I think your SOL regarding buying just the TOP bearing, it's an integral
part of the turn signal switch.
" to much side movement" it this movement felt/observed with the steering
wheel and column complete? Why I ask is the installation of the steering
wheel and spring preloads the upper and lowe
Title: Upper steering bearing
I have an extra turn signal assy with the bearing
in it. Do both types of assemblies take the same type of bearing? Let me know
which type you have (assuming the bearings are different). If mine will work, I
can clean and repack the bearing to see if it's any goo
At 10:21 PM 4/10/2006, you wrote:
Does anyone have the GM part number
for the upper bearing for a floor shift 1966 steering column? I don't
want to have to buy a compete turn signal assy just to get a
bearing. My bearing appears OK, but there is too much side to
side movement. I am hoping som
Please remove me from the mailing list
Thanks
john
I have the samd issure with my 67 chevelle, no one seems to have the bearing available.
John Beekley
-Original Message-From: The Hanks <[EMAIL PROTECTED]>To: Chevelle-list@chevelles.netSent: Mon, 10 Apr 2006 22:21:17 -0500Subject: [Chevelle-list] Upper steering bearing
Does anyone
i kept this, maybe you can use it, its not as fun
as picking on people, mut much more informative.
This is a reminder, sent out once a month, about your
chevelles.netmailing list memberships. It includes your subscription
info and howto use it to change it or unsubscribe from a list.You
c
At 09:54 AM 4/11/2006, you wrote:
I have the samd issure with my
67 chevelle, no one seems to have the bearing available.
John Beekley
I have bearings, but after replacing one that was not it!
Take steering wheel off, mark the clamp at the bottom of
the steering column, let the clamp lose &
I tried that, but the upper bearing still has some side play. Where did you find upper bearings??
Thanks
-Original Message-From: Dave Corgill <[EMAIL PROTECTED]>To: The Chevelle Mailing List Sent: Tue, 11 Apr 2006 10:10:54 -0500Subject: Re: [Chevelle-list] Upper steering bearing
At 10:23 AM 4/11/2006, you wrote:
I tried that, but the
upper bearing still has some side play. Where did you find upper
bearings??
Thanks
I bought 3 15 yrs ago from a place in Phoenix AZ. I'm
sorry but I don't remember the name.
OK, I saved the info.
Ron Anderson
Arizona Classic Chevelle P
Killjoy!! :-D I thought it was odd that this fellow John Beekley
asks to be taken off of the list at 9:51AM, then makes two posts at 9:54
AM and 10:23 AM. Do you really want off the or are you just messing
with us?
BillL
At 09:57 AM 4/11/2006, you wrote:
i kept this, maybe
you can use it,
Dave his address has changed
to 14636 North 68 drive, Peoria 85381. (602) 647-1596 He still deals with 64-72
chevelles everyday. Plus 67-72 chevy trucks. He has been a great resource and
friend for 14 years.
Paul
67 Elky
ACES
Az CHVL club
- Original Message -
From:
Dave Cor
Funny guy.
He asks to be removed, and then 2 minutes later
responds to someone's post...
Karl GrovesMaster Certified CIWhttp://www.karlgroves.comWill Work
For Parts:http://chevelle.karlcore.com/detail.php?id=3
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesd
He just realized that he really doesn't want off this list.-Original Message- From: Karl Groves <[EMAIL PROTECTED]>Sent: Apr 11, 2006 11:57 AM To: 'The Chevelle Mailing List' Subject: Re: [Chevelle-list] Upper steering bearing
Funny guy.
He asks to be removed, and then 2 minutes later r
why would anyone want off of such a great list
anyway?
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED] ; The Chevelle Mailing List
Sent: Tuesday, April 11, 2006 11:06
AM
Subject: Re: [Chevelle-list] Upper
steering bearing
He just realized t
I have a 72 ss Chevelle Malibu for sale I
just don’t know how much to sell it for any ideas? The car is in great
shape looks good. Cobalt blue with white roof top.
-Original Message-
From: Ken's Email
[mailto:[EMAIL PROTECTED]
Sent: Monday, April 10, 2006 7:13
PM
To: The Chev
Where are you located???
