hem there. (i have
> not been there lately, don't blame me if it is changed).
>
> HTH,
> Murali
>
>
> -Original Message-
> From: Justin Vo [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, July 23, 2003 4:06 PM
> To: [EMAIL PROTECTED]
> Subject: certificat
hem there. (i have
> not been there lately, don't blame me if it is changed).
>
> HTH,
> Murali
>
>
> -Original Message-
> From: Justin Vo [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, July 23, 2003 4:06 PM
> To: [EMAIL PROTECTED]
> Subject: certificat
good.
Much appreciate.
Justin Vo
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72786&t=72786
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report miscon
Hi all,
I need to verify to see if the WAN connection is somewhat "full-duplex" ?
another word, for a 64kbps WAN connection, do I have 64K incoming and
another 64 K outgoing or the total of incoming and outgoing is 64 Kbps ?
Much thanks
Justin Vo
[EMAIL PROTECTED]
Network Adm
hi,
You should set the switch port to a fix speed that the hub can take. If the
hub is only a 10Mb hub then set the switch port to 10Mb half duplex. This
will eliminate some potential problem.
Regards,
Justin Vo
""Vlade"" wrote in message
[EMAIL PROTECTED]">news:[
affic can occuppy
the link is 64 Kbps regardless of incoming or outgoing traffic or 64 Kbps
incoming and 64 Kbps outgoing.
>From what you're saying, it will be 64 Kbps incoming and 64 outgoing right ?
Thanks
Justin Vo
""Brian"" wrote in message
[EMAIL PROTECTED]"
MRTG).
Thanks
Justin Vo
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8301&t=8301
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi all,
Has anyone used this product yet ? is it worth the investment and the
virtual routers allowed to do all the functions within the CCNP
certification.
Thanks
Justin
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6868&t=6868
an explaination ?
Thanks again for all the suggestion.
Justin Vo
""David Armstrong"" <[EMAIL PROTECTED]> wrote in message
8up6vk$9i$[EMAIL PROTECTED]">news:8up6vk$9i$[EMAIL PROTECTED]...
> As Winston requested we need debug ppp authentication and a config from
Hi,
My router keep rejecting ISDN calls even though I can dial out alright. It's
a Cisco2500 series with an BRI0 interface.
This is my deb isdn q931. The configuration of my interface is also down
below.
*
Log Buffer (4096 bytes):
K, OK, I admit it! _I_ was the one who left it
running.
> :)
>
> Rodgers Moore
>
> ""Justin Vo"" <[EMAIL PROTECTED]> wrote in message
> 8qe9no$nmv$[EMAIL PROTECTED]">news:8qe9no$nmv$[EMAIL PROTECTED]...
> > Hi,
> >
> > I'm having troub
when I'm pinging the
f0/0 of the router, I'm getting the same response as pinging a host on the
same network.
I already make sure fast switching is enable (default anyway) and the two
routers are 2620 and 3620 with very low utilisation.
Any suggestions ?
Thanks
Justin Vo
[EMAIL PROTECTED
Hi all,
I'm just about to implement the dual ip address on a single Ethernet
interface. Has anyone encounter any problems regarding this setup ? or any
potential flaws against this.
Any comments are appreciated.
Kind regards,
Justin Vo
[EMAIL PROT
Justin Vo <[EMAIL PROTECTED]> wrote in message news:...
> Hi,
>
> I managed to capture the log when my frame relay connection bouncing but
yet
> I'm unable to interpret this information. Can someone help to determine if
> it's my router or my telco that's c
14 matches
Mail list logo
