Has anyone purchased their workbook? Is it any good?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6698&t=6698
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondi
Does anyone know if you can use the ports of a supervisor engine (which ever
model) for trunking?
Or do you always need to use a port from the chasis...Assuming you have no
rsm.
Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9902&t=9902
-
Congrats!
What did you do the last couple of months? Practice speed? Or maybe
practice the many "little" things in IOS?
Thanks!
I too long for a good night sleep
- Original Message -
From: "Chuck Church"
To: ;
Sent: Wednesday, February 13, 2002 12:43 AM
Subject: Whew! CCIE 877
Chuck,
I was just going over the steps laid out in caslow's book, do you think the
step 1, step 2, step 3 approach is better than the layered approach - layer
2, layer 3, access-list, etc.
Thanks.
- Original Message -
From: "Joe Morabito"
To: "Chuck Church&q
6) the crossing guard got a virus and is out sick today, now the packets
don't know where to go
5) someone accidentally unplugged the internet
4) bill g$tes tried to upgrade the internet and it blue screened on him
o.k. I am out of ideas...
- Original Message -
From: "Chuck"
To:
S
For deleting sub interfaces, you need to reload, but for nat translations
use:
clear ip nat trans *
-Joe
- Original Message -
From: "s vermill"
To:
Sent: Monday, March 11, 2002 7:41 PM
Subject: RE: Static NAT entries timeout value?? [7:37910]
> If you can reload the router I would
Yup, I had the same problem, you must install service pack 2 for win 2k. I
found the bug on Microsofts web site.
>
>
> Joe Morabito
>
> mailto:[EMAIL PROTECTED]
>
>
> - Original Message -
> From: "Circusnuts"
> To:
> Sent: Friday, Jul
How can you apply an access list to a serial interface to block all internet
traffic without disabling the inside people from getting out?
I have a 1720 with the serial deny ip any any and the ethernet uses an
inside
addressing scheme with nat to get to the outside.
But when I apply the deny ip
Wondering if anyone can help...
Here is the scenario:
(untrusted - DMZ) WIN2K -> PIX --> (trusted - internal WIN2K)
I plan on setting up a Win2K IPSec tunnel between the two servers. Is there
anything special that needs to be configured on the Pix if it will only be
passing the traf
If you have a switch that has 2 vlans (vlan1 and vlan2) using the same
physical connection to the rest of the network, what happens to vlan1 if
vlan2 is suffering from a broadcast storm, since both vlans traverse the
same physical wire?
Message Posted at:
http://www.groupstudy.com/form/read.ph
solution for part A:
Lock the box, send it to your friend. Send the key as a separate delivery.
In essence there are two deliveries made.
- Original Message -
From: "Craig Columbus"
To:
Sent: Saturday, April 06, 2002 12:58 AM
Subject: Re: Puzzles -> WAS RE: My interview story [7:405
Hi all. I have a real world problem and would like some thoughts, here it
goes.
Client has a central site with 7 remote locations. Central site has a 6513
with MSFC2, all sites have T1 in. Eigrp is used between sites and is fine.
At the central site lies an AS/400 that all remote sites connect
I was just wonderingOur company is close to becoming a Premier Partner.
I
know there are benefits like you get listed on their partner site and you get
discounts from Tech Data and Ingram, but discounts to what level? 5, 10, 20
points?
Also, I heard a rumor (not from anyone on this list) th
13 matches
Mail list logo
