How to determine CIR and increase CIR of FR?

Hi.. How to determine the CIR of a frame relay line? Like Result shown below, what is the CIR? How do I increase the CIR? Do we have to contact the Frame relay provider? What is the difference between CIR and EIR?? SIN01#sh int s1/1.19 Serial1/1.19 is up, line protocol is up Hardware i

traffic shaping question [7:1058]

Hi.. 1) Refer to output below. May I know what is mean by target rate 64000. This is a 256K link. Does it mean limit to 25% of bandwidth for access-list 102?? Then what is mean by Byte limit and excess bits?? 2)The second output show queue depth = 3 what is the unit?? 3)Take a look on the acc

how to implement access-list in the way [7:1730]

Hi.. I have a internet gateway router with ethernet ip 200.100.100.101/24 and serial ip unumbered and I have a firewall ip 200.100.100.100/24. I want people from internet cannot ping and telnet to my router via its ethernet IP, so I implement vty access-list as shown below to allow my firewall

how to log on to router if forgot password [7:3558]

Hello.. I lost the record of the all router password including user , enable password, vty, console and etc.. right now how I can log on to the router if I can physically touch it David _ Get Your Private, Free E-mail f

Do you need to save the "set" based config? [7:5688]

Hi.. I have a Cat5500 switch. After I changed a config let say "set vlan 3/5-8 3" then when I do a "sh config" the change already take place. Why I don't need to do a "write". Beside when I do a "sh run" or "sh start" it doesn't work. Why it is different from IOS? What is the different betw

how to add solaris route with this netmask [7:6098]

Hi.. May I know how to add in route entry in solaris with this network "100.100.164.0 255.255.252.0" I use this command "route add -net 100.100.164.0 100.100.164.1" it will add the entry 100.100.164.0/24 not /22 but if I use route add -net 100.100.164.0 255.255.252.0 100.100.164.1 it prompt