At 2:42 AM + 7/9/03, Priscilla Oppenheimer wrote:
>Howard C. Berkowitz wrote:
>>
>> At 10:46 PM + 7/8/03, Zsombor Papp wrote:
>> >The LSA will be fragmented at the IP layer.
>>
>> Do you know for certain this is what Cisco's implementation
>> does?
>> The OSPF code is aware of the MTU
Can someone help me ?! I do playing around with different configurations
trying to successful ping the internal interface -172.16.200.1 - of a PIX
from an external Router interface.
ip address outside 192.168.100.2 255.255.255.248
ip address inside 172.16.200.1 255.255.255.0
After a lot o
Hi,
Can we connect 2 ISDN ports back to back for test ? (with out ISDN
simulation device)
Is there any kind cable to do this job?
cheers
Heiman.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72051&t=72051
--
FAQ, list archive
Hi GS,
Does anyone know off hand whether you can authenticate a group on a Cisco
vpn concentrator (3030) with digital certificates and the user with Secure
ID?? So far I can do one or the other as it seems that the although the SDI
server authenticates a user it is configured at group level and s
Does anyone have visio stencils for Cisco 3500 series switches like the
3508's and 3548's, I use to have them but had to reinstall and now that I
have done that Cisco has seemed to remove these products from their site.
Here is where all the other stencils are and there is a 3500 series
stencil but
You can only ping the internal int on the pix if you are sitting on the
inside. You would also need to issue the command "telnet x.x.x.x inside".
You can never cross an interface to get to another interface on a pix for
the purpose of ping or telnet. You must always use the interface closest to
I could not find a doc explaining why a default route learned from BGP is
not redistributed into OSPF.
Any thoughts?
R5#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA
Hi,
I have a question I hope some one help... :)
1. Does the order of entering the commands under the physical and dialer
profile makes any difference.
--
interface BRI0/0
no ip address
encapsulation ppp
no ip route-cache
no ip mroute-cache
dialer
The original question (as I understood) was about a single LSA that is
larger than 1500 bytes (think Type 1 LSA for a router with 200 interfaces).
I can't see how such an LSA could be divided into multiple OSPF messages so
the only logical (implementation independent) solution seems to be to
fr
>hebn wrote:
>>
>> hello,everyone:
>
>>OSPF use raw socket (datagram) to communicate with peers. In
>> general, layer 2 frame has a MTU of 1500 bytes.
>>how does cisco router propagate router-lsa whose size exceed
>> 1500 bytes(more than 122 links in one area)?
>
>Well, I don't have a
I am getting ready to roll out the Cisco VPN client (3.6.4) and looking for
tips on the easiest way to do this. I currently have it on a FTP site and
setup as a self extracting file that extracts to c:\temp and then launches
setup.exe automatically.
Now for the profile I want people to use. I do n
This horse has been beat dead far too many times. The default
route must come from EBGP so the tag field is populated with
meaningful data (last i recall)
I my lab I just know it never works from IBGP>REDIS OSPF
Must be EBGP>OSPF>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&
If you place the profile .pcf files in the same location as setup.exe, in
your temp directory, then setup will automatically install them. If you run
a silent install it makes it really easy.
Doug Korell wrote:
>
> I am getting ready to roll out the Cisco VPN client (3.6.4) and
> looking for tip
Hey Everyone,
We will be moving the mailing list function to a new server. If you are
currently receiving this list via e-mail, you will be affected. This
has been planned for some time now but we need to move faster then I
would like. I just received a bill from our co-location facility for
You can 'push' the .pcf file profile during the install with a
simple batch file, or via the .ini file utility that comes with
the client.
the best way, is setup a vpn package, with silent install. It will
install and reboot the clients.
The group user/name is encrypted in the pcf file, so I dont
Zsombor Papp wrote:
>
> The original question (as I understood) was about a single LSA
> that is
> larger than 1500 bytes (think Type 1 LSA for a router with 200
> interfaces).
> I can't see how such an LSA could be divided into multiple OSPF
> messages so
> the only logical (implementation indepe
I agree about either way of setting up the profile is not secure. My
thinking is if they know the group username and password, they can call up
their buddy and tell them it. But if I never give it to them, then they need
to know a little bit about the client and where that information is kept.
Aut
Got a friend messing with a couple of these, I cant find a lot of info on
these cards really, anyone got a good troubleshooting site?
Brian
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72067&t=72067
--
FAQ, list archives,
3660 & an ls1010...the interfaces on both are t1
thx in advance
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72069&t=72069
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report miscondu
At 05:14 PM 7/9/2003 +, Priscilla Oppenheimer wrote:
>Zsombor Papp wrote:
> >
> > The original question (as I understood) was about a single LSA
> > that is
> > larger than 1500 bytes (think Type 1 LSA for a router with 200
> > interfaces).
