I was wondering if anyone has rebuilt their manual steering box. Is it a DIY
kind of thing? Where do you get the kit to do it? Can it be changed to a
quicker ratio? What about prices? Thanks for any info Steve
Thanks Rick, those links were very helpful for the rear brakes HAPPY CRUSIN
-Original Message-
From: Rick Schaefer
To: The Chevelle Mailing List
Sent: Wed, Apr 7, 2010 5:35 pm
Subject: Re: [Chevelle-list] rear drum brakes
http://auto.howstuffworks.com/auto-parts/brakes/brake-ty
tell us where you are located
-Original Message-
From: n30pac...@aol.com
To: Chevelle-list@chevelles.net
Sent: Fri, Apr 9, 2010 10:50 am
Subject: [Chevelle-list] 454 eng.
454 eng. all stock from carb to pan, runs good can still here run, anyone
interested reply to
n30pac...@aol.co
Hi Guys, took the rear out of the 70 chevelle to put C-Clip eliminator kit in
and was wondering if anyone has a link to a GOOD diagram on how to reinstall
the drum brakes and related springs and such. Its been apart for a while and
just want to be sure I get it back together correctly. Oh and ye
Hello to the list. I was wondering if anyone has that e-mail with the "old drag
race pictures" If so could you send it to me thanks
Hi Guys, was wondering if someone knows how the package tray on a 70 chevelle
is removed. What holds it in? I alsowas wondering about the order of install of
the trunk divider board and insulation. Thanks steve
Ecklers has all the single numbers to make what you want Personally I like the
"327" idea? I have a 468 chevelle with the original "396" on the fender? A
little harder to hide the sound of a 496 to pass it off as a 327? ENJOY
-Original Message-
From: Tom Rightler
To: The Chevelle Maili
I was thinking to check voltage in the wire harness connector before it plugs
into the printed circut board
-Original Message-
From: rml...@comcast.net
To: The Chevelle Mailing List
Sent: Sat, 16 May 2009 3:16 pm
Subject: Re: [Chevelle-list] printed curcuit ?
Iam not really sure what
I would maybe unplug the connector to the printed board and check with a test
light all the connections for the gauges to make sure the problem isnt before
the printed circut board? maybe save ya from buying something you dont need
-Original Message-
From: jessfedr...@bellsouth.net
To:
did you check the round canister that controls the turn signals? Posibility?
-Original Message-
From: Dan Rachlin
To: The Chevelle Mailing List
Sent: Fri, 20 Mar 2009 7:15 am
Subject: Re: [Chevelle-list] My daughters car
Check the owners manual, or turn it on and follow where the cli
Hi everyone and a HAPPY NEW YEAR WISH TO ALL. I was wondering if anyone has any
info on how to properly adjust the front windows on a 70 Chevelle SS. I think I
have em good and when I put the door pad back on they seem to hold the glass
out more and the adjustment is wrong again. Thanks for the
Hey John, Our most sincere thoughts and prayers are with you and your family.?
steve
-Original Message-
From: John Nasta <[EMAIL PROTECTED]>
To: chevelle-list@chevelles.net
Sent: Mon, 18 Aug 2008 11:55 am
Subject: [Chevelle-list] signing off for a while
Unfortunately my brother was kil
Hey Larry, try this site, was a BIG help for me?
http://chevelleengineer.home.comcast.net/chevelleengineer/fuelgage.htm
Steve
-Original Message-
From: [EMAIL PROTECTED]
To: chevelle-list@chevelles.net
Sent: Thu, 12 Jun 2008 1:42 am
Subject: Re: [Chevelle-list] fuel gauge
Mine
Hey Harlan, I just went thru the same thing. Could be the ground, the sending
unit or the gauge itself. If you check out this web site it is really great
info on how to check problem??
http://chevelleengineer.home.comcast.net/chevelleengineer/fuelgage.htm? or look
in the Chevelle Forum gor The
Hey Rich THANKS for the GREAT info. I didnt even think to check the web site
first. Thanks again that was a awsome bit of info? Steve
-Original Message-
From: Rich Pruett <[EMAIL PROTECTED]>
To: The Chevelle Mailing List
Sent: Mon, 2 Jun 2008 5:41 pm
Subject: Re: [Chevelle-list] speedo
I have a Tremec TKO 600
-Original Message-
From: Dan Rachlin <[EMAIL PROTECTED]>
To: The Chevelle Mailing List
Sent: Mon, 2 Jun 2008 7:49 am
Subject: Re: [Chevelle-list] speedo gear in trans
What tranny do you have?
Hi guys, just a quick one. If your speedo shows 10 mph less than you are going
do you need a gear with more or less teeth to get it up to the correct mph??
