>From my point of view, here is what I see:
Hardest ---> Easiest
CIT -> Routing -> Switching -> BCRAN
Good luck
Dvass
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=34847&t=34632
--
FAQ, list archives, and subscription info: h
As Cisco says, 640-025 is the current CID exam.
Good luck pal.
Dvass
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=35728&t=35685
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report mis
Hello Edward,
In case you use Cisco equipment, there is the line configuration command
"absolute-timeout" .
3640_DialUp#conf t
Enter configuration commands, one per line. End with CNTL/Z.
3640_DialUp(config)#line 97 126
3640_DialUp(config-line)#absolute-timeout ?
Absolute timeout interval i
Hi,
WIC 1T works with 3600 series. No question about it...
Probably the NM slot on which you put the WIC is faulty.
Try putting it on a different slot on the same NM.
If it's not working as well, replace the NM.
Dvass
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32279&t=32
Hello,
You'll find your answers under :
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/np1_r/1rprt1/1rrip.htm#xtocid1254415
Dvass
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32416&t=32311
--
FAQ, l
WIC 1T supports up to 2048Kit BW (E1)...
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32418&t=32258
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure viol
There is no way you can spoof a serial line to up/up state via
configuration...
Here is what I did:
!
interface Serial1
ip address 10.1.1.1 255.255.255.0
loopback
no keepalive
!
Still...
R2#sh int ser 1
Serial1 is down, line protocol is down
Hardware is PQUICC Serial
Internet address i
Guess I hit the exception!!
I tested in on a MC3810 running 12.1(9)!
Under the site you gave me it says that the command "loopback" is
modified for that router!!!
I'm glad we solved it now. ;-)
Best regards
Dvass
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32424&t=32410
You should configure in the global configuration of the 7204:
7204(config)#ip wccp web-cache
You should also redirect http traffic from the intresting interfaces of the
7204 to the cache engine.
conf t
interface serial x
ip wccp web-cache redirect out
Cache engine should be configured like thi
Juan,
I bet you've waited a long time to get the CCIE written.
Why don't you wait a few months more and announce your number...
Be patient CCIE number worths it..
Dvass
p.s. we're all Cisco maniacs! ;)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41008&t=40988
Ranma,
If you want to learn how to play the guitar, get yourself a guitar...
www.cisco.com is the answer
Dvass
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41283&t=41282
--
FAQ, list archives, and subscription info: http://ww
Jeremy,
If you enter "no login" under vty 0 4, then you'll get into
the router!
"login" means that the router prompts " Password:".
"no login" instructs the router to bypass that, giving
you access immediately.
Dvass
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41301&t=412
Team,
I was wondering
Is it possible to make a router respond to an access-list blocking,
using a custom-made user defined phrase?
For example, if we deny telnet from a host we need to reply to
him "Access-list blocks incoming telnet..."
?
Message Posted at:
http://www.groups
I agree with you Chuck. It's very unsecure indeed...
However, consider it as one of the certifications' riddle...
Too theoretic, but must be solved... It has a solution, and it
is ROUTER oriented. No IDS or CSPM included...
In case you come up with something let me know...
Thanx
Dvass
Messag
Henrique,
Have you checked the default gateways of the workstations?
Dvass
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42321&t=42318
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Repo
Garbage indicate difference in connection speed
Dvass
416South wrote:
>
>
> I'm able to get this modem to dial into the router just fine.
> Problem is still driving me nuts is that all the characters are
> showing up as garbage (ΓΈ~ using Hyperterm and have tryed with other
programs as well
I've faced a similar problem in the past
If you think that the configs are correct, try to upgrade the IOS on
the 801.
My problem was solved immediately.
Dvass
Hans Schimek wrote:
>
> I am trying to implement a dial-up connection to a remote site (
> Cisco2611 dials to Cisco 801).
> I am
Same format, same questions...
Dvass
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=26370&t=26361
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violati
18 matches
Mail list logo