hi anyone knows what does the symbol !H means in
traceroute results
__
Do You Yahoo!?
Yahoo! Calendar - Get organized for the holidays!
http://calendar.yahoo.com/
_
FAQ, list archives, and subscription info:
I have some modules you want them?
--- Favio T <[EMAIL PROTECTED]> wrote:
> Does anyone know where I can download some cbt's for
> ccnp 2.0 for free
> thanks
>
>
_
> Get Your Private, Free E-mail from MSN Hotmail at
> http://
> - Original Message -
> From: jason yee <[EMAIL PROTECTED]>
> To: ElephantChild <[EMAIL PROTECTED]>; whatshakin
> <[EMAIL PROTECTED]>
> Cc: <[EMAIL PROTECTED]>
> Sent: Tuesday, October 24, 2000 8:03 AM
> Subject: Re: route table
>
>
> > alte
alternatively you can try clear ip bgp
soft in /out to just update the bgp table and not
flush all of them
suaveguru
--- ElephantChild <[EMAIL PROTECTED]> wrote:
> On Sun, 1 Oct 2000, whatshakin wrote:
>
> > clear ip bgp *
> >
> > Don't do this on a production network during
> business hours!
>From my experience it is better to have unnumbered
pointing to loopback as a backup or load balancing
interface since it will be better for us to
troubleshoot then
Jason
--- [EMAIL PROTECTED] wrote:
>
>
> Of course, you can always use a loopback address as
> the 'unnumbered' address,
> which
Hi,
Does anyone know how do I go about providing
redundancy in a pure
switched ethernet environment.
The ethernet environment contains different switches
mainly Catalyst
3500 series. I need to propose a redundancy solution
for all the
switches. I am wondering does that mean I need router
to p
show ip route should tell you the other side of your
network since it is directly connected
suaveguru
--- Langa Kentane <[EMAIL PROTECTED]>
wrote:
> Hi.
> I have a 2Meg link to our ISP. What I want to do is
> to figure out the IP
> address on their side of the WAN. How do I go about
> doing th
Not many clues given though
but from what you say it seems logical that you should
check the status of your serial interface see if there
are many input errors or crc errors if there are check
the clock rate of your modem
otherwise check the status of the other party that you
are connected to t
You could use ip unnumbered on loopback interface
though , in this way when the lan segment is down you
can still have the loopback interface
suaveguru
--- "Brian W." <[EMAIL PROTECTED]> wrote:
> There is one huge disadvantage. If the ether
> segment goes down in an ip
> unnumbered setup, then e
Trying do a frame-relay map statement that maps dlci
no to the ip address of the interface you are trying
to ping
suaveguru
--- "Claussen, Ken" <[EMAIL PROTECTED]>
wrote:
> I am trying to setup a Frame Relay link in a lab
> situation. We have Layer 2
> speaking LMI back and forth and the line Pr
You might want to check the LMI type follow by the
encapsulation type to see if it is ok
also set keepalive to zero to see if the interface
comes up if not you got a back interface
suaveguru24
--- Hans Stout <[EMAIL PROTECTED]> wrote:
> Hi colleagues,
>
> I have a problem with my frame relay
hi guys,
Please verify if I am right
default route and default-network serves the same
purpose , they both defines the gateway of last resort
whereas, default-gateway defines the gateway of last
resort if ip routing is not enable
Correct me if I am wrong
thanks
suaveguru
I believe is something to do with no service
statement on the top of the config file , can't
remember what is the exact service to remove but this
is it
--- Roger Wright <[EMAIL PROTECTED]> wrote:
> Dear Networkers,
>
> Please tell me how to configure my 2611 router so
> that I don't cons
Passing grade for Routing 2.0 is 690
--- "Michael H. Noble"
<[EMAIL PROTECTED]> wrote:
> Does anyone know the passing grade for the CCNP
> tests. I took the ACRC
> last year and it was 70. Do the new tests require a
> higher passing
> grade?
>
> **NOTE: New CCNA/CCDA List has been formed. For mo
You are use a router or a high end switch like 6509
with a RSM (route switch module) to do the routing for
you
--- BB <[EMAIL PROTECTED]> wrote:
> Hi
> i've setup two vlan in the switch.
> but packet can't route from one vlan to other
> vlan...
> how can i enable routing between vlan?
>
> thx
>
try www.frforum.com
--- Krishna Shankar <[EMAIL PROTECTED]> wrote:
> Hi can any one give me good url for frame relay
> material
>
> thanks in adv
>
__
Do You Yahoo!?
Yahoo! Mail - Free email you can access from anywhere!
http://mail.yahoo
hi ,
I am a instructor currently delivering CCNA course.The
setup of the classroom consists of 2 routers but I
have got 24 students telnetting to the 2 routers . I
have problems for them telnetting to the routers
because the max no of connections for the telnet
sessions are 5 , my question is how
17 matches
Mail list logo
