to talk to our network guy to see if he can make the Linux box do the
same job so I can take my Cisco router back home.
Thanks to all for your help.
Frank
Priscilla Oppenheimer wrote:
Frank H wrote:
Proper network design?
I have a few questions for the group that maybe someone can
No subinterfaces are used. Here's the Cisco 2514 config:
Router#show startup-config
Using 940 out of 32762 bytes
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
ip subnet-zero
!
interface Ethernet0
description outside
Now I understand. I read a few articles on the Cisco site after searching
for the term router on a stick and found a good explanation. Thanks for
your help.
Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=49558t=49536
--
Yes, I am using a 2514. It does have 2 10BaseT interfaces (through AUI
adapters). I am not using subinterfaces. Both ports are used - one port goes
to the Internet (for hosts that require Internet access) and the other
connects directly to the 24 port hub which resides within the internal LAN.
Copied directly from Cisco:
On these platforms, the Cisco IOS software image is actually running
directly from the Flash memory (flash in read-only mode). Therefore, you
cannot copy the Cisco IOS software image from the TFTP server to the Flash
if you are in user privileged EXEC mode (router#).
No, just one IP address on each interface. Check my earlier post for the
full configuration.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=49578t=49536
--
FAQ, list archives, and subscription info:
The router on a stick effect comes from this:
ip route 192.168.2.0 255.255.255.0 192.168.0.100
All traffic destined to any network not on 192.168.0.0 goes to the gateway
(192.168.0.1) on interface ethernet 1. The router then re-routes 192.168.2.0
traffic back on the 192.168.0.0 network to
If you want a quick test to see if the earth is good or not, your voltmeter
will do (on AC mode). Just stick one lead into the live socket and the other
into the ground socket. If it reads the same as when measured between live
and neutral, then your ground is good. Alternatively, if you measure
8 matches
Mail list logo
