If you had 3 locations in a hub and spoke topology,
then you would want two pvcs going to each
site...(using subinterfaces), how do the numbers
change as you add remote sites...
e.g. if you add the 4th site, do you have to add a pvc
to every other site?, totalling 3 pvcs/subinterfaces ?
so
yes, I did search on cco, found nothing.
#?
Exec commands:
{snip}
restart Restart Connection
{snip}
=
ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH...
__
Do You Yahoo!?
Yahoo! Photos -- now, 100 FREE prints!
I work with a bunch of bleeping retards that need to
configure basic dial-peers / voice ports... and they
also need to have a ""quick reference "" guide
to typical trouble shooting commands (i.e. show
bleeping call voice port active monkey bleeps)because
they are to bleeping lazy and
i was to worked up to actually make the request, does
anyone have a quote cisco voip dummies guide?
--- Chuck Larrieu [EMAIL PROTECTED] wrote:
Lucky you! :-
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of
cisco cabanaboy
Sent: Tuesday, June 06
it appears to be possible to do an
"
ip route 0.0.0.0 0.0.0.0 10.255.255.255
"
or some other directed broadcast..
does this work?
ever seen it before?
if this went out on an ethernet segment, and there
were 2 other routers (or more) what would happen...
=
ciscocabanaboy, CCNP-Voice,
ok... here goes...
as i understand it, if you have multiple routes with
the same Specifity, Admin distance, and Metric then
(most?) dynamic routing protocols will load balance...
and if you add yet another static route to that
destination, (not necisarrilly with the same
specifity/admin
sorry if i sent this twice, it seems like our mailing
list is having trouble :(
here is the design:
ETHERNET
|
1XXX
/\
/ \
2XXX 3XXX
-
/
ip you set up a default ip route to e0(on a point to
point), what is the destination mac address?
also, does it change anything if it is a shared
segment?
ip route 0.0.0.0 0.0.0.0 e0
=
ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH...
] wrote:
Beats me. Routers are down. Any hint is you do a
connect ? what is the
output there?
Chuck
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of
cisco cabanaboy
Sent: Wednesday, May 31, 2000 1:02 PM
To: [EMAIL PROTECTED]
Subject:
what
what is your favorite book for the ccie?
I have seen alot of reccomended book lists... but i
dont have time to read 15 books
my favorite one so far is "interconnections", radia
pearlman (sp?)
=
ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH...
does anyone have a good link on how to do this (one
that is pertinant to the CATM test)?
=
ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH...
__
Do You Yahoo!?
Send instant messages get email alerts with Yahoo! Messenger.
in what hardware do the following manifest themselves?
lec-- atm aware pc's, cat 5000?
lecs-- atm aware server ?
bus-- atm aware server ?
les-- atm aware server ???
is this right? or do you run these service off of
cisco gear? if they are servers, where does the
software come from that does
I am going to take the CATM test this weekend, and I
was wondering if anyone could tell me if there are
type in questions?, any other info/links would be
welcome.
Thank you
ciscocabanaboy CCNP-voice, CCDP...
=
ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH...
what is the global config command "connect" for ?
C2600-REG4-1(config)#?
Configure commands:
...
connect cross-connect two
interfaces
controller Configure a specific
controller
default Set a command to its
defaults
default-value
I was wondering if anyone could tell me if "CATM 2.1
Cisco Campus ATM Solutions 640-446" is worth taking to
help someone out with the atm portion of the ccie r/s
lab, also is it hard(the atm exam)
ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+,
I-net+...
anyone got a good link that shows a sample config for
an inter v-lan routing "router on a stick" ?
=
ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH...
__
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
anyone seen this before?
C2600#wr mem
Warning: Attempting to overwrite an NVRAM
configuration previously written
by a different version of the system image.
Overwrite the previous NVRAM configuration?[confirm]
startup-config file open failed (Device or resource
busy)
=
ciscocabanaboy,
has any one heard about this cert???
__
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives,
18 matches
Mail list logo