Can we use voice through Wireless Ethernet Bridge (like cisco Aironet )? Is
is possible to use voice if two cisco router having voice module and FXO/FXS
are placed on two location connected through wireless bridge? I read that
802.11b has a drawback of lack of interoperability with voice devies.
Hello
Can anybody tell me any mistake or missing configuration for frame relay
traffc shaping?
I connected two cisco 2600 router serial interfaces throug 32 k link. I
configured point to point frame relay subinterface on both interfaces. I
want to use this link on CIR 16k and peak rate 32k.
Dear All
I am facing a strange problem in 1751 routers.
In a simple scenario in which two 1751 are connected with over a channel with
serial port and eigrp is used for routing.
Router 1
s 0/0 ip addr 192.168.10.1
fe 0/0 ip addr 192.168.1.1
Router 2
s 0/0 ip addr 192.168.10.2
fe 0/0 ip addr
configure a floating
default
route as your interesting packet.
Dave
Khurrum Shahzad wrote:
Hi all
I want help regarding my scenario which is as follows.
I have one central and tow remote sites. Both two remote sites are
connected
with central through Wireless Ethernet Bridge (high speed
Hi all
I want help regarding my scenario which is as follows.
I have one central and tow remote sites. Both two remote sites are connected
with central through Wireless Ethernet Bridge (high speed).
At Central site Ethernet cable from both Wireless Bridge are connected to
switch and Cisco 2620
Use command no supervisory on voice ports at FXS router.
Hi,
i configured voice on two routers, on one router i ?hav a phone set
attached with Fxs and on the other router Pbx is connected with fxo. I can
recieve
and make calls from both ends, but i m having this problem that the phone
keeps on
to set the frame
relay encapsulation type to ietf and the LMI type to ANSI. The
defaults
are cisco encapsulation type and cisco LMI, neither of which will that
device understand. Try that change and let's see if that resolves the
issue. If not, please let us know.
HTH,
John
Khurrum Shahzad 6/12
I want some help regarding connecting cisco routers across a frame relay
based TDMA ( Time Division Multiple Access ) Network. In TDMA network,
main site (hub) is connected to different remote site having remote unit
(each site has differet DLCI). At main site there are two different path, one
2001, Khurrum Shahzad wrote:
I already configured frame relay ietf encapsulation and lmi disable (
no
keep alives).
In my configuration frame relay cloud get data from s1 with dlci 26
and
gives data on s1 with dlci 27. But in order to this configuration
words i
have to configure 2 additional
2001, Khurrum Shahzad wrote:
I already configured frame relay ietf encapsulation and lmi disable (
no
keep alives).
In my configuration frame relay cloud get data from s1 with dlci 26
and
gives data on s1 with dlci 27. But in order to this configuration
words i
have to configure 2 additional
When connecting cisco router ( as frame-relay switch) with frame relay
device, I configured frame relay route as
Serial 0Dlci in 16to Serial 1 Dlci out 26
Serial 1Dlci in 27to Serial 0 Dlci out 17
( require only these 2 routes)
But show frame-relay pvc shows both route
Hi all
I want some help regarding connecting cisco routers across a frame relay
based TDMA ( Time Division Multiple Access ) Network. In TDMA network, main
site (hub) is connected to different remote site having remote unit (each
site has differet DLCI). At main site there are two different
Hi all ,
I am facing a problem with my 2501 router. It
was working fine, but forthe lasttwoweeks I am not able to
connect to the console port of therouter. It shows nothing on the screen
when I try to connect and pressenter. When I checked the Signal level of the
console port on my Break
Hi ,
I am facing a problem with my 2501 router. It was working fine, but for
the last few days I am not able to connect to the console port of the
router. It shows nothing on the screen when I try to connect and press
enter. When I checked the Signal level of the console port on my Break Out
14 matches
Mail list logo
