RE: Ip address sweep

you can also use nmap - www.insecure.org - believe its been ported to NT but primary a unix product, very good can even tell you IOS, service pack, OS is running.. -Original Message- From: Robert Nickson [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 13, 2001 10:26 AM To: '[EMAIL

RE: How to stash more than 100 ACLs in a router

Use named access lists eg ip access-list extended name. - only supported in ios 11.2 and above -Original Message- From: ciscojolof [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 28, 2001 3:51 PM To: [EMAIL PROTECTED] Subject: How to stash more than 100 ACLs in a router Guys,

RE: Strange occurances in syslog

I have seen this before with inbound access lists..dont know why it is port 0, i beleive outbound access lists give the port numbers Brian -Original Message- From: Robert O'Brien [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 30, 2000 12:12 PM To: [EMAIL PROTECTED] Subject:

RE: Need Urgent Help---IPSec

Set the clients to use the corporate DNS as primary - no secondary, and then configure the corporate DNS to use the Internet DNS roots (hints file) - this assumes that the corporate has a transparent connection to the Internet. See for bind 8 based systems - http://www.linux.com/howto/DNS-HOWTO-5

RE: SSH over Internet - secure? [7:10251]

Sam, It should be, but SSH 1.5 is not completly secure, I would recommend a SSH 2 host on site then SSH over to router. When talking about using SSH on the router please take into account the recent Cisco Security Notice http://www.cisco.com/warp/public/707/SSH-multiple-pub.html -Original Mes

RE: BGP Table Size

BGP router identifier x.x.x.x, local AS number BGP table version is 212446, main routing table version 212446 83420 network entries and 83420 paths using 10761180 bytes of memory 12347 BGP path attribute entries using 592656 bytes of memory 10380 BGP AS-PATH entries using 258116 bytes of memo

Patch releases

Just a quick question! Hows does one get the patch releases of IOS??? Eg 12.1.(3.1)? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure

Connecting console port to a async port

I am having some problems with the above, what I have is a Cisco 2600 series router with a 16 port async card, and I want to connect this to the console ports of various routers/switches/other devices so we can access the console. I have basically got it working apart from the key, when I issue

RE: NTP WITH AUTHENTICATION

This is a sample working configuration Peer : ntp authentication-key 1 md5 ntp authenticate ntp trusted-key 1 ntp server 192.168.233.225 key 1 ntp server 192.168.233.226 key 1 ntp server 192.168.233.242 key 1 end -Original Message- From: Clifton Stewart [mailto:[EMAIL PROTECTED]] Se