Dear Group,
In h323 enviroment I have to " bill" all the calls, VOIP calls too.
The billing system is "synchronized" with AS5300 and not with the Gatekeeper.
The question is "is there a way to force the intra voip calls (H323) through
the AS5300"?
Any idea
Thanks in advance,
Teresa
Messa
I bet 1$ on the static /26
Teresa
- Original Message -
From: Peter Slow
To: [EMAIL PROTECTED]
Sent: Wednesday, August 22, 2001 5:16 PM
Subject: RE: Quick CCIE Written Question [7:16797]
you're wrong.
the /28 will be chosen.
-humboldt
-Original Message-
From:
anybody can help me?
After a clear arp cache i have
nternet 172.17.1.33 - 00b0.6469.4641 ARPA Ethernet0/1
Internet 172.17.1.29 0 Incomplete ARPA
Internet 172.17.1.27 0 Incomplete ARPA
Internet 172.17.1.11 0 Incomplete A
It didn't ping successfully.
In the sho log I see the following line:
UTC: %AMDP2_FE-3-UNDERFLO: Ethernet0/1 transmit error
I reloaded the router and now I can see all the MAC address in the arp cache.
By the way something is going wrong...
see this two sh int output
grp_ge#sh int eth0/1
Ethern
I've contacted the cisco TAC.
The CE write " is this router connected to the switch on the ethernet side.
If
it is then can you verify if the switch has good entries for the mac addreses
of the PC's. Also you can run "debug arp" on the router and you will see that
the router is sending arp request
The cpu load is normal (10%) for all the time.
There is a possibility that is an attack, but if I control nat translation,
cpu, int stat , I find no trace for background traffic.
Teresa
- Original Message -
From: Reinhold Fischer
To: Teresa Presutto
Cc: [EMAIL PROTECTED]
Sent
customer will check the stack of the switch and phone back
*** CASE LOG 24-AUG-2001 08:14:52 PSTAction Type: Resolution Summary ***
*p*
problem was introduced from a SUN that has been turned off
- Original Message -
From: Paul Werner
To: Teresa Presutto ; [EMAIL PROTECTED] ; [EMAIL
t resolved.
v/r,
Paul Werner
From my very poor Italian translation:)
Avete una buona fine settimana!
Get your own "800" number
Voicemail, fax, email, and a lot more
http://www.ureach.com/reg/tag
On Fri, 24 Aug 2001, T
CNNA Companion question (obviously I read the answer and I know the command ,
but I would like to know why...)
Which of the following addresses would be require the use of ip subnet-zero
command?
156.100.11.37 255.255.240.0
131.64.16.133 255.255.255.128
192.168.36.10 255.255.255.0
205.100.16.3 2
- Original Message -
From: Christopher Supino
To: Teresa Presutto ; Cisco
Sent: Wednesday, August 29, 2001 11:49 AM
Subject: RE: ccna companion question [7:17648]
The first answer would be correct, because it would require IP
subnet-zero
to be running. This command all
Any suggestion to troubleshoot this problem will appreciate...
I have a 7206VXR router in witch are terminated pppoA sessions.
>From the sh int atm I can see the following:
mil_7206_2#sh int atm2/0
ATM2/0 is up, line protocol is up
Hardware is ENHANCED ATM PA
Description: "Collegamento ATM
Dear all,
i'm reading a document downloaded from CCO about router bridged
encapsulation.
It describes advantages and disadvantages of RBE. Ok for pro
(configuration less CPE, support existing CPE, simple implemantation l3
ssg/ssd and so on).
On the other hand, it's not clear for me the cons:
1)no
I am willing to contribute too.
Let me know how I can.
Have a nice day.
Teresa
Here in Italy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=29039&t=28901
--
FAQ, list archives, and subscription info: http://www.groupstudy.com
Dear group,
I'm not in able to register my H323 terminal.
>From the debug h225asn1 I receive rrj message: undefined reason.
Anybody can help me in troubleshooting it?
The problem seems related to gatekeeper zone.
Teresa
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58391&t=
14 matches
Mail list logo
