Mark, I should have started with the config on
http://www.cisco.com/warp/public/794/wicadsl_rfc_irb_nat_1.html
After a lot of trial and error (and trying to not take my web site offline
to much in the process), I managed to get a working configuration.
Here is my configuration, minus a few unrel
Anybody out there setup a WIC-1ADSL with Qwest DSL in Bridging mode.
I've got a Cisco 2621 and want to bridge the ADSL connection with fa0/0 (and
NAT fa0/1). I'm able to get the ATM session up, but can't get IP traffic to
flow.
Of the configs at:
http://www.cisco.com/warp/public/794/
the one at
I am setting this up in VLAN 1. So the vlan was already setup in the VLAN
database. I do have the ports in question set to switchport mode access.
All of the ports are in the same vlan.
Matt
--
Author: Larry Letterman (---.cisco.com)
Date: 03-04-02 15:21
Hi,
Have you set the vlan
I'm trying to setup a Cat 6500 running IOS 12.1 (c6sup22-dsv-mz.121-8a.E5)
as a layer two switch and I'm running into some issues. I have a group of
ports all on the same vlan, with "switchport" set to enable them as layer 2
switch ports. Directed IP traffic flows fine, but broadcast traffic is
4 matches
Mail list logo