For a complete list of every module and it's requirements, you can find out
at
http://www.cisco.com/go/modules
Every module is listed under 'solution finder' and it contains hardware &
software requirements for each module.
-Original Message-
From: Kevin Wigle [mailto:[EMAIL PROTECTED]]
http://www.cisco.com/offer/pixfamily/V591-1008Z
Take a look at this config and see if it work for you:
http://www.cisco.com/warp/public/131/7.html
-Original Message-
From: Al Smith [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 15, 2001 8:57 PM
To: [EMAIL PROTECTED]
Subject: How to Multiplex 3 T1s [7:4625]
Colleagues,
I am currently
I had a similar problem, and tac concluded that it was a bad motherboard.
After it got replaced, the router has been running great.
-Original Message-
From: cisco [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 19, 2001 3:16 AM
To: [EMAIL PROTECTED]
Subject: cisco 3660 [7:9026]
hi,
i hav
Under the voice-port configuration, change the wait-wink timing with the
timing wait-wink command. What is probably happening, is that the router
isn't waiting long enough for a response to come back from the PBX. This
will give the PBX time to respond to the routers reqest for an open DS0.
My
If you're
Cisco-certified, go to the URL listed here, fill out a short survey, and tell Cisco what you think about
its career certification program.
http://www.cisco.com/warp/public/10/wwtraining/jts_survey.html
Title: RE: t1/e1
I believe that the part number is WIC-1DSU-T1. But try this link and look under useful tools, you will find a solution finder that will list the modules and their requirements.
http://www.cisco.com/go/module
Jon Wagner
CCNA
-Original Message-
From: [EMAIL
I believe that this link will explain everything about the Catalyst 4006
power system. It looks like you need at least 2 power supplies at minimum.
We have been running a 4006 for 2 years with 2 power supplies. So far we
haven't had any problems with them.
http://www.cisco.com/univercd/cc/td/do
30% seems about right. For the true CPU info check out the following links:
For the Catalyst 4000 series:
http://www.cisco.com/warp/public/473/82.html
For the Catalyst 2900XL/3500XL series:
http://www.cisco.com/warp/public/473/19.html
-Original Message-
From: Burgin Kozak [mailto:[EMA
It is normal to have that rate of utilization. This article explains it
all.
http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note0918
6a0080094e78.shtml
-Original Message-
From: [EMAIL PROTECTED] [mailto:simonkc@;netsol.co.in]
Sent: Friday, November 15, 2002 8:51 AM
T
10 matches
Mail list logo
