On 2/3/22 09:21, H wrote:
On 02/03/2022 08:39 AM, Joe Kline wrote:
I avoid using ' or " in one-liners or even programs.
I use q() or qq().
These are quote-like operators for single quote and double quote.
There are, of course, many more:
https://perldoc.perl.org/perlop#Quote-and-
I avoid using ' or " in one-liners or even programs.
I use q() or qq().
These are quote-like operators for single quote and double quote.
There are, of course, many more:
https://perldoc.perl.org/perlop#Quote-and-Quote-like-Operators
gizmo
___
CentO
What is todo?
Thanks a lot.
Joe
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
.
Joe
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
php 7.0 / 7.1 / 7.2 available in red hat scl:
php72:
yum -y install centos-release-scl
yum -Y install rh-php72
Am 16.04.19 um 00:39 schrieb MRob:
I know there's a couple third party repos offering PHP 7 for Centos. I
prefer not to add too much third party that I don't have to and PHP 7
has
0c:7c6c::1/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::9400:ff:fe17:6a4/64 scope link
valid_lft forever preferred_lft forever
I tried a lot of things from differnt howtos, but only with no success.
What the next steps to running docker with ipv6?
Thx.
Joe
Hello,
i m looking for a webrowser-based video conference/meeting server
running on centos 7.
I found jitsi, bigbluebutton, Apache OpenMeetings and more.
But none has a (good) tutorial for installing on centos.
You have a tip for me for a project or good tutorials?
thx.
joe
Any comment please?
How can I configure NetworkManager to shut down all interfaces when
stopping it?
Thanks,
Joe
On Wed, Aug 17, 2016 at 3:52 PM, Joe Smithian
wrote:
> Hi All,
>
> When I stop NetworkManager using the "systemctl stop NetworkManager", it
> doesn't br
Hi All,
When I stop NetworkManager using the "systemctl stop NetworkManager", it
doesn't bring network interfaces down. This behaviour is different than
network service in CentOS 5/6.
Is this the expected behaviour or a bug or configurable? I expected all
networking to be shut down down after st
Hi Neil,
Thanks for your comments. What's the purpose of creating spurious ‘bond0’?
It's confusing. Is it anywhere documented?
Every time I restart NetworkManager it creates another bond0!
Joe
On Thu, Jul 7, 2016 at 5:44 PM, Digimer wrote:
> On 07/07/16 05:36 PM, Digimer wrote:
-8e42-55ac3621a85d 802-3-ethernet eth1
*bond0460dd9e8-bc0b-473e-9c89-41facda98b66 bond
--# Why this extra bond connections has been created?*
I'd appreciate your comments and suggestions to fix the issue.
Thanks,
Joe
___
CentOS mailing l
ocumentation. RHEL 7 Networking Guide doesn't explain nmcli options in
details.
I'd appreciate your comments.
Joe
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
:)
On Wed, Apr 6, 2016 at 12:06 PM, Larry Martell
wrote:
> I make my password 'incorrect' so when I forget it the computer will
> say "Your password is incorrect"
>
> ;-)
>
> On Wed, Apr 6, 2
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
sts *in CentOS 7?
Thanks,
Joe
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
server and search domain for all interfaces.
/etc/resolv.conf is generated by NetworkManger and we cannot manually
modify it.
Thanks,
Joe
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
t be OK to disable
network service altogether and just use NetworkManger for configuring and
managing Ethernet interfaces. I care about wired Ethernet interfaces only.
I disabled network service and rebooted my machine without any networking
problem but I wanted to conform that that would be OK.
Thanks
what about RHSA-2014:0624-1?
On 06/05/2014 06:38 AM, Karanbir Singh wrote:
> CentOS Errata and Security Advisory 2014:0626 Important
>
> Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0626.html
>
> The following updated files have been uploaded and are currently
> syncing to the mi
dies, best
practices, tips and tricks, etc. What we avoid at Dojos are product
pitches or 101-type presentations that won't be useful for experienced
admins / users.
Please let me know if you have any questions. Thanks!
