Does any body know this:
I am configuring the VPN 3000 to send SNMP traps to our network monitoring
system. I need to know the text that the VPN 3000 generates for all events
in certain event classes. I will set the VPN 3000 to forward these events as
traps. The event classes of interest are:
The CCDA exam has a lot of case study questions and at least 30 of the
questions are case study so make sure that you do all the case studies at
the end of Cisco's DCN book. the CID exam does not have any case studies.
Reza
CCNP,CCDP
""Miller, Nathan - BSC"" <[EMAIL PROTECTED]> wrote in message
For BSCN all you really need is read the Cisco Press Routing book.
Reza
"Moahzam Durrani" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
> How effective are the cbt , netg training modules. I get them free through
> the organization.Has anybody used them befo
test
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=44893&t=44893
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Ivan,
Take a look at the subject (CCIE written question)
that Dennis responded to on May 20.
He is a great source for this group.
Thanks
Reza
""Ivan"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I have a interest question, doesn't any one know the answer?
>
>
Does any body know where to get a CD Doc on CD?(version 12.1)
The ones that come with routers are very old.
Thanks
Reza
""Cisco Nuts"" wrote in message
news:20021032.AAA21502@;groupstudy.com...
> Hello,
> Does any one know of any specific shortcuts ( one example) on how to use
the
> DOC Cd
Here, The price is $125
""Lesly Verdier"" wrote in message
news:200210311532.PAA09020@;groupstudy.com...
> Hi all,
>
> I just passed the CCNA-exam. I had to pay 170 Euro (in the
> Netherlands) which is approximately $170. Is the price for
> this exam also so expensive in the US?
>
> Just curious.
www.cisco.com
You need a CCO account to download IOS.
Reza
""Pedro do Valle"" wrote in message
news:200211081443.OAA23607@;groupstudy.com...
> Hi...
>
> How can I install a new IOS in my Cisco2501?.
>
> where can I search a step-by-step?
>
> thanks
>
> Pedro
Message Posted at:
http://www.grou
Here is a situation,
I have a Cisco 4000 router connected to a 2500 router back to back with a
DTE, DCE cable (4000 50 pin serial and 2500 60 pin serial.) At this time the
cable side that is connected to the 4000 is DCE and the 2500 side is DTE.
Does any body know how to swap that around (change th
I am looking for the pinouts for DB60 (DTE) to DB50 (DCE). The cable is
configured as DB60 (DTE) to DB50 (DCE). I need to switch it due to device
configuration issues. (my 2522 is my frame relay switch and need to be DCE)
Can someone point me in the right direction. I check
CCO, but have not bee
You may have to upgrade your bootrom if it is any version before 10.
That is also in sh ver.
Reza
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51444&t=51387
--
FAQ, list archives, and subscription info: http://www.groupstudy.co
Mike,
Yes, I have taken the Bata. There is a big difference between this new test
and the old one. There is a lot of Voice, QOS, MPLS subject in this new test.
The old test was very much concentrating on Token Ring.
Reza
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51449&t=5
Hamed,
These commands basicly enable TACACS+ server for Authentication purpose. For
example you need the first command to enable TACACS+ on your router, second
command say that the default auhtentication is TACACS server and the third
one says if no TACACS you can login using username and password
Thank you all for your responses. I tried all the web sites that you
recommended, but after all It seems like there is not much of these material
out there. Priscilla, it is good idea go for it. I will be one of your first
customer to buy the material. How about trying
"Internet Routing Architectu
Is that because there are more than 1 CCIE,s?.
Reza
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52147&t=52146
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and No
Did you load the right IOS?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52682&t=52677
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EM
you can also use a roll over cable to connect 2 routers through the AUX ports.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52735&t=52708
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Re
You probebly need to upgrade you boot room first..
""Leonardo Rocha"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> People,
>
> Any advise for my problem is welcome :
>
> I have an 2501 with a 4MB DRAM module that works fine. Yesterday, I got 3
> differents 8MB DRAM modules a
The cheapest place I have found is Ebay.com they go for about $20 each. I
just got 2 for my 2500 routers.
hope this helps
Reza
""Vik Da mon"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi, has anyone found any places for cheap flash memory for the 2500 4000
> series routers
19 matches
Mail list logo