If you don't have map statement at the spokes this will not work. Basically
what you are missing is the layer 2 to layer 3 mapping. Just like ARP on
ethernet the router needs to map a layer 3 address to a layer 2 address. In
this case you do it with a map statement which links the IP address
Here is a great reference
http://www.cisco.com/warp/public/473/46.html
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, March 21, 2002 3:41 PM
To: [EMAIL PROTECTED]
Subject: CAT4003 and 3com [7:39084]
Greetings,
Any
www.cisco.com/go/support
Select Tool Index
Select Software Advisor
-Original Message-
From: John Nemeth [mailto:[EMAIL PROTECTED]]
Sent: Sunday, March 17, 2002 12:24 AM
To: Tom Petzold; [EMAIL PROTECTED]
Subject: RE: Firmware Releases: Cisco Compared to Microsoft [7:38454]
RE
release to
transition too.
Cisco IOS Release process
http://www.cisco.com/warp/public/cc/pd/iosw/prodlit/iosrp_ds.htm
Change Management Process
http://www.cisco.com/warp/customer/432/change-mgmt.html
Tom Petzold
Cisco Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED
Take a look at some campus design guides on CCO.
http://www.cisco.com/warp/customer/779/largeent/design/campus_index.html
Tom Petzold
Cisco Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jeffrey Reed
Sent: Friday, March 15, 2002 2:41 PM
How do you expect the router to control which line Verizon delivers the call
on? Verizon needs to setup the hunt group on their switch. Call Verizon,
give them the phone numbers, tell them which one you want to be first in the
hunt group (the number users will call) then tell them you want the
Remember the model OSI model. IP can have multiple higher level protocols
running over it. So IP uses protocol numbers to identify the higher level
protocol that it should send the data to. If you do a deny ? on a router
you will see all the different protocols (eigrp, gre, icmp, ospf, pim,
Peer routers are routers in the same area.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
mlh
Sent: Sunday, February 17, 2002 11:32 PM
To: [EMAIL PROTECTED]
Subject: what does peer routers mean? [7:35705]
OSPF and EIGRP could support a maximum of 50
answer. Could you give me more detail about an area?
Is it a subnet or AS?
- Original Message -
From: Tom Petzold
To: mlh ;
Sent: Monday, February 18, 2002 11:01 AM
Subject: RE: what does peer routers mean? [7:35705]
Peer routers are routers in the same area.
-Original Message
If you're not using LEAP you don't login. The login program is only used if
you are using LEAP. If your not, just make sure that your WEP settings are
correct on both sides: none, 40 bit, 128 bit, and that the key is correct.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
I think a more correct fix would be to change your NAT access list to
exclude the external interface. I'm not sure why the router NATs the
outside interface but it will if you include it in your access-list. Put in
a deny statement for your outside interface.
access-list 101 deny ip
11.10T for both the 340 and 350.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Sunday, February 17, 2002 8:21 PM
To: [EMAIL PROTECTED]
Subject: Aironet 350 APs and Security Concerns [7:35686]
Does anyone know which software versions of the Aironet 350 APs
12 matches
Mail list logo
