This is the extract from a show log
Feb 26 03:37:28: %BGP-3-NOTIFICATION: received from neighbor 203.162.129.39
4/0 (hold time expired) 0 bytes
Feb 26 03:37:28: %BGP-5-ADJCHANGE: neighbor 203.162.129.39 Down BGP
Notification received
Feb 26 03:46:44: %BGP-5-ADJCHANGE: neighbor 203.162.129.39 Up
Hi Fred
Thanks for your reply.
I am trying to find out what causes the peer to lose connection. By looking
at the log,I only know that it was down for 9 mins. No other information is
given in the log.
I know that the notifications message itself has some kind of error code and
sub code that will
Can someone tell me what is the function of the protocol field in the IP
header.
I get a little confused after reading from some many sources.
Regards
kws
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65718&t=65718
--
FAQ, li
Dear all
I have a little confusion here
Layer 3 switching is hardware based routing.
If this is correct, does it means that switching path in a router like
netflow and distributed switching is the same as L3 switching
Thanks
KWS
Message Posted at:
http://www.groupstudy.com/form/read.php?f=
Can someone tell me what is the function of the protocol field in the IP
header.
I get a little confused after reading from some many sources.
Regards
kws
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66008&t=65718
--
FAQ, lis
Dear all
I am reading RFC760 (IP protocol) and have the following questions.
IHL : 4 bits
Internet header length is the length of the internet header in 32 bits words
Question: what do u mean by the 4 bits and 32 bits words
Total length :16 bits
Total length is the length of the IP packets i
Hi All
My understanding of ping is that it uses icmp
however, a frend of mine told me that in a ping flood test,ping uses udp
because there is no need for acknowledgment
My understanding is icmp falls under the internetwork layer in DOD model and
so when a ping command is executed,instead of us
Dear all
What is the benefits of receiving the following BGP routes
1. Full routes
2. Partial routes
3. No routes
Regards, kws
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71442&t=71442
--
FAQ, list archives, and subscription
Hi
I want to get started with security and i need some views regarding
SCNP,Security Certified Network Professional. This is the first time, I
heard about this certification.
I wanted to go for the CISSP but my current working experience does not
allow me to even sit for the papers.
Guys,tell me
yes u are right
is 70 %birdy wrote:
>
> Hi
>
> Does cisco recommends that if the WAN utilisation is above 70 %
> ,it will
> cause performance degradation ? I think i have read it
> somewhere in one of
> the ciscopress book. Can someone out there verify this for me ?
>
> Thanks
>
>
Me
Can anyone tell me what is the difference between
IP default-network and IP default-gateway
Regards
kws
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49619&t=49619
--
FAQ, list archives, and subscription info: http://www.groups
Can anyone tell me ...
Based on the below details, the total memory is 64Mb
what does both 49152K and 16384K indicate ?
*cisco 2610 (MPC860) processor (revision 0x203) with
49152K/16384K bytes of memory. *
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49988&t=49988
--
wesley
so is the total memory 64M or 48M ?
thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49991&t=49988
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisc
This URL may be useful to you
http://www.cisco.com/warp/public/471/13.html
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=50516&t=50512
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Re
Dear All
I have a 2501 and 2505 and I am trying to set up a homelab..These 2 routers
come with a cable which is a DB60(DTE) and the other end is a DB60(DCE).This
is wat that is label on the cable. Anyway, I try to connect this cable to
the serial interface of the 2 routers...and both the routers a
Dear all
Does anyone know where I can download cisco IOS. I am not a cco member and
therefore unable to access the cisco cco site.
I just bought 2 used cisco 2501 and I want to upgrade the IOS to a more up
to date version. Does ver 12.0 works on a 2501 ? what is the requirement to
run ios ver 12.
change the configuration register so that I can automate this process ?
Currently,the config register on my router is set to 0x2102
thanks
kw s
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73498&t=73498
--
**Please
Hi
I tried to use TTCP (test tcp) to measure thruput and apparently it is not
supported by the IOS that I am using. I am using 12.0,IP feature sets. Have
anyone managed to run ttcp
Is there other tools that I can use to test thruput ?
Any comments is appreciated
Regards,kws
Message Posted a
18 matches
Mail list logo