Jim Buckingham
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bette
worrellSent: Tuesday, April 11, 2006 1:23 PMTo: 'The
Chevelle Mailing List'Subject: Re: [Chevelle-list] SBC top end pkg
FOR SALE
I have a 72 ss Chevelle
Malibu for sale I just
check out ebay, i just looked and there are several for sale in different
condition. you have a gold mine.
From: "Bette worrell" <[EMAIL PROTECTED]>
Reply-To: The Chevelle Mailing List
To: "'The Chevelle Mailing List'"
Subject: Re: [Chevelle-list] SBC top end pkg FOR SALE
Date: Tue, 11 Apr 2
I am located in San Diego, California near Shelter Island. I have had it estimated
at about 18,000 but just don’t know. Looking for others who might
now about pricing.
-Original Message-
From: Jim Buckingham
[mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 11, 2006
10:26 AM
To:
Isn't there a company in New Youks state that rebuilds
factory steering and maybe sells parts?
--- Dave Corgill <[EMAIL PROTECTED]> wrote:
> At 10:21 PM 4/10/2006, you wrote:
>
> >Does anyone have the GM part number for the upper
> bearing for a
> >floor shift 1966 steering column? I don't wan
There's a place right on I-35 in north Fort Worth that does this.
Clint Hooper
H&H Custom,owner
1969 El Camino protourer
2001 H-D FLHR custom bagger
http://dalesplace.com/misc/friends/clint/clint_hooper.htm/
"You may find me dead one day in a ditch. But by God,you'll find me in a
pile of brass."
-
Please remove me from your mailing list..Thanks,
Ed
Two in one day!! Why're we pi$$ing all these people off?? NO,
NO, NO we will not remove you, you must do it yourself!!! Didn't
you see the post earlier today or do you just delete everything?
Why did you get on in the first place, and why do you want off?
That's the deal now, you must give
Bill,
that's actually a pretty good idea. I mean, since these folks are
obviously smart enough to sign up for this list, they should be smart
enough to figure out how to get off this list. From now on, the only
way to get the instructions to get off this list is if said person provides
a
Herb,
Sounds good to me.
But, let me check with my wife first! :)-Original Message- From: Herb Lumpp <[EMAIL PROTECTED]> Sent: Apr 11, 2006 4:43 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Remove Me from Mail Lis
Bill, that's actually a pretty good idea. I mean, s
Thanks to everone who responded, I worked on the preload and that
corrected the problem. Amazing there is so much information on the
list. Thanks again for the information and help. David
David Hanks
1966 SS396
1974 Corvette
ACES 6782
Team Chevelle 1940
Pilot Point, TX
-Original Message
Hi All
Does anybody have the current Year One code? The one I have is outdated.
I'm going to get a set of Super Comps headers. Would that be a good choice? And
is Year One an OK place to get them? Thanks in advance.
Tom Purtzer
Just curious but why the Super Comps? What year car? Stock ride
height,raised,or lowered? SBC or BBC?
Clint HooperH&H Custom,owner1969 El Camino protourer2001
H-D FLHR custom baggerhttp://dalesplace.com/misc/friends/clint/clint_hooper.htm/"You
may find me dead one day in a ditch. But by God,y
Hi Clint..
No idea except I had Hookers on my SS 25 years
ago..Would there be a better choice? It's 67 with a 396/400+hp 5speed, and
stock height..I'm open for suggestions..thanks,
Tom Purtzer
You can get Super Comps anywhere, and I would bet that Year One would
be your most expensive place to buy them.
Try Jegs/Summit, and other places (ebay).
When I bought a set a few years ago, I got them right from Jett-Hott
and they had the best price around by a long shot.
And FWIW, I have
hi all. i have a 70 malibu in need of some tlc. i've been told the motor is'nt a 307 like the fender emblems say. the casting numbers on the engine are 1CA110056 and TI005DE. also i noticed the engine is sitting crooked, it appears to have a broken motor mount. are these hard to replace for the av
DE shows it to be either a '68 307 or a "58 or "62 283.