[1] http://lists.centos.org/mailman/listinfo/centos-promo
--
Joe Brockmeier
On 09/23/2013 09:39 AM, Leonard den Ottolander wrote:
> Hello,
>
> gpk-update-viewer on my CentOS 6 desktop gives me an error about
> untrusted updates. When running yum update from a terminal I get the
> following error:
>
> Package chkconfig-1.3.49.3-2.el6_4.1.x86_64.rpm is not signed
>
> No oth
Does CentOS get an early version of a beta release from Red Hat or not? I
assume select hardware vendors get early access but I didn't know who else.
Thanks,
Joe
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 03/03/2013 07:35 PM, Fred Smith wrote:
> On Mon, Mar 04, 2013 at 10:56:26AM +0800, Earl Ramirez wrote:
>> On Sun, 2013-03-03 at 21:49 -0500, Fred Smith wrote:
>>> Has anyone gotten 64-bit google earth to run on el6 x86_64?
>>>
>>> It dies almost immediately, complaining for lack of ld-lsb.so.3.
On 01/30/2013 09:44 AM, SilverTip257 wrote:
> On Wed, Jan 30, 2013 at 8:40 AM, Nux! wrote:
>
>> On 28.01.2013 13:07, SilverTip257 wrote:
>>> Google Auth
>>> http://www.noktec.be/archives/1351
>>>
>> http://zonereseau.com/en/post/two-factor-ssh-authentication-via-google-secures-linux-logins-392
>>
my nightly webalizer runs have gone from about 2 hours to over 8 hours.
this change happened sometime after november. webalizer hasn't changed
in years, but bind was updated in january, so i am thinking that is the
likely culprit. has anyone else noticed a similar slowdown? i am going
to dig throug
i guess that upstream doesn't consider the samba3x packages should be
treated the same way as other packages, but i just wanted to warn folks
that the recent samba3x update changed a default setting. if you rely on
hostnames in a hosts allow/deny clause (and possibly elsewhere), things
won't work u
have to create myself to have the hypervisor and VM aware
of each other?
- Joe
If you type "Google" into Google, you can break the Internet. -- Jen Barber
___
CentOS mailing list
CentOS@cento
#x27;m missing
I'm not seeing it.
Thx,
- Joe
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 11/09/2011 05:53 AM, Mike VanHorn wrote:
>> You'll probably need to add a pam_access.so reference to the stock
>> /etc/pam.d/password-auth. Make the first "account" line
>>
>>account required pam_access.so
> My CentOS system doesn't have a stock password-auth file. I tried creating
> one w
On 09/29/2011 09:23 AM, Alain Péan wrote:
> Hi Joe,
>
> Le 29/09/2011 18:18, Joe Pruett a écrit :
>> since you mention nis, i'll guess you use automount as well. so be
>> warned that centos 6 has some issues with automount. if automount
>> requests are mad
On 09/27/2011 11:55 AM, James A. Peltier wrote:
> I seem to have this very odd issue with CentOS 6 WRT NIS. I have taken the
> package selection that I used with CentOS 5 and basically plopped it into my
> C6 kickstart file (see below). On C5 this works just fine and I'm able to
> log in wit
o set these at install time using the
text based installer, eh? Such a shame.
On Tue, Jul 12, 2011 at 15:42, John Hodrien wrote:
> On Tue, 12 Jul 2011, Joe Mata wrote:
>
>> I'm doing my first 6.0 install the same way as I've always done my
>> server installs -- in text mo
I'm doing my first 6.0 install the same way as I've always done my
server installs -- in text mode. But it looks like there's no option
to do the following in the 6.0 text mode installer?
* Set hostname
* Set network settings
* Choose packages
I really hope I'm missing something because having t
On Sun, Feb 13, 2011 at 4:03 PM, Adam Tauno Williams
wrote:
> On Sun, 2011-02-13 at 20:28 +, Keith Beeby wrote:
>> Also seeing this issue with CentOS 5.4 and 5.5 with NFS shared
>> storage, according the the VMware knowledge base article this should
>> have been resolved in v5.1 update??.
>> D
NPUT
(Normal iptables config continues)
Also, once you add the rule with the iptables command, have you tried
iptables-save? That should give you a dump of all the rules that are in effect.
Joe
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
ure.cap not port 22` will drop all SSH traffic
from the pcap
`tcpdump -i eth0 -s 0 -w capture.cap not host ` will drop all traffic
to/from from the pcap
Joe
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On Thu, 16 Dec 2010, Benjamin Franz wrote:
> The man page for lastb says if you just complete delete /var/log/btmp
> the system shouldn't recreate it on its own.