Thanks again?? Steve
I have a 70 with a full roller 461 BBC and I installed a Edelbrock alumium
water pump and had a radiator shop here in Mich make me a 4 core rad and I
never get over 180 degrees with a 160 stat. Four Seasons Radiator shop is Much
cheaper that a Be Cool or anything like that? Good Luck? Steve
--
Hey guys, I need to eplace the sending unit in my 70 SS and was wondering how
the filler neck comes off the tank so I can remove the tank. There is no rubber
connecting piece or any type of clamp holding it on. I put 3" exhaust on the
car so removing the tank with the filler neck on it as a unit
Hey guys was just wondering if there is a electrial test to tell if a fuel
guage was faulty or if it is the sending unit. It worked fine last fall and
just got the car out and its no working. I cleaned the ground wire and metal on
the body it attaches to and still dont work?? Thanks in advance??
Hi guys well the list is pretty slow but I am in the process of replacing the
master cylinder on my 70 and have a question for ya. I had a round style that
was on the car with the bleeder screws in it. It was pretty much a waste so I
got the square style with out bleeder screws that I believe to
Thanks Dan, you have also provided me other info before and I surely appreciate
it ALL?? Thanks?? Steve
-Original Message-
From: Daniel Solomon <[EMAIL PROTECTED]>
To: The Chevelle Mailing List
Sent: Thu, 28 Feb 2008 10:34 am
Subject: Re: [Chevelle-list] master cylinder bench bleeding
Hi guys I had to replace a master cylinder on the 70 and I got the one with no
bleeders on it. What is the process to properly bench bleed it?? Thanks? Steve
Hi guys, was just wondering what the difference is between a master cylinder
with the bleeders and one without the bleeders? Thanks? Steve
More new features than ever. Check out the new AOL Mail ! -
http://webmail.aol.com
To Chuck S. thanks for thwe reply to the clock stem question.I looked at year
one web site and couldnt find any clock stems. Do you happen to remember a
part number? Thanks again Steve
**Start the year off right. Easy ways to stay in shape.
http://body.aol.com/fitness/wint
Hi guys hope all had a great holiday season. Now its time to get back to work
on the chevelle. I was wondering if anyone knows where I could get a new stem
for my dash clock for a 70 SS with the round clock Thanks you all have been
a great help in the pastSteve
**Start the y
Hi guys was wondering about the correct way to bleed the disc/drum power
brake system on a 70 chevelle? I think i read some where that you need to hold
open the prop valve while bleeding (?) does the booster require vacumn during
bleeding? is there a way to tell if the booster is bad? if the mas
I did that very swap this year in my 70 with 525 hp Rat. It is a piece of
cake. I already had a center force clutch so all I bought was the TKO600 and
the
yoke and speedometer adapter. The cross member only has to be moved rearward a
little and the holes are already in the frame. You have to sh
Hi guys was wondering if there is a fix for a stuck factory tach? It is
stuck on 6500 rpm. Is it just toast or what Thanks Steve
** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
Hi dennis I am running a newly installed tremec 5 speed in a 70 chevelle
with a 525 hp big block the only thing I did was run a set of KYB gas shocks
with
the stock control arms that were factory boxed wioth BFGoodrich radial TA's
and that stopped my wheel hop. Just my experience good luck
I was wondering if anyone can help me to decode the numbers off a 700-R-4
trans? Which numbers are the ones to use? Seems like there are numbers every
where Thanks Steve
** See what's free at http://www.aol.com.
Hi all was wondering if anyone can give me a value to ask for a Muncie M-21
trans. I got a new Tremec and no longer need the M-21 It was opened up for a
look inside and all was ok but some expected wear on the gears. Was working
fine
when removed from car. Thanks Steve
Hi all was wondering if anyone can give a ride height measurement for a stock
70 BBC chevelle? also is anyone going on the Power Tour this year? Thanks
Steve
** See what's free at http://www.aol.com.
If you go to Hot Rod magizine web site they explain it all but in short it is
a 6 city cruise starting in Cleveland Oh then to Kalamazoo Mi then to Racine
Wi and so on. I am near Flint Mi and we are going to Cleveland on Fri the 1st
of June and then comming to Kalamazoo on Sun 3rd. I dont have t
Hi, guys was wondering if anyone in Michigan is going on the 07 Power tour?
This is my first post although I look in on the site often See ya at the
power tour.. no rain
** See what's free at http://www.aol.com.
I do all my parts buying from NPD. Glad to say I havent needed any lately
but getting ready .. I think NPD is the best of all of
them
Hi , yes I am running a set of Quick times on my 461cu/in 70 chevelle and
they are really great. No problems and they are a lot of fun especially at a light with a stang beside. I have had no leaks as
I put a thin bead of TRV black and it works perfect. Those guys at Quick time
are great and
Yeah Tell the guy to buy AMERICAN
38 matches
Mail list logo