hi all,
I know that the mpls label is in between the layer 2 and layer 3 header.
Does anybody know where I can get the exact packet format like that for
IP packets (version bits and stuff like that) ?.
e.g. : -
node1 --- node2
(1.1.15.1) (1.1.15.2)
0c4b2c59
Hi,
Does anybody have a working configuration for connecting two ATM on
CISCO 7505 connected to each other by point -to-point OC3 cable ..
topology :-
R1 (atm) - (atm) R2
thanks,
krishnan.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=10151t=10151
Hi Robert,
I thought I configured my ATM correctly but apparently I am having some
problems. I am not sure what it might be
R1 (atm) (atm) R2.
conf of R1 (only relevant stuff)
interface ATM1/0/0
ip address 1.1.10.1 255.255.255.0
no ip directed-broadcast
ip route-cache distributed
ip
Hi,
Can you be more specific and also explain how to define sub interfaces for
ATM ?.
are there any pointers I can look at for the CLIs ?.
thanks,
krishnan.
NECATI ERTUGRUL wrote:
You should use subinterfaces in your ATM configuration to piny itself. Due
to an unknown reason if
you don't
Hi ,
It says can't group on point-to-point interface .
How do I solve that ...
thanks,
krishnan.
NECATI ERTUGRUL wrote:
I am sending you a configuration example below :
interface ATM1/0
bandwidth
no ip address
atm clock INTERNAL
no atm ilmi-keepalive
!
interface
Hi All,
I am new to Cisco's certification and want to start with CCNA. Can you
suggest the following :-
1. What are the books I need to buy ?.
2. How much time does it take to cover all this material ?
3. Any tips / comments / suggestions for preparing and taking the test.
Thanks,
Krishnan.
Hi All,
Topology of my network.
|--(fe)SB3(1.1.15.2)
1.1.13.1
|(fe)
SB1 (fe) (fe)R3 (fddi)--(fddi)R5 (pos)--- (pos)R1
(pos)- (pos)R4(fe) -(fe)SB2(1.1.16.2)
|(atm) |(atm)
Hi All,
I guess the topology I had drawn got truncated.
You can have a look at the topology at
http://www.cs.uoregon.edu/~krishnan/mpls/
Thanks and sorry for the trouble.
Krishnan.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=8189t=8189
Hi All,
I am not sure what is the difference between tag-switching and MPLS
Also, are all mpls commands backward compatible to tag-switching ???...
Thanks,
Krishnan.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=8027t=8027
Hi All,
I have been receiving enumerous replies from people stating that
tag-switching was pre-developed MPLS by CISCO. I am looking for more
information as in what are its differences ???.
If I am configuring something on a CISCO router to perform MPLS TE then
some configuration commands are
Hi All,
I am trying to understand the state of the art on MPLS technology. Does
anybody know if either CISCO or Juniper supports MPLS label stacking,
label merging, explicit label assignment on explicit routes.
Also, what are the necessary hardware and software requirements for
them.
Thanks in
11 matches
Mail list logo