>
> That is the simplest answer.
i have done this for now, but the initscripts rpm will recreate it for me
if it updates (how helpful
a while back i reported an issue where /dev/null was getting set to 600
perms after a system update. i finally figured out what it is. i don't
care about failed logins and have limited space on some servers, so i
symlinked /var/log/btmp to /dev/null. the initscripts package does a
chmod 600 /var
When you built openssh, didn't it also build the openssh-clients and
openssh-server RPMs? You should install them at the same in the same
transaction with your version of openssh:
rpm -Uvh openssh*-5.6p1-1.i386.rpm
On Mon, Nov 29, 2010 at 11:23 AM, bluethundr wrote:
> I have successfully crea
On 11/17/2010 10:35 AM, Robert Heller wrote:
> At Wed, 17 Nov 2010 10:16:51 -0800 CentOS mailing list
> wrote:
>
>> it looks like one of the recent updates will sometimes chmod /dev/null
>> to 600. out of 20 machines i've updated, 3 of them had the odd
>> /dev/null perms afterwards. i haven't
On Wed, 17 Nov 2010, Rudi Ahlers wrote:
>> Have anyone used both XEN & KVM before? What are your experiences
>> with either, in comparison to each other? We've been using XEN for
>> about 4 years now, and only use CentOS as our server platform. I'd
>> hate to move to Debian or OpenSuse just for
it looks like one of the recent updates will sometimes chmod /dev/null
to 600. out of 20 machines i've updated, 3 of them had the odd
/dev/null perms afterwards. i haven't tried to identify what it doing
it yet, but wanted to give a heads up to others that might start seeing
weird behavior.
_
the big piece that i've been waiting for is ipv6 stateful firewalling.
without that, ipv6 has been a non-starter for me.
On 11/10/2010 12:43 PM, Matthew Miller wrote:
> On Wed, Nov 10, 2010 at 02:40:52PM -0600, Matt wrote:
>> What does 6 bring with it? Anything new in virtualization and cloud
>
> Fedora 13 does save the guest on shutdown so I would expect this will be
> supported in RHEL6/CentOS 6 too. But when do you actually power down a
> RHEL/CentOS server? And if you did, wouldn't you have migrated the
> guests to another box already?
>
mainly it is an issue for a quick reboot of th
as i'm reviewing the courseware for the rhel (centos) course
i'm teaching next week, i'm going to ask the occasional question,
possibly technical, possibly more policy.
first one involves the choice for virtualization. the course has a
short section involving virt using xen but everything i've
I went to the CentOS documentation page (http://www.centos.org/docs/5/)
looking for some documentation on 5.5 but was surprised there is nothing
there post-5.2. Is there another place I should be looking?
Thanks,
Joe
___
CentOS mailing list
CentOS
On Wed, 2010-03-31 at 13:14 -0500, Les Mikesell wrote:
> It's about time someone did that. I completely gave up on Fedora
> after version 6 and unsubscribed from the mail list because they were
> only interested in changing things and adding features, not making
> anything work. Has it become us
I have a server with no desktop - just cli that i need to have a user
plug in a usb hd and would like it to automount to a consistent
directory so I can schedule a backup. The user can rotate the usb
drives and it all just works.
Any ideas how automate so that say /media/backup mounts to any usb
On 03/12/2010 04:19 AM, Rudi Ahlers wrote:
> Does anyone know how I can monitor our server's for blacklisting? We
> run a large amount of shared hosting& reseller hosting servers and
> from time to time one of the IP's will get blacklisted. I'm looking
> for a way to be notified if any of our IP's
>> what in the docs are you reading to indicate forcetype won't work?
>
> http://httpd.apache.org/docs/2.2/mod/core.html#forcetype
> says it works only if given in directory-type context and that's unlikely to
> happen here. You would rather set the FilesMatch global.
i think that directory contex
>> I had both of these on my server, and just now replaced them with
>> similar sections.
>
> Just a comment about the FilesMatch thing. The proposed additional
> ForceType will not work in there according to the httpd docs. Not that
> this makes a big difference.
what in the docs are you reading
becomes an issue is web
>> apps that allow uploads into the webspace for images, pdfs, etc. if the
>> app assumes that anything.jpg is safe, this addhandler feature will
>> surprise it.
