Difference between IKE and ISAKMP [7:55841]

I have read through Cisco site however if some one can refer me to a site which offers to a simpler explanation it would be great ! Jaspreet _ Consultant Andrew NZ Inc Box 50 691, Porirua Wellington 6230, New Zealand Phone +64 4 238

RE: MPLS Vs EIGRP [7:54507]

Thank You everyone for the valuable input . This has helped me put the issue in the correct prospective !!! Cheers Jaspreet _ Consultant Andrew NZ Inc Box 50 691, Porirua Wellington 6230, New Zealand Phone +64 4 238 0723 Fax

MPLS Vs EIGRP [7:54507]

I am looking for a comparative design question: Why a large corporation should or should not use MPLS over EIGRP . Any useful links will be greatly appreciated . Thanks as always Jaspreet _ Consultant Andrew NZ Inc Box 50 691,

GRE tunnelling [7:52050]

Can some one let me know useful links to understand GRE tunnelling or can explain it. Thanks as always Jaspreet _ Consultant Andrew NZ Inc Box 50 691, Porirua Wellington 6230, New Zealand Phone +64 4 238 0723 Fax +64 4 238 0701

RE: Kind suggestion is Needed! [7:50317]

Some interesting reading http://www.faqs.org/rfcs/rfc1122.html http://www.faqs.org/rfcs/rfc1180.html -Original Message- From: HORVATH TAMAS [mailto:[EMAIL PROTECTED]] Sent: Thursday, 1 August 2002 6:32 p.m. To: [EMAIL PROTECTED] Subject: RE: Kind suggestion is Needed! [7:50317] If

RE: OSPF Route Summary [7:49085]

I have worked on something which might work out , however please correct me if I am wrong Sydney: 10.64.0.0-10.64.4.0 = 10.64.0.0/21 ( Last 3 bits are changing) Paris : 10.64.5.0 -10.64.6.0= 10.64.5.0/22 ( Last 2 bits are changing) LA : 10.64.7.0 -10.64.8.0= 10.64.7.0/21 ( Last 3 bits

RE: ip unnumbered [7:48894]

Hi Chuck Could you explain the statement : Usually, you would number your ethernet port with a public number, and you would use an ip unnumbered off that publicly addressed interface. - Normally we number the port with private address I am not sure what you mean by public number here!!! Just a

RE: Collision Detecting [7:48830]

Just confirming that when we say full duplex we are referring to switched networks over 100Mb. 10 Mb networks cannot run on full duplex. Please correct me if I am wrong. Jaspreet -Original Message- From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]] Sent: Tuesday, 16 July 2002 5:25

Next Step [7:48450]

Hi Everybody I have just cleared my CCNP . With not too much hands on experience and equipment to work with . I am wondering what to peruse next . The ultimate goal is towards CCIE however I believe that It would be fair to attempt after a couple of years experience to be a true expert .

RE: Dual Link redundancy .... [7:47854]

Do we need to setup trunks if we have default VLAN1 running only . -Original Message- From: Chris Harshman [mailto:[EMAIL PROTECTED]] Sent: Tuesday, 2 July 2002 6:59 a.m. To: [EMAIL PROTECTED] Subject: RE: Dual Link redundancy [7:47854] Configure both links as trunks then form an