Hi,
I was able to upgrade from the standard edition to the enterprise version on
a switch with the image cat1900EN_9_00_03.bin.bin, but am not getting any
VLAN configuration utilities.Which version is required for VLAN
configuration.
Thanks
Nandit
_
FAQ, list
Hi Group,
On my 2500 routers I am connecting to the console using the aux port and am
able to access the CLI.However I am not able to get the same through console
port.Where have I goofed?
Thanks
Nandit
_
FAQ, list archives, and subscription info: http
only the setup mode prompt and the console hangs after that> How can i
resolve this
Thanks
Nandit
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi,
I was trying to figure out a dream lab setup for covering ccna,np,ie and
other cisco certs.could u please add your thopughts on this.
Thanks
nandit
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
running 5.37.
hope this helps
nandit
>
>>
>> >
>> >
>> > > Date: Sun, 7 Jan 2001 17:45:17 -0500
>> > > From: "Jon O'Nan" <[EMAIL PROTECTED]>
>> > > Subject: ATQ0H0
>> > >
>> > > I've b
making some
silly mistake? How do I regain control over my console? please help
Thanks in advance
nandit
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http
Hi group,
Why is there a access list and a access group command when we need to
specify an access list to an interface.why do we key in access list in the
config mode and access group in the interface config mode?
Please clarify
Bye
nandit
___
UPDATED Posting
Dear Group,
I have a 1602 router which was working fine.All of a sudden hyperterminal
went blank.I am not able to get any display other than the cursor the
console cable and the hyperterminal works fine with the other 1602
router,2500 router and the 1900 switch.On checking the boot led indicators
Why dont you try
www.2wire.com
nandit
"net974 at Yahoo"<[EMAIL PROTECTED]> wrote in message
<010601c01235$894c0080$0c01a8c0@Gunjan>...
Hi,
We are going to upgrade our bandwidth for 1
mbps, and my ISP is try to give me that but i have do
Hi,
As Erick says No-ip route cache will give no output when you do a show arp
and cache contents cannot be viewed.
The default setting is 4 hours if I am right
bye
nandit
"Erick B." wrote in message
<[EMAIL PROTECTED]>...
>
>Hi,
>
>On the interface config, you may hav
Hi,
I am a CCNA and am studying for my BSCN now I
also work as a network engineer for microhard technologies.could you please
include me in your study group.
Thanks and Regards
nandit
tries.
There is Good and Bad everywhere.
nandit
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21097&t=21097
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
12 matches
Mail list logo