>
> Hi Joe,
>
> Are you sure this is limited to just CentOS? I've seen that confi
a recent post on bugtraq hilighted an issue with how upstream has
configured apache to invoke php, namely using addhandler, which has the
behavior of matching the extension anywhere in the file. this means
that foo.php.jpg will be run as php. where this becomes an issue is web
apps that allow
> Hi! Did anyone tried this on 5.4? having a look on
> http://wiki.centos.org/HowTos/Install_On_Partitionable_RAID1
> is would seem that that mkinitrd patch is no longer required.
> Can someone ack this?
i just looked at the mkinitrd on my stock 5.4 system and it does not seem
to have patches in
I have a usb hd that I use for backup. Occasionally it dies.
scsi 6:0:0:0: rejecting I/O to dead device
scsi 6:0:0:0: rejecting I/O to dead device
scsi 6:0:0:0: rejecting I/O to dead device
scsi 6:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdc1, logical block 0
lost page write
> Has anyone succesfully setup, and used CentOS as an iSCSI server? I'm
> trying to setup a server with 4x500GB HDD's, setup in RAID 10 to act
> as an iSCSI server for a virtualization project, but I can't find a
> decent howto on how to setup an iSCSI server using CentOS.
>
> I would like to setup
> H, OK, I get it.
>
> I know I can build the latest Apache on CentOS, and what we currently
> do is put it into /usr/local - which I guess works.
>
> I'd really prefer to have an RPM though.
>
> Certainly the CentOS team as a way in which they produce this RPM.
> Is this method public? And if
On Sat, Jun 27, 2009 at 12:21 PM, Mag Gam wrote:
> WE have a centos 5.3 install, and our server is keep getting hacked.
> We see load averages of 500+ and see people from all over the world
> logging into our server (used last).
>
> Is there a good place to start to avoid these kinds of things?
>
>
> Kai Schaetzl wrote:
>> I've been getting over the last months several of these notices. Sometimes
>> a few per day. What's the problem? Can't this be avoided?
>
>>The mail system
>>
>> : mail forwarding loop for centos@centos.org
>
> I haven't the faintest idea *why* those hap
>> I know...google...BUT:
>> Does someone has good howtos, docs, descriptions, opinions in forums, or
>> similar things about IPv6 and "related things"?
>> I just think it would be a very good idea to collect some links about it...
>> Regards, and thank you in anticipation
>
> The wiki ( wiki.cento
Would you be willing to make the RPM available?
On Tue, Apr 28, 2009 at 2:56 PM, Joe Pruett wrote:
as i was waiting for the c5-testing repo to catch up with redhat, i went
ahead and built my own. i had to take the php-extras rpm and merge the
php changes between 5.1.6 and 5.2.6 into it
> I am using the c5-testing repo to fetch PHP 5.2.6 and related
> libraries, required for the LAMP apps that I want to use. php-mcrypt
> still seems to come from the extras repo and is version 5.1.6 and the
> php binary doesn't load this module.
>
> Any ideas on howto get php-mcrypt 5.2.6?
as i wa
has anyone replaced the sun jdk with the new openjdk and had any issues?
i had forgotten it was now in 5.3 until the errata announcement came
through.
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
i think that previous versions did this as well, but for sure the newest
ypserv in 5.3 replaces /var/yp/Makefile with a new copy. needless to say
if you've made any changes to that file, you will not be happy. we had a
couple hours of phone calls after passwords stopped working. the original
Each node is also an nfs server (centos 4.7)
One nfs server per user.
I think it is still nfsv3, I will consider upgrading to v4.
On Fri, Feb 27, 2009 at 1:47 AM, Rainer Duffner wrote:
>
> Am 27.02.2009 um 01:44 schrieb Joe Barjo:
>
> > I'd also like to test gfs for a 30 no
I'd also like to test gfs for a 30 nodes cluster with sge.
Tasks are often quite short, files are also quite small. Job rate can be
quite high (can reach 10 to 20/second)
We actualy use NFS under centos4.7 and experience coherency problems.
I tested AFS, lustre, glusterFS. All showed too much overh
>> Anyone knows any Cisco netflow analyzer that could run on Linux/Windows? I
>> know that cisco ASDM works at somewhat level but too rough...
