Cisco SE's get 60%. That's a good discount. I know of one company that gets
44%.
Joe
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18023&t=17980
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.
I recently upgraded the software on one of our GSR's. All of my interfaces
are going nuts. I did a show version and noticed that it was saying "upgrade
rom-monitor" "upgrade switch fabric". I tried the upgrade rom-monitor
command and the router seems to be hosed. No resonse at the console. I
logg
You can use CAR on a router to rate-limit by aggregate. It will rate-limit
by IP, sub-net, or just blanket converage. If you want to rate-limit with a
CAT6k, then you must have a MSFC card. You can use CAR on the MSFC. But that
is creating (one token bucket) or one rate for all the traffice within
Try a
router> show sessions
show sessions is the command
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17577&t=17575
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
The way I understand it and when I used it in our lab environment CAR works
good. You can rate-limit per IP, IP block, or all traffic as an aggregate.
DCAR is where the processing is distributed to the VIP. So I don't see how a
2600 could use that. Of course on an interface that use a VIP card, if
I need help setting up Microflow switching. I have a 6506 with a sup1a-ge,
it has the MSFC and PFC in it. I can't get it to use Microflow switching.
I'm trying to set our customers to a certain bandwidth limit, but it won't
engage at all. If anyone can be of help, please let me knoow. If you have
We use ce-590's a in several places. We're using WCCP v2, so our routers
must run at least 12.0(11). The 2.1 code is has had a lot of problems. We've
upgraded all of ours to 2.51. We're waiting for the release of the Ruby code
(4.1). There will be a lot more features available in it, as well as a
I'm trying to learn more about microflow switching. I understand that
microflow switching can rate-limit by aggregate or by flow. I would like to
rate-limit ip flows going through our network that use our switch. I was
looking at CAR, but CAR only uses one token bucket. I need a solution that
will
8 matches
Mail list logo