Re: Another CCIE Written Question [7:17050]

Thanks for sharing questions from the CCIE written... let us know if you have any more... Wright, Jeremy wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Can you have collisions on a serial link? Thanks again. Message Posted at:

Re: Another CCIE Written Question [7:17050]

Howard, Does is it really matter if it is BSC or SDLC multidrop network. In an IBM SDLC network you are dealing with Master/SLave design so you will never get collisions becuase the Master controlls the transmission time Most are full duplex, so in those cases, no you shouldn't.. Brian

Re: Another CCIE Written Question [7:17050]

This isn't an actual answer to your question about BSC and SDLC, which Howard can do, but for all of you wondering about this issue, I recommend chapter 3 of Tannenbaum, Computer Networks. He goes into lots of interesting details about how to allocate a single broadcast channel among

Another CCIE Written Question [7:17050]

Can you have collisions on a serial link? Thanks again. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=17050t=17050 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and

Re: Another CCIE Written Question [7:17050]

Most are full duplex, so in those cases, no you shouldn't.. Brian Sonic Whalen Success = Preparation + Opportunity On Thu, 23 Aug 2001, Wright, Jeremy wrote: Can you have collisions on a serial link? Thanks again. Message Posted at:

Re: Another CCIE Written Question [7:17050]

A serial link, is not a shared media. Serial link is used for point to point connection = no collision U can have collision if Tx is connected on Tx on the other side of the cable, but if the cable and interfaces (X21, V24 ...) are good, there's no collision. -- Stephane LITKOWSKI Student in a

Re: Another CCIE Written Question [7:17050]

Most are full duplex, so in those cases, no you shouldn't.. Brian Sonic Whalen Success = Preparation + Opportunity On Thu, 23 Aug 2001, Wright, Jeremy wrote: Can you have collisions on a serial link? Thanks again. I'm in general agreement, but be aware that you might run into IBM BSC

Re: Another CCIE Written Question [7:17050]

I think this is actually more of a CCNP troubleshooting question. Think about the type of media you're dealing with. Collisions happen on media that allow multiple devices to speak at the same time. If the media or topology does not allow multiple access then you cannot have collisions. On

RE: Another CCIE Written Question [7:17050]

]] Sent: Thursday, August 23, 2001 4:13 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject:Re: Another CCIE Written Question [7:17050] I think this is actually more of a CCNP troubleshooting question. Think

Re: Another CCIE Written Question [7:17050]

Tis why I said most and shouldn't :) I expected the longtime lurkers to come back with a couple that weren't full duplex. Brian Sonic Whalen Success = Preparation + Opportunity On Thu, 23 Aug 2001, Howard C. Berkowitz wrote: Most are full duplex, so in those cases, no you shouldn't..

Re: Another CCIE Written Question [7:17050]

I agree with you. Serial link is not always full duplex. It depends of the relation between the two entities : primary/secondary (Normal mode : SDLC - SNRM frame) or Balance mode (LAPB - SABM frame). -- Stephane LITKOWSKI Student in a french computer science school EPITA Telecom Network

RE: Another CCIE Written Question [7:17050]

]] Sent: Thursday, August 23, 2001 4:13 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject:Re: Another CCIE Written Question [7:17050] I think this is actually more of a CCNP troubleshooting

Re: Another CCIE Written Question [7:17050]

I think this is actually more of a CCNP troubleshooting question. Think about the type of media you're dealing with. Collisions happen on media that allow multiple devices to speak at the same time. If the media or topology does not allow multiple access then you cannot have collisions. On

Re: Another CCIE Written Question [7:17050]

When I first started at the bank as a teller, we were running 9600 bps multidrop lines. but, luckily for me, I was blissfully unaware of anything related to networking at the time, so I didn't notice. ;-) By the time I started in the department we had upgraded to 56k frame relay with Motorola

Re: Another CCIE Written Question [7:17050]

At 05:23 PM 8/23/01, Howard C. Berkowitz wrote: Most are full duplex, so in those cases, no you shouldn't.. Brian Sonic Whalen Success = Preparation + Opportunity On Thu, 23 Aug 2001, Wright, Jeremy wrote: Can you have collisions on a serial link? Thanks again. I'm in

Re: Another CCIE Written Question [7:17050]

In a message dated 8/23/01 3:29:24 PM Central Daylight Time, [EMAIL PROTECTED] writes: Subj: Another CCIE Written Question [7:17050] Date: 8/23/01 3:29:24 PM Central Daylight Time From: [EMAIL PROTECTED] (Wright, Jeremy) Sender:[EMAIL PROTECTED] Reply-to: [EMAIL PROTECTED

Re: Another CCIE Written Question [7:17050]

At 05:23 PM 8/23/01, Howard C. Berkowitz wrote: Most are full duplex, so in those cases, no you shouldn't.. Brian Sonic Whalen Success = Preparation + Opportunity On Thu, 23 Aug 2001, Wright, Jeremy wrote: Can you have collisions on a serial link? Thanks again. I'm

Re: Another CCIE Written Question [7:17050] ASCII art got [7:17085]

At 05:23 PM 8/23/01, Howard C. Berkowitz wrote: Most are full duplex, so in those cases, no you shouldn't.. Brian Sonic Whalen Success = Preparation + Opportunity On Thu, 23 Aug 2001, Wright, Jeremy wrote: Can you have collisions on a serial link? Thanks again. I'm