try "debug serial interface" command
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10602&t=10598
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violatio
set system name is the command to assign the hostname name.
set password is the command to assign the pasword. to assign the password
to go into enable mode use the set enablepass command.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10477&t=10473
-
configure access list on your router in addition to setting up port security.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9568&t=9556
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Repor
Looback interface is a logical interface on your router such that when your
router interface(s) goes down your loopback interface still stays up up. the
subnet mask normally assigned is 255.255.255.0 not 255.255.255.255 and this
is done so that only one Ip address can be assigned to the loobak int
think about conguring virtual link(s) on your backbone router with an area
border router that has an interface in area zero.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9272&t=9268
--
FAQ, list archives, and subscription info:
erasing flash doesn't normally get rid of the image file completely. try
using the "squeeze filesystem:" command.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9142&t=9114
--
FAQ, list archives, and subscription info: http://www.
It looks like you are also having issues at your end and your router might
be part of the problem since you don't even have your serial interface up.
reboot the router. also check on your csu and find out if the send and
receive lights are green .also make sure there is no bipolar violation with
t
7 matches
Mail list logo
