Here's the link again:
http://www.cisco.com/warp/public/707/CBOS-multiple2-pub.html
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5712&t=5712
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.h
--
Mihai Dumitru
CCNP, MCSE
Systems Engineer
ROMSYS SA, Networking Department
tel: +40 1 2300810, mobile: +40 92 764287
fax: +40 1 2300815
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5709&t=5709
--
FAQ, list archives, and
Quick answer: yes, it is all possible.
Bob Edmonds wrote:
>
> Just a quick question... Is it possible to configure the AUX port on a
2501
> to dial out? Possibly configure DDR on it? Just wondering! Any help
would
> be greatly appreciated...
>
> Bob
> CCNA
> FAQ, list archives, and subscr
think that the ip addresses is connected directly to
> it,when after u config the router:
> ip route 1.1.1.2 255.255.255.255 dialer0
> u use "show ip route",u can't see the route to 1.1.1.2/32,because the
router
> think that the pc is connected directly to it
>
Configure several dialer interfaces (one for each NT box) on the 3640.
Don't forget to configure ms-chap authentication and dialer strings on
those interfaces.
Create or modify the access list(s) as needed, that one provided below
is the most general.
Something like this:
chat-script dial-up A
I think such cable is not available at Cisco. You can use two cables
instead: CAB-SS-V35MT and CAB-V35FC.
William wrote:
>
> Is this cable available at Cisco? What part number? Any vendor making
> this cable.
>
> Thanks,
> William
> FAQ, list archives, and subscription info:
http://www.groupst
Too little info. Anyway, issue "debug ppp authentication" and see what
happens.
suaveguru wrote:
>
> hi all
>
> I tried to practice ppp pap authentication but
> apparently it does not work , anyone knows why this is
> so and how should it be done . I have successfully did
> it on CHAP but not
Try to configure a dialer interface instead of directly using Async5.
leo wrote:
>
> the modem is connected to the aux,but after the s0 is down,the modem doesnot
> dial,why?
> the following is the config:
> Router#show conf
> Using 2413 out of 29688 bytes
> !
> version 12.1
> service timestamps
Issue the following command in configuration mode:
service password-encryption
then:
username password
Daniel ma wrote:
>
> How to create user with encrypted password? When I type the command
> 'username password 7 xxx', it ask for calculated password.
___
9 matches
Mail list logo