Hello friends!
I currently have CCNP certification and looking forward to get CCIE in the
next months.
I'd love to create a study group in Madrid, Spain. Or, at least in Spain :
-).
I have a lab, with Cat5k, several 2500, MC3810, etc, accesible via telnet.
Anybody here interested?
Best
Maybe that message is coming from the Boot, which is older it two of the
routers. I see it ocassionally, but it doesn't harm, since as soon as
correct IOS loads, later on the boot process, the sentence will be
understood.
What I don't understand is the reason of the reloading... What can you
Are you still receiving it? (debug ip rip...)? And are you sure you aren't
receiving any other default route via other -better admin distance-
routing protocol? What do you see in a debug ip routing?
Vicuna, Mark
Enviado por: [EMAIL PROTECTED]
13/01/2003 09:13
Por favor, responda a
Hello!
And there are some issues with several protocols, as Marc points out. In
FTP, for example, possibly the new packet will be larger than original one.
(IP Addresses are codified in the data payload as text). So, it's possible
the router has to fragment the packet. And that's not a simple
Hi thomas;
AFAIK Dot1q is only supported in (some) FastEthernet interfaces, and 2501
has only Ethernet, so it isn't supported.
Thomas Muller
Enviado por: [EMAIL PROTECTED]
09/01/2003 16:21
Por favor, responda a Thomas Muller
Para: [EMAIL PROTECTED]
cc:
Asunto:
What are you looking for? Actual online equipment rental or docs with
labs?
Francisco Sedano
Informatica Pronet
CCIE student :-)
reddyred
Enviado por: [EMAIL PROTECTED]
09/01/2003 16:21
Por favor, responda a reddyred
Para: [EMAIL PROTECTED]
cc:
Asunto:
I've configured dot1q on 1721s... I think any recent Cisco with
FastEthernet will support it.
Francisco Sedano
Informatica Pronet
CCIE Student :-)
The Long and Winding Road
Enviado por: [EMAIL PROTECTED]
09/01/2003 16:38
Por favor, responda a The Long and Winding Road
Para:
Could you send it to me? I could setup a ftp server open to anybody to
request them (and all docs which we find useful).
Francisco Sedano
Informatica Pronet
CCIE Student :-)
Howard C. Berkowitz
Enviado por: [EMAIL PROTECTED]
09/01/2003 17:39
Por favor, responda a Howard C. Berkowitz
Surely there are a lot of solutions; which I'd do is:
Define a different VLAN for each floor.
Connect the catalysts in each floor with trunk interfaces (802.1q)
Connect a Fast or Giga ethernet interface from a router to one of the
switches. You must setup that interface (both on the router an on
cna be run
on a 2610 with 10BT ethernet.
Francisco Sedano/Inf-Pronet wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi thomas;
AFAIK Dot1q is only supported in (some) FastEthernet interfaces, and
2501
has only Ethernet, so it isn't supported.
Thomas Muller
Env
Maybe Show interface status...
ELX_SW_1#sh int status
PortName Status Vlan Duplex Speed Type
Fa0/1 connectedtrunkhalf100
10/100BaseTX
Fa0/2 notconnect 99 auto auto
10/100BaseTX
Fa0/3
]
cc:
Asunto: Re: Cisco 2501 dot1q encapsulation ? [7:60699]
I've just configured dot1q on a 4500 with NP6E and IOS 12.2, I haven't
tested whether its working.
rgds
Marc
Francisco Sedano/Inf-Pronet wrote:
4000? Could you expand on it? Which model/IOS? I have a plain 4000 with
12.1
4000? Could you expand on it? Which model/IOS? I have a plain 4000 with
12.1(11) and it doesn't support it..
cebuano
Enviado por: [EMAIL PROTECTED]
09/01/2003 22:04
Por favor, responda a cebuano
Para: [EMAIL PROTECTED]
cc:
Asunto: RE: Cisco 2501 dot1q
Maybe the servers you are telnetting to, are trying to resolve the incoming
IP address to a name, and are waiting for the DNS to respond; try to verify
that particular UNIX boxes have correct DNS settings.
One hint - By default EIGRP will use a MAX of 50% of the CONFIGURED
bandwidth of the interface (via Bandw command).
You can change this behavior, however.
Maybe booting from TFTP or trying a smaller 11.3 IOS (less features)
John
Brandis
cc:
16 matches
Mail list logo