h other by NetBEUI. Is it this identifier number nothing
special? or is there any special function?
Thank a lot
mak
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19936&t=19936
--
FAQ, list archives, and subscription info: htt
Hi all,
I would like to know anyone work with SFM on 6500 before. Any thing I
need to pay attention when I play with SFM.
Thanks
mak
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19289&t=19289
--
FAQ, list archi
d, the BGP
connection is lost and stay in Active state.
Thanks a lot
Regards,
mak
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15859&t=15859
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list
Hi,
Would someone can tell me how can I locate the info about the difference
between different kinds of switching, such as fast switching, flow
switching, distributed fast switching etc.
Thanks
regards,
mak
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6064&am
ll be a relative
> drop-in-the-bucket after that.
>
> I haven't taken either of the labs you mention, but if you haven't worked
on
> ATM and Voice configurations, make sure that those are included in one or
> both of those labs.
>
> -e-
>
> - Original Mes
Hello All,
After spending over $25K of my own money on Cisco training within the past
18 months, my budget is running tight. Please let me know if it is worth it
to penny pinch and save to purchase the ccbootcamp labs ($650+shipping) or
solution lab's labs ($189). Is the Solution Lab's labs suffi
Apparently only the home page seem to have been hacked.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3521&t=3521
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Non
he routing table and also the other OSPF
routers in the network?
However, I always need to "clear ip route *" in some routers for quicker
response.
Thanks
Best Regards,
mak
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2909&t=2909
--
dvertised from A and B in OSPF database?
Thanks
Regards,
mak
Peter Van Oene wrote:
>
> The same route with a lower admin distance will cause this to happen. For
> example, a connected route or a static etc.
>
> Peter
>
> *** REPLY SEPARATOR *******
&g
Dear all,
Would someone can tell me is what situation the route (Type 5) can be
seen in OSPF database but not in routing table?
Thanks
Best Regards,
mak
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1530&t=1530
--
If you goto the home page of http://www.armycbt.army.mil, there is a warning
that the website is only for Army related personnel usage only. Please be
careful, you don't want to get into trouble with the US Military.
""Lim Jit Cherng"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">new
Hi,
Both commands portvlancost and portvlanpri configure different things,
but it seems that the function is just the same. So I don't know when I
should use portvlancost, when I should use portvlanpri.
mak
Udo Konstantin wrote:
Hi mak,
let me know what you want to do ?
First you can tr
Hi,
I cannot distinguish the situation I should use portvlancost or portvlanpri.
Would someone can tell me?
Thanks
mak
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
Hi,
When I saw some sample configurations, there is a loopback interface.
What is this interface use for? Should I always configure it?
Thanks
Regards,
mak
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
Dear all,
I would like to know is it any difference between two method of
configuring PVC
1. atm pvc 32 1 32 aal5snap 32000 32000
2. pvc 1/32
.
.
I am using method one, I have a problem is that I built a PVC between
two routers (12008 and 7507) running BGP, in-between is carrier
Hi,
Is it a must the primary and secondary RSP should have the same RAM
capacity? Is it ok if I install more RAM on primary RSP temporarily?
Thanks
Regards,
Raymond
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report mi
Hi all,
When I ping to a internal network from Internet. The time is very long,
it is greater than 2500ms. I would like to know what factors make this
happen, is it the routers CPU work load? or there is a routing problem?
Thanks
mak
_
FAQ, list archives, and
Hi,
Where can I find to let me know what ports map to a particular service?
It is quite hard to know to meet the requirement, such as when the
PIX works with Windows environment, need to konw NetBios ports etc.
Thanks
Regards,
mak
_
FAQ, list archives, and
Hi all,
I want to know how can I change the state of RSP2 in 7507.
That is, change the master RSP to slave RSP, change slave RSP to master
RSP.
Thanks
Regards,
Raymond
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
there are only
three interfaces to be activated?
Thanks
Regards,
mak
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I think the only good resources is the Documentation.
Regards,
mak
Jon Cuthbert wrote:
Does anyone know of any good books for the 4 exams
now required for
the Security specialisation.
I know the Managing Cisco Network Security book by Cisco Press is due
out. But what about the PIX and other
Dear all,
Anyone has taken the new three exams for security specialist, any
comment about these?
Thanks
Regards,
mak
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
Thanks
mak
Devon Watkins wrote:
> They are REGEX (Regular Expression) symbols.. used in pattern
> matching.
>
> Specifically,
>
> ^ == first character
> $ == end of line
>
> Probably not the clearest explanantion..try searching on REGEX
>
> On 2 Jan 2001 00:08
Hi,
For example, ip as-path access-list 20 permit ^100$
What is the ^$ stands for?
Thanks
mak
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dear All,
I would like to know, suppose when I traceroute to www.cisco.com.
Each entry within my network displays very slow, once outside my
network, the entry display very fast. Why this happen?
Thanks
Regards,
mak
_
FAQ, list archives, and subscription info
mak wrote:
> Dear all,
>
> As I check the Cisco Web site.
