If you have lets say 4 WAN sites or 3 WAN sites connecting as a triangle,
does it make sense to use one network lets say 192.168.5.0/30 as the
subnetted ip address for all the WAN serial interfaces between all the
sites.
_
How can I connect a router to a PBX to get it to talk. In specific I'm
implementing VoIP and want to connect it to my PBX. Do you use a specific
PRI, EM or what type card and cabling between the two.
Thanks.
Tom
_
Get your
I have a client behind he firewall that is trying to VPN using Cisco's VPN
client (5000 series) to VPN to a site on the Internet. Would I have to open
up anything on the firewall to allow it out. Currently everything is
allowing out but the connection can't be established.
Thanks.
Tom
Anyone know why machines on a switch are arping itself such that it can't
communicate with anything else except itself.
_
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Message Posted at:
When I do a trace from a server from one side to another side of the
firewall, if there's a total of 5 hops, all 5 hops that return are displayed
with the address of the destination address. Does anyone know why it is
doing this.
Thanks.
Tom
What is the difference between Asychonrous and Synchronous. Also, what is
the Group-Async port on an access server?
Thanks.
T
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
Typically if you're a company that has may 5 to 7 vendors that you need to
connect to, in terms of the WAN connetion, what is the best approach:
- have these vendor WAN connections come in thru a WAN router and then have
the WAN router go thru a firewall to get to your corporate LAN
or
-
I have a vpn solution from the internet but some apps don't work because of
latency over the internet. One of the solution I'm thinking of is using a
AS5300 for dialup for users to dialin. Is this a good solution and if so
where should I place this As5300 and how should it be configured.
Can anyone tell me how big the Internet routing table is in terms of the
routes and the space of RAM necessary to store it. Also, if there's a link
to it I would appreciate a link to it. Thanks.
Tom
_
Get your FREE download of
I need to get some feedback on the type of memory to put into a Cisco
equipment. Two of the most popular are Cisco memory and Kingston. Of
course Cisco is a lot more expensive than Kingston. Which memory do you
recommended getting and are there any issues with getting Kingston. By
issues
I am running eigrp in my routing and have two separate paths to a
destination. One path has a higher metric of course. Sometimes when the
lower metric link goes down, sometimes it doesn't converge so that routing
will go through the higher link automatically. Sometimes it does converge
and
If my ISDN BRI has a U Interface built in, can I just plug my ISDN circuit
in and start using it or do I have to get a NT1 adapter.
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
Does anyone know why on my AS5300 I have to reset the AS5300 maybe every 4-6
weeks for it to be able to dialout. After the reset it will work fine until
noone can dialout at which time I just need to cycle to get it to work.
It's as if there's some sort of timer.
I have a T1 coming into my VPN 3000 Concentrator. When I dialup to the
Internet and get a connection rate of 50.6 Kbps and then VPN into the
corporate LAN via this connection the throughput is slower than if I dialed
directly into the corporate LAN via a direct dialup and getting a connection
I have a VPN 3000 concentrator installed. When Microsoft Outlook is
launched with the VPN client connection, Outlook is extremely slow. Has
anyone encounter this or have any insight on this. Thanks.
Tom
_
Get your FREE
Can someone explain in detail or show me a link that shows/explains in
detail what a digital certificate does for a VPN concentrator and a VPN
client. In addition I'm trying to find the purpose, how it does it, etc.
I'm having a hard time understanding what role, why and how digital plays
I have the following config for auth on the pix 500 series
aaa-server RADIUS protocol radius
aaa-server RADIUS (inside) host 192.168.1.1 cisco timeout 15
aaa authentication http console RADIUS
aaa authentication http outbound 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 RADIUS
This should be all I need to
Anyone configure Windows 2000 Internet Authentication Service (IAS) to work
with a Cisco PIX for outbound Internet access authentation? I'm having
difficulty configuring the IAS side. Thanks in advance
_
Get your FREE download
Does anyone have a configuration where your site has two Internet
connections (thus 2 Internet routers via separate circuits) that connect to
the same ISP. Furthermore you are given two class C networks to use. I'm
looking into a BGP configuration where I can provide redundancy via the
19 matches
Mail list logo