>>
>> For example, CIsco ASDM can only shows at IP level and only three types
>> graph, like top 10 source Address, top ten destination level, or top ten
>>
the problem is mixed up session ids. i have made a quick patch based on
the upstream update. i've attached it. it is for the c4 version,
but probably would apply to c5. apply it with:
cd /usr/share/squirrelmail
patch -p3 < FILE
also, after this sometimes customers will have to clear the SQ
On Wed, Jan 7, 2009 at 6:36 PM, Max Hetrick wrote:
> René Standfest wrote:
>
>> We have running at the moment eGroupWare, but we plan to migrate to SOGo
>> (http://sogo.opengroupware.org) in the next two months (we had some annoying
>> problems with eGW in the past). It has a really cool Webfronte
I just took my first cent server into production and now saslauthd
keep crashing after brute force attack.
I found a bug report so this has already been reported but not fixed.
http://bugs.centos.org/print_bug_page.php?bug_id=2860
I assume this has to be a large problem for many people and am
su
know how to re install grub from the debian. Under chroot,
there are no devices.
It seems that the root filesystem doesn't even get mounted, as I have no
logs at all.
On Thu, Nov 20, 2008 at 5:04 PM, Lorenzo Quatrini <[EMAIL PROTECTED]> wrote:
> Joe Barjo ha scritto:
> > Hel
Hello
I'm willing to change my dedicated server hosting provider, and transfer my
existing server to the new one.
I don't have kvm access, but both servers are centos5.2
I can boot a network image that is debian based and have access to the disk.
Then I tried to rsync -a my first server to the des
one else seen this before?
- Joe
Failure is always an option -- Adam Savage
_
When your life is on the go—take your life with you.
http://clk.atdmt.com/MRT/go/115298558/direct/01/___
C
That was it!!! Thank you very much!
--
From: "Ned Slider" <[EMAIL PROTECTED]>
Sent: Saturday, October 11, 2008 11:07 AM
To: "CentOS mailing list"
Subject: Re: [CentOS] Unable to use SSH password-less logins
Joe Tseng
I am trying to ssh from my Windows/Cygwin xterm window into my CentOS52
servers w/o using passwords but my keys seem like they're being ignored. I
created the key in cygwin using:
$ ssh-keygen -t dsa -f id_dsa
And copied id_dsa.pub over to centos:~/.ssh/authorized_keys
Ideas?
tia,
Anything like this would probably have to be an upstream thing. But it
would probably be a good idea for people to put this into their
kickstart configs...
i think that the yum setup diverges from upstream already, so i don't see
this as a big change from that.
___
also, i'd like to suggest that the priorities plugin be made added to the
base install and that the centos-base repos be configured with priority 1.
it looks like c4 has the priority setting, but c5 doesn't and neither have
the plugin installed. it seems like this would create a little more
st
rpmforge has just released a new perl-DBD-mysql for el4 that has an
obsoletes against perl-DBD-MySQL and the protectbase yum plugin doesn't
grok obsoletes. the priorities plugin does. so if you are having issues
with this, install the yum-plugin-priorities first, make sure that the
CentOS-Bas
oint me to the
howto use mysql on CentOS/RHEL info. I just need to be able to start
adding db's and such. Once there I'm good to go.
Thank you in advance,
Joe
[1] I know, I should upgrade but, as I mentioned, I'm a real lazy guy.
--
Using Linux since 11/1991 | http
my poor little toshiba libretto (p-120) won't boot with the new 4.7 i586
kernel. i've reverted back to the previous kernel for now. anyone else
using the new i586 kernel successfully on old hardware?
___
CentOS mailing list
CentOS@centos.org
http://l
from looking at the regexs for the subscriptions, i can see that the
announcement would not be caught by any of the arch specific
subscriptions. so that explains why i (and probably others) didn't see
it. mystery solved.
___
CentOS mailing list
Cent
i (and others) have missed messages on centos-devel as well. did other
people not see the 4.7 announcement message? i'm wondering if the centos
list server is having some kind of issue.
