We have a problem with BGP , We need your advice to isolate the cause and
solve the problem .
We have three downlinks and two upliks . We use BGP at one way
for incoming traffics .
So we advertise our own IPs through the three providers Interpacket ,
Netvision and paltel .
We successfully do BGP
Will the half duplex nature of wireless make a problem in voip that require
full duplex?
***
Important
Confidentiality: This communication is intended for the above named person
and is confidential and/or legally privileged any opinion expressed in this
communication are not necessarily t
isdn all-incoming-calls-v120
no cdp enable
ppp authentication pap
ppp multilink
Thanks
Osama Kamal
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=44013&t=44013
--
FAQ, list archives, and subscript
Is it possible to configure Cisco IP phone from the phone set itself, and
use it without Call Manager software?
I need to use IP phone from home to place calls over internet without
additional software or PC's, any idea?
Regards
Osama
Message Posted at:
http://www.groupstudy.com/form/rea
Is there any other IP phone that is capable of working as a stand alone voip
set?
Osama
-Original Message-
From: Michael J. Doherty [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 23, 2002 2:25 PM
To: Osama Kamal; [EMAIL PROTECTED]
Subject: Re: IP phone [7:44803]
The Cisco IP Phones
We are using ATM over microwave with E3 link, the link utilization is about
20%, I am not able to use TFTP across the link, after checking I found many
UDP errors on the LS1010 device that has the E3 port.
how can I check where the problem is?
Thanks
Osama
Message Posted at:
http://www.grou
2 questions:
Can the PIX work as a DHCP relay agent?
What are the ports required to be opened on the pix to allow DHCP relay
agent traffic to pass through?
Thanks
***
Important
Confidentiality: This communication is intended for the above named person
and is confidential and/or
Try to remove the x25 address from each interface and remove the current
routes, the new routes should reflect the actual physical connectivity for
example:
x25 route interface Serial2/0
x25 route 4401 interface Serial2/1
x25 route interface Serial2/3
...
..
Osama Kamal
Does anybody know if there will be performance problems when using 2610
router with T1 voice card with 24 channel? I know it is supported, but i
want to be sure about performance issues.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51109&t=51109
Is it possible to change the TCP port used by H323 from 1720?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52476&t=52476
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
I am having a problem with a blocked port somewhere on the internet down to
my router, my ISP is denying any blocking from their side, is there is any
way to know where exactly the port is blocked?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53657&t=53657
-
e.org, pick a route server/looking glass and try from
there.
""Osama Kamal"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am having a problem with a blocked port somewhere on the internet
down
to
> my router, my ISP is denying any blocking fr
12 matches
Mail list logo