Hi Guys,
I have a ATM Internet link and the configuration is present on the physical
interface, no sub-interface exists.
The details for the ATM ckt is as follows:
Hardware is DS3 (45Mbps) port adaptor
Framer is PMC PM7345 S/UNI-PDH, SAR is LSI ATMIZER II
Framing mode: DS3 M23 ADM
and the int
Thanks Guys
For your response. The question which is not clear to me (thats a
fundamental one) is even if the network statement under OSPF includes both
the subnets, is it necessary to form a neighbour that the subnet mask
should be the same on a broadcast medium like ethernet considering the fa
HI Guys
I have an OSPF question andmy network setup is as follows:
R1--Switch--R2
R1 has an ip addres of 10.103.56.97/20 and R2 has an ip address of
10.103.56.1/21. Under OSPF the foll network command is present
network 10.103.56.0 0.0.7.255 area 8.
Both the routers are in the same area.
Thanks Neil,
FOr your response. BTW have u taken ur written and if so how tough it is to
select the right no of answers from the maximum possible options.
THanks
Naresh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=37533&t=37247
---
Hi Gurus,
Need some info about the written exam,
is the written exam like other cisco exams where u cant go back and
i have heard that for multiple questions unlike other cisco exams where they
say choose 3 out of 6, for ccie written they just say select the correct
ones from the option in othe
Hi Dennis,
The site below explains how to implement load sharing using BGP.
Bcos of the very nature of BGP you can have one best route anad hence u can
implement load sharing and not load balancing.
http://www.cisco.com/warp/public/459/40.html
THanks
Naresh
Message Posted at:
http://www.group
6 matches
Mail list logo