Loopback Interface

Hi all, What is a Loopback Interface and what is it's use ?.. Can anyone help me out.. In configuring FrameRelay for point-to-point connection, loopback inetrface is been advised why ?? thanks in advance . hari Get free

( Sh Int serial ) I/p & O/P rate Explanation

Hi all, I have a doubt.Iam having a 64 kbps RF leased link to my ISP .When using the " show interface serial 0" command, in the output we get the Last 5 minute Input & Output rate. During peak utilisation sometimes I/p rate is about 63Kbps and O/p is about 5 to 10 Kbps. , or vice versa.

Dialer Interface * VERY URGENT *

Hi all, I have installed a 2503 router for ISDN dial back for a leased line.The vendor who configured it has included the following commands in the dilaer interface . (1) #dialer in-band and (2) #dialer wait-for-carrier-time 60 Since the above commands should not be used for IS

1 Ethernet and 2 Serial Int. config

Hi all, Iam having a 2501 router with 1 ethernet and 2 serial interfaces.I have configured one serial in , say 205.245.222.32 and ethernet in say , 202.54.44.34. Iam using the serial to connect to internet using a Gateway of Last Resort and like to configure the other interface for a Point-t

" Interface Async " command

Hi all, I like to know when we will be using the " Interface Async " command and how .. Thanks, hari Get free email and a permanent address at http://www.netaddress.com/?N=1 ___ UPDAT

(BCRAN) Last minute Suggestions

Hi all, Iam taking my BCRAN next week and if anyone is willing to give some last minute advice...it would be helpful for me. Thanks in advance hari Get free email and a permanent address at http://www.netadd

BSCN Study

Hi all, Iam preparing for BSCN . Since it contains purely routing (BGP,OSPF and EIGRP ) , Iam planning to use the design guides for each like Halabi's book for BGP . Similarly the design guides of Cisco Press for the other two.Is it good to study like that. I will be glad if

(Off-Topic) Openview vs Sniffer

Hi all, Iam planning to install a N/w monitoring tool in my site.I like to know which is better ,Sniffer or HP's OpenView. Sniffer says it holds a market share of 75% and Hp's is only 16% . Is it true??. Also if possible can anyone tell me the pros and cons of these two. Thanks in a

Pls..DO REPLY

Hi all, I haved passed my CCNA and going to start preparing for CCNP2.0 Having gone thru the BSCN syllabus in Cisco.com and Boson.com..they have added many new topics..One of which is Advanced Routing.. I would like to know what this portion actually covers??? Moreover Access Lists,Novel and Apple

Advanced Routing

Hi all, I haved passed my CCNA 1.0 and going to start preparing for CCNP2.0 Having gone thru the BSCN syllabus in Cisco.com and Boson.com..they have added many new topics..One of which is Advanced Routing.. I would like to know what this portion actually covers??? Moreover Access

DHCP Broadcast thru WAN

Hi all, Iam having a DHCP server the hosts receiving them are in another place and they are connected thru a WAN link using 2 routers.Since routers dont broadcast by default,how can I broadcast my DHCP requests and replies between the server and clients.Is it possible to use extended IP acc

CCNP2.0..Important doubts

Hi All, I have completed my CCNA 640-407 and going to prepare for CCNP 2.0 I would like to know if the older version of CCNA is enough to pursue my CCNP 2.0 or has Cisco given any conditions to take the new version.. Thanks in advance, hari __

Thanks all / Books for CCNP2.0

Hi all, THANKS FOR EVERYONE ..I passed my CCNA today with a score of 888. ur inputs have been very valuable to me..Iam planning to start studying for CCNP 2.0 and will be glad if anyone can guide towards good books for CIT 2.0,BSCN , BCMSN AND BCRAN.. THANKS IN ADVANCE.. hari

Last Minute Clarifications (Important )

Hi all, Iam going to take my CCNA 640-407 Exam , next week.I will be really glad if you all can clarify my following doubts.. (i) In the Exam Objectives X.25 and AppleTalk are covered but is covered in detail in Laura Chappel's ICRC book and Todd's CCNA guide , both of which Iam using.Alt