I am using PIX 515 IOS ver 4.4. I have to allow only one inside user to
access an Internet address on a particular port. I am using outbound
statement with except to do this. But it is not working. Can anyone put some
light on that. Here is what I am doing:
A user from 10.6.x.x subnet needs
I am using PIX 515 IOS ver 4.4. I have to allow only one inside user to
access an Internet address on a particular port. I am using outbound
statement with except to do this. But it is not working. Can anyone put some
light on that. Here is what I am doing:
A user from 10.6.x.x subnet needs to
In the PIX firewall I have to allow one internal address to access one
external address on a specific port. I am using PIX Ver 4.4. And the
outbound statement only allows either source or destination. Is there any
way I can do it..?
Thanks
Is it necessary to reboot router after changing bandwidth?
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
I have got a corrupt flash on my router. It goes to ROMMON after starting.
IP doesn't start and it goes to same mood even if I change config-reg to
0x2101 . Its a 2600. See the startup message.
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems,
From my router having native ISDN BRI interface I am able to ping the remote
router's ISDN interface but getting no response from local ISDN interface.
Same thing is happening at the other end. I know that the link is up and
connecivity is there but I don't know what is causing this pinging
Can I connect Token Ring Interface on my router directly to LAM Port?? I
have tried it but it shows down/down status on the router. Initially I tried
it by putting a TR hub b/w Router LAM. And it worked fine.
Is there any issue connecting Router directly to LAM Port?
Can I connect Token Ring Interface on my router directly to LAM Port?? I
have tried it but it shows down/down status on the router. Initially I tried
it by putting a TR hub b/w Router LAM. And it worked fine.
Is there any issue connecting Router directly to LAM Port?
I am planning to turn-on bridging on two different routers' ethernet
interface accessing same host. On Router A I am turning on bridging on its
ethernet interface and It is running EIGRP. On Router B I will be turning on
bridging and it will take different route and use OSPF.
Is it gonna
on EIGRP
as secondary.
Kindly read the scenario again if u are facinf problem in understanding. Its
not a bridging or routing issue.
Thanks..Peter
From: "Chuck Larrieu" [EMAIL PROTECTED]
Reply-To: "Chuck Larrieu" [EMAIL PROTECTED]
To: "William Swedberg" [EMAIL PROTECTED
I have got a problem with FR Config Running OSPF. Router A B are connected
to C D over FR PVC but they don't have to talk to each other. It means A
connected to C D and B is also connected to C D. I am using FR
Subinterfaces with pt-to-pt. What is happening that sometime I am able to
ping
I have got a problem with FR Config Running OSPF. Router A B are connected
to C D over FR PVC but they don't have to talk to each ther. It means A
connected to C D and B is also connected to C D. I am using FR
Subinterfaces with pt-to-pt. What is happening that sometime I am able to
ping
What is the difference b/w these 2 commands:
conduit permit tcp any 22.0.41.0 255.255.255.0 eq 411
conduit permit tcp any eq 411 22.0.41.0 255.255.255.0
What does the following lines mean:
conduit permit icmp host 195.210.22.4 any echo-reply
conduit permit icmp host 195.210.22.4 any echo
What
How to flip a Token Ring MAC to Ethernet MAC. What is the rule for that? I
have a token ring MAC address...41003511
It has be to be converted to Ethernet MAC.
Any comments..
Get Your Private, Free E-mail
How can I ping the MAC address of a host. Is it just like pinging the ip
address. I tried it but didn't get response. What will be the syntax?
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
Can anyone explain following lines in Border Guard firewall SNA filter. What
these lines decribe. How can I allow SAP 12 to pass thru firewall using this
info?
filter br_sna_8022
not mac_sa in
16 matches
Mail list logo
