No Subject

_ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

test2

_ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Re: CCO practice questions

As far as I know there is no practice questions on CCO. Actually you will not be able to find practice questions for cisco test as in microsoft test. Yes it makes the prep. period harder. The best way the prepare is to read as much cisco press book as possible. There are few independent publishe

Re: Point-to-point vs. multi-point

check with OSPF configuration examples. for DV routing protocols RIP and IGRP split horizan is enabled by default. in point-to-point you will need static mapping for layer3. with p2m you won't need if you have full-mesh. mkezlev CCNA,CCNP ""Thomas"" <[EMAIL PROTECTED]> wrote in message 97ve9g$e

Re: ATM PVC monitoring with RPM

Dou you have IP address configured on the ATM interface. MRTG works with IP (folks correct me if I'm wrong) ""Teerapun"" <[EMAIL PROTECTED]> wrote in message 97v8lh$gkh$[EMAIL PROTECTED]">news:97v8lh$gkh$[EMAIL PROTECTED]... > Dear sir, > > I got the problem when I try to use MRTG for generate t

Re: E1 and S/T ISDN interfaces in Australia

ISDN S/T interfaces are used with ISDN BRI connections. T1/E1 links are used with ISDN PRI. E1 usally connectes to a module like NM-2CE1B for ISDN PRI. To test ISDN S/T interface you need BRI connection. Mkezlev CCDA, CCNP ""Albert Lu"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">ne

Re: CCNP Certification

support exam has 70-75 questions and you have 140 minutes. foundation (I took ver 1.0 foundation) had 70-75 questions and the same time frame. you should score at least 700/1000 to pass the test. Foundation exam did not allow you to go back andreview the questions. mkezlev CCNP,CCNA ""Marcello Ho

Re: Ethernet MAC <--> Token Ring MAC

reverse bit sequence for each byte. -> direction eth reads each byte x x x x x x x x <- direction t/r reads each byte 43 (0100 0011) in eth becomes C2 (1100 0010) in token ring 5C.02.00.01.43.22 in eth mac becomes 3A.40.00.80.C2.44 in t/r mkezlev CCNA,CCNP ""Michael Snyder"" <[EMAIL PROTE

Re: Access to Cisco Routers for Training

kovelar, The sites you reer are nor accesable. ""Buzz"" <[EMAIL PROTECTED]> wrote in message 99emdu$qkj$[EMAIL PROTECTED]">news:99emdu$qkj$[EMAIL PROTECTED]... > I have 5 Cisco Routers that can be accessed via reverse telnet, to each of > thier console ports. I'm only looking for $50 for 5 days