Do we need to setup trunks if we have default VLAN1 running only . -----Original Message----- From: Chris Harshman [mailto:[EMAIL PROTECTED]] Sent: Tuesday, 2 July 2002 6:59 a.m. To: [EMAIL PROTECTED] Subject: RE: Dual Link redundancy .... [7:47854]
Configure both links as trunks then form an ether-channel. Both links will pass traffic but a failure of one will not affect the other. Cisco Example: set trunk 1/1 dot1q on set trunk 1/2 dot1q on set port channel 1/1-2 on Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47904&t=47854 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
