Hi,
Where can I find such tools?
Thanks.
Bulent Sahin
- Özgün Ýleti -
Kimden: "Tony van Ree" <[EMAIL PROTECTED]>
Kime: "Deloso. Elmer G (WPNSTA Yorktown)" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Gönderme tarihi: 24 Ocak 2001 Çarþamba 00:22
If you are using a router to do this, such a access-list will work.
access-list 102 deny tcp any any eq 5050
access-list 102 permit ip any any
int ethernet 0
ip access-group 102 in
Note: I supposed that, users' packets are coming from ethernet 0 interface.
- Özgün Ýleti -
Kimden: "Frank
. Allright
this is what we have. I'm looking for a better software which has some
additional features and a good GUI .(not Cisco Secure ACS )
Even this better software has to get data from the router and the router
has to generate this data. This means "slow down"; No difference.
Bulent Sah
Hi,=20
I want to clear "show buffer" counters, but i couldn't find a command. =
The command "clear counters" doesn't effect "show buffer" output.
Thanks.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and No
Table A-1: System LED Color Description
Off Router is not receiving power.
Blinking green Router is running the ROM monitor. No errors detected.
Solid green Router is operating normally. No errors detected.
Amber Router is receiving power but not functioning properly. Possible
power-on self-t
Hi,
Which ports(TCP, UDP) does ICQ
use?
Thanks.
I have seen that ICQ also uses ports 23647,
13492 and 18838.
-Original Message-From:
Chuck Larrieu <[EMAIL PROTECTED]>To:
Bulent Sahin <[EMAIL PROTECTED]>; [EMAIL PROTECTED] <[EMAIL PROTECTED]>Date:
26 Eylül 2000 Salý 19:04Subject: RE: ICQ
Hi
How can i create a new group on Cisco
Secure ACS?
Thanks,
Hi,
I want to get the log files of IGX switches to process them with a program. I
haven't seen any option in WAN Manager to get the log files and "telnet" is
not a good way. SNMP or TFTP are possible options, but I couldn't find any
documentation. Help!
Thanks
Message Posted at:
http://www.gr
If the bandwith and delay parameters of the links(I assume serial) are same,
check if there are summary-address definitions on serial links(or
auto-summary enabled), because the route x.x.x.x/y is always better then the
route x.x.x.x/z for EIGRP, if y is bigger than z.
If you use PPP on some of th
MRTG free. http://ee-staff.ethz.ch/~oetiker/webtools/mrtg/
Bulent
- Vzg|n ]leti -
Kimden: "Anthony J Crews"
Kime:
Gvnderme tarihi: 18 Nisan 2001 Gar~amba 09:07
Konu: Network analysis of T1 [7:1057]
> I would like to know the best/least expensive software on the market that
> will ana
You can do it by changing the parameters Bandwith, Delay or both, but
changing only one of this parameters is a easier and simplier way. I use
delay, because the delay of a multihop route is the sum of the delays of the
every hop to the route, but the bandwith of a multihop route is the minimum
ba
91251144 IP 10.1.1.1
You may watch the session establishment problems with "debug x25 events"
command on both sides. Look for the originator and the reason code part of
the clear request packet. It will be very useful to determine the problem.
Bulent Sahin.
- Vzg|n ]leti -
Kim
d/doc/pcat/sqasnt.htm
Bulent Sahin
- Vzg|n ]leti -
Kimden: "Sean Young"
Kime:
Gvnderme tarihi: 27 Nisan 2001 Cuma 16:24
Konu: Differences between TACACS+ and Cisco ACS [7:2245]
> Hi Everyone,
>
> The company I am working for is considering purchasing Cisco ACS
> s
14 matches
Mail list logo