If you do sh ver from enable mode you get :-
PIX_TH_BB# sh ver
PIX Version 4.4(4)
Compiled on Thu 06-Jan-00 16:07 by pixbuild
PIX BIOS (4.0) #0: Tue May 18 16:29:54 PDT 1999
PIX_TH_BB up 104 days 21 hours
Hardware: PIX-515, 64 MB RAM, CPU Pentium 200 MHz
Flash strata @ base 0x300
0: ethernet
Dear Group
A little of topic but I wondering if any of you can answer this for me.
I have two routers in a home lab (2501 & 2503) and was wondering is it
possible to run a cable between the two routers via the Aux port and connect
from one to the other.
Reason for asking is I only have one Conf
Hi Group
I wonder if any body can answer this or point me in the right direction for
me.
I am looking at VLANs and what can be done with them.
I know I can use ISL to link two switches together with even a router in the
middle and have a vlan running from switch to switch. I am also sure that I
Hi group
If you have a pair of PIX in fail-over mode you can run the Fail-over PIX
with a IP address or not.
What are the pros and cons of assigning a IP address to the fail-over? as
apposed to not?
What I thought was that if you run the PIXs in fail-over with IP, they
fail-over in about 15 Sec
Hi all
Passed CID this weekend completing my CCNP & CCDP story.
My thanks for the help given on this list.
Used Cisco press box & on job/lab time to prepare for the exams. Found CID
to have been the hardest of the lot.
What next? Not sure if I should finish the Security exams or move on to the
Hi Group
Been working on a pix and have come across a strange issue.
Have ICMP allowed via the pix, but when a trace route is passed over it, all
host names after the pix are replaced with the final address and name.
So if the destination is 5 hops behind a pix and is called mail1, then on
you
Dear Group
Just to say I passed my CCNA 2.0 this afternoon on the second pass.
Used the Todd Lammle (CCNA 1) books plus documents on the Internet to bring
it up to CCNA 2.0
Would just like to thank all members of this list for their help.
What's Next ?
Regards
Andrew
__
Hi
I am looking at getting IP Multicast working on my Core network and also
access to the MBone.
Can any of you please forward me towards any good books/white papers on how
to do this.
I passed BCMSN so have a fair under standing of the theory but 100% sure on
how to make the connection from Lo
8 matches
Mail list logo