Re: 2 T1 design question

2000-10-14 Thread Alexander Pozdnjakov
I have two T1 connections. One is a full T1 to UUnet while the other is a 768 KB FR connection to BBN. The UUnet connection is supposed to be the primary while BBN is the secondary. I have two C's from BBN and one from UUnet. What type of routing would best permit this to happen? How can

Re: Reverse Telnet

2000-08-16 Thread Alexander Pozdnjakov
Hi! A quick question in regard to "reverse telnet". [skip] However, when I'm directly connected to the 2511 console port, I can reverse telnet to the other devices just using the "hostname", such as "router1". config t line con transp inp all ___ UPDATED

Re: about pri

2000-08-16 Thread Alexander Pozdnjakov
Hi! You must use Multilink PPP feature of Cisco IOS to bundle both B chanells. --- WBW, xander CCNA, CCNP (RS), CCIE very soon :-) HI guys i have a cisco 3620 in my central office with pri port to connect the several branches, and my branch just have a TA connected with the pc, i want to

Re: baud rate for various kinds of router interfaces?

2000-08-16 Thread Alexander Pozdnjakov
Hi! All of them is the example of physical interface standard and discribed by CCITT. try http://www.ccitt.org hi guys, I have got a question which is as such : what kind of throughput bits/sec can a router with v.35 , x.21 etc. interface take? Any kind of input will be greatly

Re: Terminal server

2000-08-16 Thread Alexander Pozdnjakov
Hi! Do not forget that aux port has different signalling pins than async ports! Can someone tell me whether it's possible to use the aux port connected to the console port of another cisco router? I tried the same conf as if I was using the asyn port but it failed. (transport input all, no

Re: OSPF question - discontiguous areas

2000-08-15 Thread Alexander Pozdnjakov
Hi! Change one of the area number from 2 to something else expect 0. This question came up on another list. I thought I would repeat it here, and see what kind of discussion it engenders. Question: how does one repair a discontiguous OSPF area? e.g.

Re: RSVP

2000-08-15 Thread Alexander Pozdnjakov
Hi! Just ask for it :-) I have some questions about WFQ and RSVP any one can help thanks mohamed shommo -- --- WBW, xander CCNA, CCNP (RS), CCIE very soon :-) ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives,

TRADE: NetworkStudyGuides CCIE login to CertificationZone CCIE

2000-08-15 Thread Alexander Pozdnjakov
Hi! I'm looking for CCIE login trading! --- WBW, xander CCNA, CCNP (RS), CCIE very soon :-) ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and

Re: OSPF Question in Jeff Doyle book.

2000-08-14 Thread Alexander Pozdnjakov
Hi! Non-broadcast Multi Access envirinments do not use nor broadcast not multicast packet delivery method. Multicast and multipoint are the completely different terms! I have a question about OSPF ..in particular a line from the Jeff Doyle Routing TCP/IP Vol 1 book.. On Page 417, 2nd

Re: A boon for Cisco Engineers!

2000-08-01 Thread Alexander Pozdnjakov
Hi! CiscoWorks 2000 "Nasser N Khwaja" [EMAIL PROTECTED] ÓÏÏÂÝÉÌ × ÎÏ×ÏÓÔÑÈ ÓÌÅÄÕÀÝÅÅ:8m3u88$auo$[EMAIL PROTECTED] Hello Everybody, Does anyone know about any software package that monitors a network so that if any router(s) goes down the support Engineer is automatically paged. Please let

--- Not own broadcast

2000-08-01 Thread Alexander Pozdnjakov
Hi! During prep to CCIE geting hard-brain question. 19 (i29s.gif) The node at address 192.168.1.18 sends a packet with the destination address 192.168.1.255. Based on the network shown above, which node or nodes will receive the packet? a) All nodes on all subnetworks b) Only the node

Re: bridging analog phone service with Cisco VoIP

2000-07-24 Thread Alexander Pozdnjakov
Hi! No. There must be ip, fr or atm configured. You can create ip tunnel over x.25... correction for network layout : x25 LLFR x25 POTS1 1750 4500 4500 4500 1750 POTS2 can I configure the voice connection

Re: CIT questions

2000-07-18 Thread Alexander Pozdnjakov
Hi! Dear Friends, Hi! I need your advice on preparing for CIT exam. I have the Laura Chappell and Dan Farkas book, The Sybex Book and the syngress book. I have also downloaded the Boson CIT exam, will they help? Please Advise. Plz also tell me about the exam format Thanks in advance.

Re: CCIE prep lab

2000-07-18 Thread Alexander Pozdnjakov
Hi! I've recently passed my CCIE written exam and would like to take a CCIE prep lab. Anyone have a suggestion? Thanks. Can you please post your braindamp of CCIE R/S exam??? Please!!! And list of prep matherials... -- WBW, xander mailto:[EMAIL PROTECTED] SMS GATE: [EMAIL PROTECTED]