36 AM, Mark mhullr...@gmail.com wrote:
When I created a CentOS VM (using VMWare WorkStation), I installed
with the first DVD, and the disk partitioning and installation was all
done automatically with almost no input required from me.
The problem with this is that
On Tue, Jul 26, 2011 at 9:01 AM, Les Mikesell lesmikes...@gmail.com wrote:
On 7/26/2011 10:46 AM, Akemi Yagi wrote:
I have reported the problem to VMware:
http://communities.vmware.com/thread/309617
Is this an artifact of offsetting the start of a partition for block
alignment after
On Thu, Jul 21, 2011 at 2:19 PM, Tom H tomh0...@gmail.com wrote:
On Thu, Jul 21, 2011 at 4:29 PM, m.r...@5-cent.us wrote:
In later Fedora releases, GDM has become less and less functional:
configurability has been removed, more so as releases occur. From my
(known to be flaky) memory, that
, and if not, some public mirror will arise.
If you want me to change this directly, my login is JohnFettig. I
would be happy if e.g. Akemi Yagi (amy...@gmail.com) would add this
info.
Ralph is the Wiki admin. He can give you edit right for that page.
Akemi
On Tue, Jul 19, 2011 at 11:42 AM, Markus Falb markus.f...@fasel.at wrote:
Announcement made but the updates are still missing. I just had a look
on mirror.centos.org and I could not find it.
From a Forum post this morning:
On Mon, Jul 18, 2011 at 7:10 AM, Baptiste AGASSE
baptiste.aga...@lyra-network.com wrote:
Hi all,
I've a little problem with CentOS 6 and EFI on Dell Poweredge R510...
My Logical disk (hardware raid) is a little bit greated than 9TB, so i must
use EFI in order to see the whole disk space and
On Mon, Jul 18, 2011 at 4:53 PM, Scott Robbins scot...@nyc.rr.com wrote:
On Monday, July 18, 2011 01:52 AM, Michel Donais wrote:
The version is CentOS-6.0-i386-bin-DVD.iso
With each virtual machine I get this result at the beginning of the
installation:
This kernel requires the
On Fri, Jul 15, 2011 at 2:07 PM, Trey Dockendorf treyd...@gmail.com wrote:
I have decided to migrate my latest KVM server to CentOS 6.0 and am
beginning to get a little frustrated with some issues that worked perfectly
in 5.6.
(snip)
Here's what I have so far...
ifcfg-eth3...
On Wed, Jul 13, 2011 at 10:42 AM, Les Mikesell lesmikes...@gmail.com wrote:
On 7/13/2011 12:31 PM, Ljubomir Ljubojevic wrote:
Possible approach would be NX (Nomachine) or FreeNX client/server.
Connection is via SHH but you get full GUI Access and sound and (local?)
printer.
NX server is
On Wed, Jul 13, 2011 at 12:34 PM, Ljubomir Ljubojevic off...@plnet.rs wrote:
Ljubomir Ljubojevic wrote:
Frank Cox wrote:
On Tue, 12 Jul 2011 09:36:08 +0200
Ljubomir Ljubojevic wrote:
Gnome System Monitor used to crash on RHEL Beta. Have you ran update as
soon as you installed? It is most
On Tue, Jul 12, 2011 at 2:31 AM, Eric Viseur eric.vis...@gmail.com wrote:
CentOS has the complete RHEL binary compatibility, which SL doesn't always
have. Can be a decisive thing, sometimes.
Just to be more precise ... No clones (including CentOS) have
*complete* RHEL binary compatibility.
On Tue, Jul 12, 2011 at 1:29 PM, Jerry Geis ge...@pagestation.com wrote:
Hi all,
Was installing centos 6 and found this:
./CentOS-5.6-x86_64/CentOS/gtk+-1.2.10-56.el5.i386.rpm
./CentOS-5.6-x86_64/CentOS/gtk+-devel-1.2.10-56.el5.i386.rpm
On Wed, Jun 22, 2011 at 8:33 AM, Ricardo David Carrillo Sanchez
dominus@gmail.com wrote:
Hi,
Could you send the link to see the Release Notes ..? or wiki section
Here:
http://wiki.centos.org/Manuals/ReleaseNotes/CentOS6.0
___
CentOS-docs mailing
On Wed, Jun 8, 2011 at 6:59 PM, liming wu wuliming2...@gmail.com wrote:
what's the output of lsusb?
Here is the output :
[root@wulmcent ~]# lsusb
Bus 001 Device 001: ID :
Bus 001 Device 002: ID 0cf3:1006
On Wed, Jun 1, 2011 at 4:56 PM, Tru Huynh t...@centos.org wrote:
the centosplus postfix is being built now, will be released asap
Next time, use bugs.centos.org for reminding us to fix it too ;)
So, perhaps this one will help?
http://bugs.centos.org/view.php?id=4866
Filed about 3 weeks ago
On Thu, May 19, 2011 at 5:36 PM, Mike Karasoff mkaras...@rgb.com wrote:
Thanks Ralph.
When I log into the Wiki and go to
http://wiki.centos.org/MikeKarasoff/?action=edit I get: You are not allowed
to edit this page. Am I doing something wrong here? My login name is
Michael Karasoff.