> There are two CCIE R&S Exams
> 1. R&S Qualification Exam (MC)
It seems that it is written exam. I thought it is hand-written exam rather than MC exam
:)
>
> 2. Lab exam
>
> Is the written exam
Dear all,
As I check the Cisco Web site.
There are two CCIE R&S Exams
1. R&S Qualification Exam (MC)
2. Lab exam
Is the written exam including in lab exam?
I thought there are one written exam and one lab exam.
Regards,
mak
_
FAQ, list archi
Dear all,
I would like to know if I configure like this
Router <-> Firewall <-> Router or route-switch
Is it Firewall, such as PIX or CheckPoint do not pass routing table
between routers? The better solution is using IOS FireWall?
Thanks
Regards,
mak
_
mak wrote:
> Hi all,
>
> I would like to know default is it OSPF already load-balancing?
> Is it only true that, suppose when 1 to 1 router WAN connection?
1 to 1 router with two WAN connections
>
> How about can I configure load-balancing when 2 to 2 routers WAN
>
Brian wrote:
> On Wed, 6 Dec 2000, mak wrote:
>
> > Hi all,
> >
> > I would like to know default is it OSPF already load-balancing?
>
> yes 4 equal cost paths by default.
>
> > Is it only true that, suppose when 1 to 1 router WAN connection?
>
> th
Hi all,
I would like to know default is it OSPF already load-balancing?
Is it only true that, suppose when 1 to 1 router WAN connection?
How about can I configure load-balancing when 2 to 2 routers WAN
connection?
Thanks
Regards,
mak
_
FAQ, list archives, and
Hi,
And also which topics I should pay more attention?
Thanks
Regards,
mak
mak wrote:
> Hi all,
>
> Would you post again the materials need for the MCNS, such as books or
> online materials please?
>
> Thanks
>
> Regards,
> mak
>
> __
Hi all,
Would you post again the materials need for the MCNS, such as books or
online materials please?
Thanks
Regards,
mak
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
Hi all,
It seems that LANE does not have much advantage.
In what situation I need to / is better to use LANE?
Thanks
Regards,
mak
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
How about cisco GSR 12000 series?
mak
Circusnuts wrote:
> Totally depends on the router... If you have say a 4700, the boot image is
> copied to a 4 Meg Flash stick... if you have a 2500, it's a physical
> changeout...
>
> Need more information...
>
> Phil
Hi,
I would like to know "copy tftp flash" is used to upgrade IOS, how about
upgrading boot image
Thanks
Regards,
mak
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
Hi,
Is it possible to configure LANE on router, eg 7500 series, since I just
see examples of LANE configuration on Catalyst 8400 etc in Cisco site?
Thanks
Regards,
Raymond
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Repo
, even I have added OSPF.
What is the problem? Is the IOS do not let me do it this way because of
the private address?
Thanks you for your help
Regards,
Raymond Mak
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
I have solved the problem now.
Regards,
Raymond Mak
Raymond Mak wrote:
> Hi,
>
> I have local and global connection to Internet.
> When I trace from local site to internal network, it passes through
> local connection, and when I trace from global site to internal network
Hi,
I have local and global connection to Internet.
When I trace from local site to internal network, it passes through
local connection, and when I trace from global site to internal network,
it can pass through global connection. But the strange thing is when I
trace from internal network to lo
Hi,
Would you tell me is it many "product-specific" questions in this paper?
Thanks
Regards,
Raymond
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.gr
Hi,
Would you tell me how to flush the bgp routing table to make it learn
again?
Thanks
Regards,
Raymond
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://ww
Hi,
I would like to know how to configure PVC with CBR 20M?
Is it just, for example, "atm pvc 32 1 32 aal5snap 2 2" is
enough in the ATM subinterface?
Thanks in advance
Best Regards,
Raymond Mak
**NOTE: New CCNA/CCDA List has been formed. For more information
ource (any) would be internal network, destination (any) would
be outside.
Is it, for 2, the source would be outside network, destination would be
internal network?
Am I wrong with this kind of "point of view"?
Thanks
Raymond
Raymond Mak wrote:
> Hi,
>
> I am just a beginner. I hav
Hi,
I am just a beginner. I have a question is that should I need to type
any command to "enable" using ip extended access-list?
It is because when I add an ip access-group for standard access-list on
an interface, it works and no side-effect. But when I add an extended
access-list on an interfac
As title
Thanks
Regards,
Raymond
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription inf
Hi,
Would someone can tell what is the difficulty of the exam?
And also I have a quick look on the book "Cisco WAN Quick Start", but it
seems that it does not contain materials about AXIS. Where can I find
more materials about AXIS?
Thanks
Best Regards,
Raymond
___
Hi,
Sorry it is not a Cisco-related questions.
But I really would like to know is there any newsgroup discuss FORE
products?
Thanks
Raymond
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http:
Hi,
I am just CCNA 1.0 and 2.0 certified, and would continue to fullfill
CCNP.
I would like to know if I need to maintain CCNP cert every 2 years,
should I must need to maintain CCNA also?
Thanks
Raymond
___
UPDATED Posting Guidelines: http://www.groupstudy.com/
49 matches
Mail list logo