Hi guys,
I am not able to change the console speed of my 7204 VXR at all.I
wanted it at 115200 to do a xmodem But it just cannot beyond 9600
What am i missing here.
r7#line con 0
r7(config-line)#speed 0
Failed to change line 0's speed
Does 7204 VXR console cannot go beyond
Hi Everybody,
I ran into a weird trouble the yesterday.. I am having Cisco 3600 router
with some 16 Class-C connected to the Fast Ethernet as secondary addresses.
My host were not able to ping the router across the ethernetat all... I
was seeing the ARP entry of my host on the router but n
Hi Everybody,
I need some help on this issue.. I am having Cisco 3600 router with some
16 Class-C connected to the Fast Ethernet as secondary addresses. My host
were not able to ping the router across the ethernetat all... I was seeing
the ARP entry of my host on the router but not able to
Can somebody help me in the following
1) How to write to the Cisco running config via SNMP read-write access ?
2) do i need any software for it and is there a downloadable version i can
try ?
3)Can i modify the ACL on the running config Via SNMP
i am able to see the config via pingpropack of ip
Guys i am not able to get a good answer on this issue which i have posted
last week. Can somebody PLEASE help me in the following
1) How to write to the Cisco running config via SNMP read-write access ?
2) do i need any software for it and is there a free downloadable version i
can try ?
3)Can
Hi All,
I am having a 7204VXR with 40MG of Flash. The router boots fine when powered
Off/On. But i cannot say " show flash" I see the IOS on disk0: I have
already tried a bunch of IOS. Formating the disk0: doesn;t help.
46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
409
Hi All,
Can somebody give me good links to understand extended BGP ACL I have
spend good amount of time but cannot understand this throughly
If somebody has good writeup or URL and can be shared... Really appreciated.
Thanks
access-list 101 permit ip 10.6.144.48 0.0.0.8 255.255.255.240
Do we have any links or writeup to understand how the load 10/255 txload
and rxload are calculated in the "show interface serial " command
i wanna understand what 10/255 means on a T3.
Thanks
_
Send and receive Hotmail on you
Hi guys,
I have a 7202 running 11.1. I cannot use "sh bootflash" how do i upgrade
the bootflash.
I am trying to put 12.0.7 which needs a bootflash upgarde too..
Please help...
Thanks
_
Chat with friends online, try MSN Messen
9 matches
Mail list logo