On Thu, May 12, 2011 at 8:55 AM, Ljubomir Ljubojevic off...@plnet.rs wrote:
• 2011-01-13: Distribution Release: Red Hat Enterprise Linux 5.6
• 2010-11-10: Distribution Release: Red Hat Enterprise Linux 6
2 months elapsed from release of 6.0 before 5.6 and more than another month
before
On Thu, May 12, 2011 at 4:41 PM, R P Herrold herr...@owlriver.com wrote:
On Thu, 12 May 2011, Akemi Yagi wrote:
But, yes, there are a few missing srpms even as of now ...
bug number please
Jeff_S knows. He filed a bunch at upstream bugzilla requesting the
release of missing srpms.
Akemi
On Thu, May 12, 2011 at 5:31 PM, aurfal...@gmail.com wrote:
On May 12, 2011, at 4:47 PM, Ron Blizzard wrote:
CentOS chose another. Personally I happen to
agree with CentOS' choice here.
+1
I think *both* distros made the right choice. :)
CentOS and SL handle security updates differently.
2011/5/11 Rainer Traut tr...@gmx.de:
You could also ask on the elrepo mailinglist.
There was a request not too long ago.
http://lists.elrepo.org/pipermail/elrepo/2011-April/000637.html
So maybe you can install centos 5.4, then install their newer aacraid
driver and then you can update the
On Tue, May 3, 2011 at 12:50 AM, Steve Castellotti s...@eyemagnet.com wrote:
I check the @CentOS twitter feed several times per day.
I lurk in the #centos, #centos-devel, #centos-qa, and
#centos-social IRC chat rooms regularly.
I checked the centos and centos-devel mailing list
On Fri, Apr 29, 2011 at 8:57 AM, Todd Cary t...@aristesoftware.com wrote:
On 4/29/2011 8:21 AM, Les Mikesell wrote:
First, why would you disable key authentication? Or is it just failing
because you don't have the right key?
When I read the wiki (http://wiki.centos.org/HowTos/FreeNX), it
Johnny,
Thanks for releasing the fasttrack updates for CentOS-5. Could you
also provide the repo file for this?
Akemi
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On Wed, Apr 27, 2011 at 10:43 AM, Todd Cary t...@aristesoftware.com wrote:
WOW! A few choices. in checking the ssh configuration file, I
am setup using password authentication - not the best choice. If
I change that to NO, is it easy to change my ssh client? One
client I use is SSH
On Tue, Apr 26, 2011 at 5:24 AM, Steve Clark scl...@netwolves.com wrote:
Anybody know the reason RedHat decided not to support the
VIA Eden Processor?
(snip)
I traced it down to this code, which is not in the standard kernel.org
kernel-2.6.32.36:
from kernel-2.6.32.36
static void __cpuinit
On Tue, Apr 26, 2011 at 9:25 AM, Todd Cary t...@aristesoftware.com wrote:
Currently I have VNC running on my Windows desktop with Samba
providing access to my Linux server. Since Linux is more
reliable than Windows, I would like to be able to access my Linux
(Centos 5.5) via my Windows
On Sat, Apr 23, 2011 at 10:46 AM, carlopmart carlopm...@gmail.com wrote:
On 04/23/2011 07:32 PM, Mark Pryor wrote:
--- On Sat, 4/23/11, carlopmartcarlopm...@gmail.com wrote:
Somebody knows how can I extract/know an ip address
used by a kvm
etc)?? I don't use a dhcp or dns server on
On Thu, Apr 21, 2011 at 12:10 PM, Johnny Hughes joh...@centos.org wrote:
On 04/21/2011 11:01 AM, Kenni Lund wrote:
The XML-files in /etc/libvirt/qemu represent libvirt defined VMs, you
should never edit these files directly while the libvirtd service is
running. You should either use 'virsh
On Wed, Apr 20, 2011 at 1:03 PM, Filipe Rosset rosset.fil...@gmail.com wrote:
On 04/20/2011 04:53 PM, Andre Charbonneau wrote:
Hi,
I just finished installing a CentOS 5.6 x86_64 system and the first
thing I wanted to do after the install is to apply the software patches.
But I get the
On Wed, Apr 20, 2011 at 1:19 PM, Marcel Beerli m.bee...@awid.com wrote:
Another option is to exclude it on the command line
yum -x libuser update
/Marcel
Ah, yes. One note is that adding a * ( libuser* ) is recommended
because libuser-devel is also not signed. :(
Akemi
On Sun, Apr 17, 2011 at 7:52 AM, Leonard den Ottolander
leon...@den.ottolander.nl wrote:
Hi Akemi,
On Sat, 2011-04-16 at 18:18 -0700, Akemi Yagi wrote:
See also:
http://www.centos.org/modules/newbb/viewtopic.php?topic_id=30939forum=37
Please don't take this the wrong way, but not everybody
On Sat, Apr 16, 2011 at 10:50 AM, Nicolas Ross
rossnick-li...@cybercat.ca wrote:
Is it possible that the kernel in the centosplus repo is not up to date ?
The centosplus kernel I have is kernel-PAE-2.6.18-238.5.1.el5 and the
regular one is 2.6.18-238.9.1.el5...
I need the plus because of the
501 - 600 of 1586 matches
Mail list logo
