If the CPU usage is 70%-75% for more than 5 minutes.
Its a considerable issue.
Regards
jagan
CCNP, MCSE+I,CLP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=26816&t=26739
--
FAQ, list archives, and subscription info: http://w
For dial-out from any of the workstation (windows 95&98 and NT)
using modem in Cisco Ras you can get software from tacticalsoftware.com
For dial-in use Radius server and IAS service in Windows 2000 Server.
This radius server in Windows 2000 uses native user domain login database.
regards
jagan
no need
regards
jagan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28145&t=28057
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
Dear All
I am currently involved in providing intranet solution to my client. The
situation is like this, 40 remote locations want to connect to Head Office.
Bandwidth required is 64 Kbps.
Initially ISDN is the preferred choice but client prefers permanent online
solutions.
One Telco service pr
Thank You Mr.Chris White and others
regards
jagan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=29042&t=28655
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisc
jumpers in the router can be set so that console speed goes default to 9600.
just follow this link
http://www.cisco.com/warp/public/701/59.html#conspeed
regards
jagan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32779&t=32673
-
Hello Group
One of my customers need a Management software.
The management software should mail / page / sms network admin of
CISCO switch port status UP / Down and switch down status.
Can any body advise me a good cheap commercial SNMP management software
with these features.
Thanks You in a
hi all
can anybody help me.
i have a catalyst 5505 connected to a 2610 fastethernet
interface. vlans are configured in the catalyst and are trunked
to the fa interface.
in the fa interface subinterfaces encapsulation for vlans are
created in the router.
but still router does not connect to th
Hai all
Does anybody can help me.
Can a 3640 router with 16 port NM analog modem
can support for both incoming and outgoing calls.
I am sure that it supports incoming calls.
I am not sure about the out going calls from 3640.
The situation is like this :
NT server at the HQ should call remote
Thank you Chris Cell.
The situation is like this:
1.
Windows NT server >> Cisco 3640 >> Remote Site Windows 98 PC
dialout 16 port NM-Analog RAS
2.
Windows NT server << Cisco 3640 << Remote Site Windows 98 PC
dialout 16 port NM-Analog RAS
Are thes
just telnet to port 192.168.190.25 2001 for async 1
port 192.168.190.25 2002 for async 2
and so on
regards
jagan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21098&t=21056
--
FAQ, list archives, and subscr
Hi Friends
In my mc3810 router I changed config-register value to some thing.
After rebooting, in the hyper terminal console I did not get even a single
character. Then tried to find the baud rate. Its 1200.
But after setting to this baud rate 1200 I can see only junk characters in
the console.
Hi
To get a reply from outside users PIX must include
conduit permit icmp echo
conduit permit icmp echo-reply
regards
jagan CCNP,CCNA,CCDA,MCNS,MCSE+I,CLP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=50509&t=50449
--
FAQ
Hi Raj
I would like to know what books you use to prepare for new CCIE R&S.
thanks & regards
jagan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51288&t=51130
--
FAQ, list archives, and subscription info: http://www.groupstudy.
Hi Leo
Use no ip proxy-arp in the Cisco 1720 routers ethernet interfaces.
And try is that fine.
thanks & regards
jagan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51423&t=51422
--
FAQ, list archives, and subscription info:
Hi Richard
I too tried this. No results.
But when I applied acl on the outside interface and tried to do port
scanning, logs showed denied access for a list of ports.
Is this correct procedure to identify port scans on PIX.
If this is not the correct procedure let me know how to identify port s
Hi Maximus
I am using 6509 Sup2, MSFC2 and native IOS. Condition is the same.
If I pull the active sup it takes 2 minutes to reboot.
And all the blades also reboot.
Larry
Is this the usual thing.
Pls let me know this is the type of redundancy provided in Cat 6509.
thanks
jagan krishnaraj
Hi
I hope this would help you.
http://www.cisco.com/warp/public/701/59.html#console
good luck
jagan krishnaraj
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54687&t=54632
--
FAQ, list archives, and subscription in
18 matches
Mail list logo