please contact me
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=31133t=31133
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
When will the CCIE Written exam 350-001 change into new format?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=21639t=21639
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
what does this messgae mean?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15021t=15021
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
Eric ding wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
such as below:
routerA(fas0)(fas0)routerB
routerA#
interface fas0
ip add 1.1.1.1 255.255.255.0
router ei 1
net 1.0.0.0
no au
routerB#
interface fas0
ip add 1.1.1.2 255.255.255.0
ip add
such as below:
routerA(fas0)(fas0)routerB
routerA#
interface fas0
ip add 1.1.1.1 255.255.255.0
router ei 1
net 1.0.0.0
no au
routerB#
interface fas0
ip add 1.1.1.2 255.255.255.0
ip add 1.1.2.2 255.255.255.0
router ei 1
net 1.0.0.0
no au
from the debug ip ei output ,i saw that
such as below:
routerA(fas0)(fas0)routerB
routerA#
interface fas0
ip add 1.1.1.1 255.255.255.0
router ei 1
net 1.0.0.0
no au
routerB#
interface fas0
ip add 1.1.1.2 255.255.255.0
ip add 1.1.2.2 255.255.255.0
router ei 1
net 1.0.0.0
no au
from the debug ip ei output ,i saw that routerB
i want to implement async-ppp callback between an access server and a
pc,also i read the following url:
http://www.cisco.com/warp/customer/793/access_dial/async_ppp.html
and apple it to my access router and laptop.
i doesn't work!
the debug output is as follow:
..
(omit)
..
(o02:01:03:
does as5300 support the e1-r2 and e1-pri both?
i mean 1 controller for e1-r2 and the other for e1-pri at the same time!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=7030t=7030
--
FAQ, list archives, and subscription info:
i have two routers run igrp 1,the topology is as follow:
node(10.2.2.1)eth0(10.2.2.254)-routerA-serial0(10.1.1.254)-fram-rela
yserial0(10.1.1.1)-routerB-eth0(10.3.3.254)---node(10.3.3.1)
both routers run igrp 1
network 10.0.0.0
sh ip route from routerB
i saw
no ip route for 10.0.0.0
ginal Message -
From: robert lowery [EMAIL PROTECTED]
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED]; Eric ding [EMAIL PROTECTED]
Sent: Wednesday, March 07, 2001 8:58 AM
Subject: Re: strange question about dce setting?
Have you tried to use a special crossover cable... that is db60 bo
in case we have two layer3 networks,tcp/ip and ipx networks.
now we want to share files between them!such as the user in ipx network
can get the resource in tcp/ip networks.
how should i aplly it!
any suggestion are appreciated!
_
FAQ, list archives,
two 2500 routers,routerA and routerB, back-to-back connection .both of
them use serial 0,when i set routerA's serial for dce,i got the output
below:
routerA(config-if)#dce-terminal-timing-enable
%not allowed on dte interface
but if i use the command below:
routerA(config-if)#no
12 matches
Mail list logo