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.or
I've been trying to install perl-Tk and I learned v804.028 uses libpng >
1.2.20; CentOS 5.2 still uses 1.2.10. Is there an RPM out there I can use
that's > 1.2.20? I'm just afraid of compiling from source code and breaking
all the apps that depend on what's on th
ect: Re: [CentOS] LCD blanks out overnight
> From: [EMAIL PROTECTED]
> To: centos@centos.org
>
> Joe Tseng wrote:
> > I inherited an ancient Dell Latitude C840 and recently installed CentOS 5.2
> > on it. It worked fine for the most part, but when I left it overnight a
l-alt f1 would fix this. Sine that isn't working,
> have u tried switching to external vga and back. That did the trick
> for me on Dell Latitude C610's.
>
> On 9/9/08, Joe Tseng <[EMAIL PROTECTED]> wrote:
> > I inherited an ancient Dell Latitude C840 and recentl
power management settings
and left it set like a desktop, the next morning after that it still blacked
out. I thought maybe it'd come back if I switched from X to a virtual text
console, but that didn't do the trick. Has anyone seen this and what do I do
to fix it?
i haven't found anything online to talk about this, so maybe i've got
something odd going on here. i have my xen set up to save/restore on dom0
reboot. almost everything works fine, but cron on the guest os'es
(everything is centos 5 x86_64) stop processing jobs. i'm guessing it is
missing a
On Thu, 29 May 2008, Johnny Hughes wrote:
This is already solved on another thread ... but for closure on this one,
there is a known bug here with that kernel and ipsec:
http://bugs.centos.org/view.php?id=2853
that bug entry does say to use the upstream bug for info about a
workaround, but
On Thu, 29 May 2008, Ned Slider wrote:
See here:
http://bugs.centos.org/view.php?id=2853
thanks. i had looked in the upstream bugzilla and not found anything
obvious, but didn't think to look at the centos bug database. i'll
remember that for next time.
___
i had previously been having issues with automount being slow with this
new kernel and i tracked it down to dns delays which were being caused by
ipsec not working. i have spent a few hours poking around and ipsec seems
quite broken with this new kernel. esp packets go in and out just fine,
b
On Sat, 24 May 2008, Marko A. Jennings wrote:
What type(s) of filesystems are you experiencing this with? I am seeing
no additional delays with CIFS filesystems after the upgrade.
for nfs mounts. i am using a centos 4 nfs server, but from running strace
and enabling -d for automount, the de
after this latest centos 5 kernel update, i am seeing 40 second delays on
automount points. nothing in the rpm changelog looks obviously related to
autofs and the autofs module seems to be the same as the previous kernel.
i'm starting to do some strace'ing and other debugging, but nothing has
Hello,
in system-config-date i have checkbox synchronize date before service
startup.
Which config switch,file does it affect? I want to turn it on on my CentOS
machine without xauth , just editing config files , i was hoping it could
be
in /etc/sysconfig/ntpd but no.
ok ... I do not see exact
a dot in it?
Thanks,
--Joe
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
etc/resolv.conf for the second short name (proteome.vlan88). Any
idea what can I do to get this working?
Thanks,
--Joe
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Right. And maybe Microsoft will change the licensing for Windows to
GPL.
Anyway, thanks much,
Joe
--
Boring Home Page - http://www.webtrek.com/joe
See my blog, sumo game ranks and other interesting junk
___
CentOS mailing list
CentOS@centos.or
e the
offending lines from the shadow file? Is there a utility or script that
will sync them in a less potentially destructive way?
Any pointers to info on this are greatly appreciated.
Thanks,
Joe
--
Boring Home Page - http://www.webtrek.com/joe
See my blog, sumo game ranks and ot
://www.webtrek.com/joe
See my blog, sumo game ranks and other interesting junk___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
pe which I can't update to due to yum being petulant.
If anyone can shed some light on this or point me in the right
direction to get this fixed it would be greatly appreciated.
Thank you,
Joe
--
Using Linux since 11/91 | http://www.
agree w/ Miark - i spent a month thinking my rebooting issue was
software when it turned out to be a failing battery backup unit.
On 9/5/07, Miark <[EMAIL PROTECTED]> wrote:
> > my other question where can i look (logs, files,
> > Directories) or something to install to see what is
> > causing the
he updated update from the
Axe-man.
--
Boring Home Page - http://www.webtrek.com/joe
See my blog, sumo game ranks and other interesting junk
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
1 - 100 of 112 matches
Mail list logo
