Here is the logon, a wr t, a sh int and the logoff. Debug aaa accounting and
Debug Radius were turned on.
-Richard
Nov 14 07:26:56: RADIUS: Initial Transmit id 7 192.168.0.100:1645,
Access-Reques
t, len 78
Nov 14 07:26:56: Attribute 4 6 C0A8001E
Nov 14 07:26:56: Attribute 5 6
Is it still true that Cisco does not support AAA accounting under Radius? I
have set up a radius server and one of my routers to authenticate to it.
This works fine, however, there are no accounting records being sent from
the router I have configured
aaa accounting commands 0 use-radius
I have been doing accounting from my routers to a Ciscosecure ACS Radius
server for some time now. So I know that you can do it.
Richard Newman wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Is it still true that Cisco does not support AAA accounting under Radius?
I
have
I am sure then that I am missing some configuration parm then. I have
several routers running IOS 11.2, 12.0 and 12.2. The router in question is
running IOS 12.0(19). Here is my router config at the end. I know that my
radius server (FreeRadius v0.3) is accepting accounting infomation because
in
After turning on debug radius I get the following error when the router
attempts to send accounting information:
RADIUS: unsupported accounting type 3 for user xx
So does this mean I have a configuration problem in my users file for my
radius server?
-Richard
Message Posted at:
I've never seen that error before.
Perhaps you could post the entire output from debug radius and debug aaa
accounting, while some user is trying to input commands.
Richard Newman wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
After turning on debug radius I get the
6 matches
Mail list logo