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.
Like I said,Tom,I was just curious. There's a decent selection of A-body
headers available. What's the going rate for a pair of Super Comps?
Clint HooperH&H Custom,owner1969 El Camino protourer2001
H-D FLHR custom baggerhttp://dalesplace.com/misc/friends/clint/clint_hooper.htm/"You
may find
I know that it is always turning heads when I drive. God knows it is not
me. Thank God for hot rods.
-Original Message-
From: timothy mcguire [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 11, 2006 12:21 PM
To: Chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] SBC top end pkg FOR
You guys might change the Subject line. Sounds like a nice car but I'm sure
Mike would appreciate folks not hijacking his SBC parts for sale ad.
Thanks,
Clint Hooper
H&H Custom,owner
1969 El Camino protourer
2001 H-D FLHR custom bagger
http://dalesplace.com/misc/friends/clint/clint_hooper.htm/
"You
For the ceramic coated Super Comp I've seen anywhere from 650 at
Jegg's/Summitt to 930 at Performance Auto Parts, don't think I'll go
there..haha..Year One had them for 707. So I thought if I could get their
discount code that would bring it down.
tom p
Well this guy at least said please.
--- [EMAIL PROTECTED] wrote:
From: Bill Lessenberry <[EMAIL PROTECTED]>
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] Remove Me from Mail Lis
Date: Tue, 11 Apr 2006 15:36:41 -0500
Two in one day!! Why're we pi$$ing all these people off?? NO, NO
Tom;
I have a set of Hooker Comp Ceramic coated headers on my 71 Malibu/SBC. They have about 5000 miles on them. Need to replace them since I did the 2" dropped spindles and GW 1 1/4' drop rear springs thing. Three and 1/2 inches of clearance is not enough, going with Sanderson mid length.
I pa
Stainless Works sells their stainless steel BBC headers for $765. They only
show a 68-72 application but I do know the owner has a 67 Chevelle.
Clint HooperH&H Custom,owner1969 El Camino protourer2001
H-D FLHR custom baggerhttp://dalesplace.com/misc/friends/clint/clint_hooper.htm/"You
may fin
Hi Denny..
That sounds good except I need a set for a big block..otherwise I'd be
interested..maybe I should look at the mid length, although I'm not planning on
lowering it. thanks for the offer..tom
Jumped in the 72 Monte Carlo and made quick trip to auto parts store.
On way back to shop cruising along with Aretha Franklin on CD player,
A/C blowing cold air when suddenly the trans downshifted into 1st, like
hitting brick wall, was doing 50mph at time in OD. Have a Phoenix built
2004R. It
That sure doesn't sound good,D.R. Let us know what you find out.
Clint Hooper
H&H Custom,owner
1969 El Camino protourer
2001 H-D FLHR custom bagger
http://dalesplace.com/misc/friends/clint/clint_hooper.htm/
"You may find me dead one day in a ditch. But by God,you'll find me in a
pile of brass."
--
when you sign up for this list, its for life," blood in, blood out"
From: <[EMAIL PROTECTED]>
Reply-To: The Chevelle Mailing List
To:
Subject: Re: [Chevelle-list] Remove Me from Mail Lis
Date: Tue, 11 Apr 2006 17:37:03 -0700 (PDT)
Well this guy at least said please.
--- [EMAIL PROTECTED] wr
I'm trying to be nice about it. I just want off the list. I shouldn't have
to have a reason! If you will not remove me, I will take other
action.
Take all the action you want,dude. None of us can remove you,anyway. Only
you can unsubscribe yourself.
Clint HooperH&H Custom,owner1969 El Camino protourer2001
H-D FLHR custom baggerhttp://dalesplace.com/misc/friends/clint/clint_hooper.htm/"You
may find me dead one day in a ditch. But by God
If you can’t
figure out how to get off the list (this assumes that you do not read the monthly
reminder email and forgot how you got on the list), you can always change your
email address. Problem solved!!
As Clint
said, none of us have the power to get you off the list. You have to do
45 matches
Mail list logo