cat5500 with no modules - what to buy for ccie study purpose [7:5885]

Hi group, we got a 5500 with no modules here and we would like to integrate this sweet thing in our ccie practice lab. from what i know, we need something ISL capable. which module(s) do you recommend (prefer cheapest solution) to get some practice with ccie lab like switch configs? what about a

Routing TCP/IP Vol. II by Doyle - any reviews ? [7:1688]

published april 15. i found the first volume to be excellent but what about the second? is the bgp part as good as halabis 2nd edition? thanks, gabriel Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=1688t=1688 -- FAQ, list

3DES for Cisco17xx ?

Under Table 3: Platform - 1700 in this document: http://www.cisco.com/warp/public/cc/pd/iosw/iore/iomjre121/prodlit/1064_pp.ht m there are several IPSec 3DES images listed, which are not available in the download section:

IPSec Cisco to Linux (with NAT)

Hi there, i am looking for config samples for an IPSec setup between a cisco = (1720) router and a linux box with NAT enabled on both devices.=20 any advice is welcome, gabriel _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html

IS-IS, DLSw, IPX

[ Part 1, Text/PLAIN (charset: ISO-8859-1 "Latin 1") 12 lines. ] [ Unable to print this part. ] [ The following text is in the "iso-8859-1" character set. ] [ Your display is set for the "US-ASCII" character set. ] [ Some characters may be displayed incorrectly. ] hi

Fw: CCNP

Remi this sounds strange, please contact [EMAIL PROTECTED] I just received my CCNP welcome kit, containing a BMW Z3, a Cat 5500 with ATM stuff, 3 green CCNP baloons, CCNP crocodile leather boots and a buggy Lucent router. Unfortunately i could not find the certificate, maybe its in the glove

passed CIT

Hi group, i am happy to announce that i have passed the CIT today and finally got my CCNP. The CIT covered Troubleshooting models, Cat 5k VLANs, TCP/IP, Novell (quite a lot of questions), Token Ring, ISDN, FR and Appletalk (very few questions), CCO related stuff. Knowing the various shows and

show ip traffic output

Hi group The following is a show ip traffic output from a Cat 2900XL: Rcvd: 18668088 total, 17981099 local destination 0 format errors, 0 checksum errors, 0 bad hop count 0 unknown protocol, 686989 not a gateway 0 security failures, 0 bad options, 0 with options Any

Re: BGP community tagging

Suaveguru, The community attribute is a way to group destinations in a certain community and apply routing decisions (accept, prefer, redistribute, etc.) according to those communities. Please read the BGP case studies section 2 example: http://www.cisco.com/warp/public/459/14.html gabriel

CIT: Appletalk

Hi group, i would appreciate if someone could roughly estimate the amount and depth of Appletalk knowledge one has to have for the CIT test. Thanks in advance, gabriel _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html

Re: access-list for DDOS attack

first parameter (2 Mbps): average rate - long term average transmission rate 2nd parameter (512 Kbps): normal burst size - determines how large traffic bursts can be before SOME traffic exceeds the rate limit 3rd parameter (786 Kbps): excess burst size - determines how large traffic burst can

BCRAN passed

Yes!!! Compared to Routing and Switching i found this exam fairly easy. There were like 20 choose-IOS-command-from-list questions. The following subjects were covered: - Frame Relay - X25 - AAA/Security - ISDN - Dialup, Modem Config - Router and Connection Deployment - PPP - NAT I took the

Re: !H

A !H indicates that the router at that hop doesn't know anything about the target address; the packet comes back to the source with a message saying "No Forwarding Address". gabriel - Original Message - From: "Jason yee" [EMAIL PROTECTED] To: "John Huston" [EMAIL PROTECTED]; [EMAIL

compression 800/1720/2620

Hi group Got a question regarding compression: Can a Cisco 800, 1720 or 2620 (without AIM) provide ppp (payload)compression for a 2mbit serial line? I dont know if the processor is able to handle this... I would appreciate answers from the practical viewpoint. thanks in advance, Gabriel

configure switching mode on cat 2900XL ?

Hi group, i checked the CCO but found nothing on this subject. Is there an IOS command to configure a 2924XL switch to use cut-through/store-and-forward/etc. switching? thanks in advance, Gabriel _ FAQ, list archives, and subscription info:

Re: Switching 2.0 passed

Read the CCO case studies for BGP, also Halabis book would be a nice addition. Combined with the ACRC material you will pass the test. Know the IOS commands and in which config mode they should be typed in. BTW i am preparing for the switching 2.0 test. I summarized the following chapters from

Re: dynamic vlan membership

the vmps database is a simple text file, which the vmps server downloads to decide whether the devices are authorized to join a specific VLAN. here is a sample database: !part 1: global settings vmps domain testvtp vmps mode open (no entry for MAC-assign port to fallback VLAN) vmps fallback

routing 2.0 passed

Hi group! I passed the Routing 2.0 exam today (747/1000). Thanks to everyone contributing to this mailing list. This is what i used to prepare for this exam: - hands-on with a 3640 and two 2500 series routers - ACRC by Chappel - Internet Routing Architectures by Halabi - from the CCO: Config

books for BCMSN

Hi group! Has anyone read both the BCMSN book by Cisco Press and McGraw-Hill and can comment on these? after reading the amazon reviews i still dont know which one to buy... thanks in advance /gabriel **NOTE: New CCNA/CCDA List has been formed. For more information go to

Software release confusion

Please could someone clarify the difference between IOS "T" and non-"T" releases ? Thanks in advance, /gabriel ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report

frame relay in BSCN?

asa part of many ospf sample configurationsframe relay is used.is a detailed knowledge of frame relay required for BSCN or are the basicssufficient? thanks for any input /gabriel

BGP/OSPF issue

Hi folks, we got a problem involving BGP and OSPF here. Lets say we are an ISP (AS 1) with two routers (Router1, Router2)in different cities. They are both running OSPF (and IBGP) to exchange intra-AS routing information. Router2 is connected via BGP to an upstream provider (AS 2). Router1

ccnp 2.0 prep - irc channel

Hello, is there any serious interest in an irc channel dedicated to those who study for their ccnp 2.0? I am taking BSCN in 2 weeks or so... /Gabriel

vpdn enable on 3640 ?

but couldnt find any l2tpvpdn (we need both running on this machine) feature for this platform. TIA, Gabriel Nickel

BSCN

Hi! I am planing to take the new BSCN exam. Does it make sense tolearn"Configuring Dial Up Connectivity" and "Integrating Nonrouted Services" (ACRC objectives) although these objectives are not explicitly mentioned in the official course outline? Is the understanding of the IOS 12.1 BGP

Re: A little unsure...

- Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, May 18, 2000 8:31 PM Subject: A little unsure... Hey Group, This may take a little space so if you don't have much time just close it out. I am writing the CCNA in 4 days. My question is on the