> > I can't see how such an LSA could be divided into
For a standard T1:
Cross-over you will need 14 and 25
Straight through T1 you will need 11, 22, 33 and 44
Thanks,
Mario Puras
SoluNet Technical Support
Mailto: [EMAIL PROTECTED]
Direct: (321) 309-1410
888.449.5766 (USA) / 888.SOLUNET (Canada)
>-Original Message-
>From: [EMAIL
I have to recert my CCNP by the 21st of this month. (yeah I know I left
it late, but I was busy upgrading my CSS1 to CCSP).
I notice they have a new test coming out ( 642-891 ) Called Composite
which is based on BSCI and BCMSN, which will also let you recert your
CCNP and CCDP with at the same t
I just did the CCNP recet test two weeks ago and passed with not too much
studying -- used boson test to see my weak areas and just brushed up on
those areas -- hint -- you can use the same study materials you used three
years ago -- nothing has changed.
as to the answer to your questions, my expe
At 12:43 PM + 7/9/03, Zsombor Papp wrote:
>The original question (as I understood) was about a single LSA that is
>larger than 1500 bytes (think Type 1 LSA for a router with 200 interfaces).
>I can't see how such an LSA could be divided into multiple OSPF messages so
>the only logical (implemen
Amazing wrote:
>
> I just did the CCNP recet test two weeks ago and passed with
> not too much
> studying -- used boson test to see my weak areas and just
> brushed up on
> those areas -- hint -- you can use the same study materials you
> used three
> years ago -- nothing has changed.
I wouldn't
Two other problems with Cisco beta exams is that they are often loaded
with errors (meaning you can get an answer right, but not get the
points), and that you don't learn the results for months. In your case,
you'd spend two months not knowing if you're CCNP is valid (I couldn't
handle the pressur
Howard C. Berkowitz wrote:
>
> At 12:43 PM + 7/9/03, Zsombor Papp wrote:
> >The original question (as I understood) was about a single LSA
> that is
> >larger than 1500 bytes (think Type 1 LSA for a router with 200
> interfaces).
> >I can't see how such an LSA could be divided into multiple
>
At 11:07 PM 7/9/2003 +, Howard C. Berkowitz wrote:
>At 12:43 PM + 7/9/03, Zsombor Papp wrote:
> >The original question (as I understood) was about a single LSA that is
> >larger than 1500 bytes (think Type 1 LSA for a router with 200
interfaces).
> >I can't see how such an LSA could be divi
At 11:07 PM 7/9/2003 +, Howard C. Berkowitz wrote:
> >Hello packets. IIRC, about 47 router entries can fit into an OSPF
> >hello packet with a 1500 byte MTU. Consider the timing complexities
Btw, neighbors are identified by their 4-byte router ID, so it would take
more than 350 neighbors to
At 5:40 PM -0700 7/9/03, Zsombor Papp wrote:
>At 11:07 PM 7/9/2003 +, Howard C. Berkowitz wrote:
>>At 12:43 PM + 7/9/03, Zsombor Papp wrote:
>>>The original question (as I understood) was about a single LSA that is
>>>larger than 1500 bytes (think Type 1 LSA for a router with 200
interfaces
Hi..
a basic ISIS question...
I know that by default, an IS is L1-L2, so it can form a L1L2 adjacency with
its neighbors. But what's the benefit of it? and under what kind of
situation in real world people want to configure it this way?
thanks!
Ellie
Message Posted at:
http://www.groupstudy.c
Well I decided I wouldn't push it in such a short timeframe with the one
exam. With work and whatever else probably won't have enough time to
study fully for it. So I will write either all 4 again, or cit/bcran
and then the new Composite once it's out.
Anyone know if the Composite will count towa
Hi all
I am planning to appear for CCSP EXAMS .May I request
people from Mumbai ,India to have off-line discussion
to have joint efforts.This will help us in sharing
idea ,study material etc.Interested people can email
me offline on [EMAIL PROTECTED] .
Thanks in davance .
Piyush
Hi all
I am planning to appear for CCSP EXAMS .May I request
people from Mumbai ,India to have off-line discussion
to have joint efforts.This will help us in sharing
idea ,study material etc.Interested people can email
me offline on [EMAIL PROTECTED] .
Thanks in davance .
Piyush
not possible with ISDN
""H T"" wrote in message
news:[EMAIL PROTECTED]
> Hi,
> Can we connect 2 ISDN ports back to back for test ? (with out ISDN
> simulation device)
> Is there any kind cable to do this job?
>
>
>
> cheers
> Heiman.
Message Posted at:
http://www.groupstudy.com/form/read.php?
I'm thinking for straight through you meant to say:
Straight through T1 you will need 11, 22, 44 and 55
wrote in message
news:[EMAIL PROTECTED]
> For a standard T1:
>
> Cross-over you will need 14 and 25
> Straight through T1 you will need 11, 22, 33 and 44
>
>
>
>
> Thanks,
>
> Mario Puras
> So
Hey.. what command in PIX to do the following
1) copy the current config (not the startup config) to Tftp server ?
2) overwrite the current config from the start up config ? (without
rebooting PIX)
3) copy the config stored in Ftp server to the PIX current config ?
4) copy the config stored in Ft
37 matches
Mail list logo