Hi Navin
I suspect your problem is that you do not specify all the networks
connected to your router under RIP. This means that RIP will only
advertise the networks you specify. Try the following configuration (it
should solve the problem):
On Router Cisco2610:
router rip
t; Newsgroups: groupstudy.cisco
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, March 20, 2001 12:03 AM
> Subject: A Simple Rip configuration Error
>
>
> > Hello Everyone ,
> > I am facing a problem while configuring RIP on my network , my
> network
> > is as fo
Lets see your subnet masks...
- Original Message -
From: Navin Parwal <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Tuesday, March 20, 2001 12:03 AM
Subject: A Simple Rip configuration Error
> Hello Everyone ,
> I am faci
Hello Everyone ,
I am facing a problem while configuring RIP on my network , my network
is as follows :
I have two Cisco 2600 series routers which are connected back to back .
1) On the fisrst Router Cisco2610 my configuration is as follows :
Ethernet0/0 11.100.10.1
Serial0/0 200.
4 matches
Mail list logo